JBL TWS Earbuds Instructions: Learn How to Use and Control
- June 7, 2024
- JBL
Table of Contents
The JBL TWS Earbuds User Guide is a comprehensive manual that provides users with all the necessary information to use and control their JBL TWS earbuds. The guide includes instructions on how to wear the earbuds, power on and connect them, manual controls, button commands, charging, LED behaviors, and technical specifications. Additionally, the guide features a FAQ section that answers common questions about the product, such as how to connect the earbuds to a device, how to reset them, and how long they last on a single charge. The guide also includes a video tutorial that provides users with a visual demonstration of how to use the earbuds. Whether you are a first-time user or an experienced one, the JBL TWS Earbuds User Guide is an essential resource that will help you get the most out of your JBL TWS earbuds.
JBL TWS Earbuds
JBL TWS Earbuds
WHAT’S IN THE BOX
HOW TO WEAR
First-time use
POWER ON & CONNECT
Pairing
POWER OFF
Manual Controls
BUTTON COMMAND
Charging
LED BEHAVIORS
TECH SPEC
| Driver size: | 5.8 mm Dynamic driver |
|---|---|
| Frequency response: | 20 Hz – 20 kHz |
| Sensitivity: | 93 dB SPL |
| Maximum SPL: | 93 dB |
| Microphone sensitivity: | – 40 dBV/Pa |
| Impedance: | 32 ohm |
| Bluetooth transmitter power: | < 10 dBm |
| Bluetooth transmitted modulation: | GFSK, π /4 DQPSK, 8DPSK |
| Bluetooth frequency: | 2.402 GHz – 2.480 GHz |
| Bluetooth profile version: | A2DP 1.3, AVRCP 1.6, HFP 1.7 |
| Bluetooth version: | 5 |
| Headset battery type: | Lithium-ion battery (60 mAh / 3.7 V DC) |
| Charging case battery type: | Lithium-ion battery (500 mAh / 3.7 V DC) |
| Power supply: | 5 V 0.5 A |
| Charging time: | 2 hrs from empty |
| Music play time with BT on: | up to 5 hrs |
| Weight: | 58 g |
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by HARMAN
International Industries, Incorporated is under license. Other trademarks and
trade names are those of their respective owners.
FAQ’S
Does the JBL TWS earbuds work with Apple products?
Yes, the JBL TWS earbuds work with Apple products.
What is the difference between the JBL TWS and the JBL T450BT?
The JBL TWS is a wireless headset while the T450BT is a wireless headphone. The TWS has an in-line remote control and microphone, while the T450BT has a built-in remote control and microphone.
How long does it take to charge the TWS earbuds?
It takes approximately 2 hours to fully charge the TWS earbuds.
How long do the TWS earbuds last on a single charge?
The TWS earbuds have up to 5 hours of music playback time on a single charge.
How do I turn on/off the TWS earbuds?
To turn on/off the TWS earbuds, press and hold down on either one of the volume buttons for 3 seconds. The power light will illuminate when turned on and will blink red when turned off.
What do I do if my headphones are not connecting to my device?
First make sure that your device is within range of your headphones (10 meters). If you are still experiencing issues connecting your headphones, please try resetting your headphones by holding down both volume buttons for 5 seconds until you hear a tone indicating that your headphones have been reset. If you continue to experience problems connecting your headphones, please contact our customer care team at 1-800-898-9020 or email us at customerservice@harmanaudio.com.
How do I connect my TWS JBL earbuds?
Start searching for new Bluetooth devices and select your JBL earbuds from the dropdown menu (For Android this will likely be in available devices). Your earbud should now be connected to your phone and once you remove your other earbud it will automatically connect to the other
How do I know when my JBL earbuds are fully charged?
Full charge: The LED indicator on the right earbuds turns off. Low battery: Only one LED indicator on the charging box blinking white. Charging: Two LED indicators on the charging box flashing white. Full charge: All of the LED indicators on the charging box turns off.
How do I reset my JBL earbuds?
Press and hold the ‘Volume +’ and ‘Volume –’ buttons until the LED indicator light begins to blink. This should be about 15 seconds. Once the LED light begins to blink, the pairing settings have been reset. Now, turn the Bluetooth on your device on again.
Why is one side of my JBL earbuds not working?
When the two earpieces begin to pair, sometimes the left side is unable to automatically pair together, leaving you to suffer one-sided audio if you don’t remedy the issue. Take out the right earbud from the charging case. It will begin attempting to pair, you can discern this from a blinking blue light.
Why is my wireless left earbud not working?
One side of your wireless earbuds may not be working because your first time setting the earbuds up might not have run properly. Other reasons include a bug (which requires a manual reset), needing to be reconnected to your other device using Bluetooth and actually having damage to the hardware.
How do I reset my earbuds?
Place both earbuds in the charging case.
Keep the case lid open and hold the earbuds near your Android or iOS device.
Scroll down to locate and select “About Earbuds.”
Choose the “Reset” option.
VIDEO
JBL TWS Earbuds
www://id.jbl.com/en/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>