SOUNDPEATS TWS Wireless Bluetooth Earbuds True Wireless User Manual

June 7, 2024
SoundPEATS

SOUNDPEATS TWS Wireless Bluetooth Earbuds True Wireless User Manual

Package Content

diagram

Product Diagram

  1. Multifunction Button
  2. LED Indicator
  3. Microphone
  4. Charging Contactor
  5. Charging Case
  6. Charging Slot
  7. USB Charging Port
  8. Charging Case LED Indicator

Specifications

  Bluetooth Prole   Bluetooth 5.0, AVRCP, HFP, HSP, A2DP
  Bluetooth Chipset   Realtek 8763BFR
  Maximum Working Range   33 feet / 10m (no obstacle)
  Play Time   3-4 hours (varies by volume and audio le)
  Charging Time   1.5 hour
  Charging Case Recharge Earbuds   9-10 times (both earbuds)
  Earbud Capacity   43mAh
  Charging Case Capacity   800mAh
Earbud Dimension (L W H)   0.960.860.64 inches / 2421.916 mm
  Earbud Weight   0.16oz / 4.7g

Wearing

  1. Identify the left and right earbuds.
  2. Insert the earbuds into your ears and adjust to nd best angle with microphone downwards.
  3. Make sure the eartips seal the ear canals.

Get Started

Mono Mode

  1. The earbud enters pairing mode directly with a voice prompt “power on” Directly being taken out from the charging case. White indicator ashes quickly for around
    10s, then red and white indicators ash alternately with a voice prompt “pairing”. “SOUNDPEATS Q32 Pro L” or “SOUNDPEATS Q32 Pro R” would show up on the
    Bluetooth list, hit it to connect.

  2. If you want to connect two earbuds separately with 2 devices nearby, please connect the left one to one device at first. In case it will connect to the right earbud
    automatically after being taken out from the charging case.

Stereo Mode

Take out both earbuds from the charging case. The two earbuds will fash in white at first. Then the left indicator goes out, and right indicator flashes in red and white.
Activate the Bluetooth in your device and hit “SOUNDPEATS Q32 Pro R” on the Bluetooth list.

Factory Reset

(Try the following steps if you fail building connection between two earbuds, or between earbuds and device)

  1. Clear the pairing record between the earbuds and all of your
  2. Hold and press the MFB of both earbuds for 10 seconds when in charging status, the LED indicator will flash red for 3 times if resetting

Charge

  1. Please charge the earbuds at least once every 3 months when not in use for a long time.
  2. To ensure charging safety, please do not use any USB charging adapter with current over 5V 1A. Please do not use quick charger to charge the earbuds and charging case.

Note

  1. If you don’t know which device the earbud has already connected, please turn it off, then press and hold the button for 5 seconds until red and white indicator flashes alternately to have the earbud enter pairing mode
  2. If pairing device is switched off or Bluetooth disconnected, the earbuds will stay in pairing mode for 5 minutes and then power off
  3. The earbuds can remember previously paired They would automatically connect to the last device they have paired before aNer being taken out from the case.

  Power On|   Take out the earbuds from charging case
Press and hold the MFB for 1s until white LED ashes
---|---
  Power O| Place back the earbuds into charging case
Press and hold the MFB for 3s until red indicator long ashes
once. In Stereo Mode, turn o either earbud will switch o
both units
  Play / Pause|   Press the MFB once
  Play Next / Previous|   Double tap le MFB for previous track
Double tap right MFB for next track
  Answer Phone Call|   Press the MFB once
  Hang Up|   Press the MFB once
  Reject Phone Call|   Press the MFB for 1.5s
  Mute / Resume A Call|   Double tap the MFB during a call
  Activate Voice Assistant|   Press the MFB for 1s in play / standby mode
  Transfer Voice Between
Earphones and Phone|   Press the MFB for 1s during a call
  Call Switching|   During a call, if there is another incoming call at the same
time Press the MFB to answer the second call and put the
rst on hold.
Long press 1s to reject the new incoming call.
Double tap the MFB to switch between two phone calls.
Press once to hang up the current call.

LED Indicators

  Status

|

  Earbuds LED Indicator

---|---
  Fully charged|   White indicator turns on and goes o aer 1 minute
  Pairing mode|   Red and white indicators ash alternately
  Earbuds connect to each other|   White LED indicator ashes quickly
|

  Status

|

  Charging Case Indicator

---|---
  Fully charged|   Solid Green
  Low Battery|   Both indicators ash in green 5 times every 20s

Warranty

We warrant this device 12 MONTHS from date of the original purchase for manufacturer defects.
support@soundpeatsaudio.com
www.soundpeatsaudio.com
Please scan the QR code or search the link below for detailed PDF manual :

https://soundpeatsaudio.com/downloads/

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals