comsol 10000mAh power bank Charger User Manual
- June 7, 2024
- comsol
Table of Contents
Model: PB10AL
10000mAh Power Bank Charger
User Manual v1.1
Made for
iPhone | iPad | iPod
- Power On/Off
- Micro USB Input
- USB-A Output 1
- USB-A Output 2
- Apple Lightning Connector
- Capacity LED Indicators
Suitable for
- iPhone/iPad/iPod
- Most smartphones including Samsung, LG, Sony, HTC, Nokia, Microsoft, Huawei, Motorola, Google, OnePlus, Oppo & more
- Smartwatches, fitness trackers, digital cameras, portable gaming consoles, drones, speakers, headset or earphones
Features
- Battery type: Lithium-Polymer
- 10000mAh provides 360% extra battery for an average smartphone*
- Get an extra 50 hours of talk time on an iPhone X
- Built-in Apple MFi Certified Lightning Cable
- Two extra USB-A ports to charge other portable USB devices
- Smart Power Chip identifies your device and provides maximum power for speedy charging times
- 2.1A high output for fast charging of iPad or tablet
- Rechargeable more than 500 times
- Four LED indicators to show remaining capacity
- Includes Micro USB cable to charge power bank
- Full safety protection for peace of mind for you and your devices
- Watt Hour Rating: 37Wh
- Micro USB Input: DC 5V 2.1A
- Lightning Cable Output: DC 5V 2.1A
- USB-A Output 1: DC 5V 2.1A
- USB-A Output 2: DC 5V 2.1A
- Total Output: 10W
- Charging Time: 4 to 10 hours depending on charger output
- Size: 140mm (L) x 72mm (N) x 15.3mm (H)
- Weight: 243
- Certifications: Apple MFi, RCM, RoHS
To Charge Power Bank
- To charge the power bank, use the included micro USB cable and connect the micro USB input port on the power bank to a USB wall charger
- During charging the LEDs will flash to indicate charging capacity status
- When charging is complete, all four LEDs will remain on
To Charge Phone or USB Device
- To charge an iPhone, iPad or iPod, connect the Apple Lightning connector to your iPhone, iPad or iPod
- To charge a device using either of the USB-A output,s use your device’s own charging cable
- Press the On/Off button to start charging
- During charging the LED indicators will be permanently on
To Check Remaining Capacity
- Press On/Off button & LEDs will light to show remaining capacity
- The LEDs will turn off automatically after about 30 seconds
| LED On / Off / Flashing | Remaining Capacity |
|---|---|
| Less than 5% | |
| 5% to 25% | |
| 25% to 50% | |
| 50% to 75% | |
| 75% to 100% |
Important Safety Instructions
-
To maximize battery life span, fully charge power bank before first use for 8 to 10 hours
-
Store power bank in a cool and dry place.
-
Do not store power bank in hot or humid environment
-
Operating temperature should be between -10c to 45c
-
If power bank is not used for long periods of time, you should charge and discharge once every three months
-
When charging a device, the power bank may feel warm, this is a normal operating condition and should not be cause for concern
-
In normal conditions, the battery performance will decline over several years
-
Do not dispose of power bank in heat or fire
-
Do not clean power bank with harmful chemicals or detergents
-
Misuse, dropping or excessive force may cause product damage
-
360% extra battery based on an iPhone 8 with 1821 mAh battery
Any information printed here is subject to change without notice.
iPhone, iPad and iPod are trademarks of Apple Inc., registered in the U.S. and
other countries. iPad is a trademark of Apple Inc.
All other brand names, trademarks, registered trademarks and copyrights are
the property of their respective owners.
Comsol and the Comsol logo are trademarks of Comsol Pty Ltd
www.mycomsol.com.au Made in China
Documents / Resources
|
comsol 10000mAh power bank
Charger
[pdf] User Manual
10000mAh power bank Charger
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>