HOMEWORKS HQP7-RF-2 Wireless Processor Instruction Manual

HOMEWORKS HQP7-RF-2 Wireless Processor Instruction Manual

This Home Works wireless processor is compatible with Sunnata dimmers/switches/keypads, Maestro dimmers/switches/fan controls, Pico controls, Radio Powr Savr sensors, Triathlon and Sivoia QS wireless shades, seeTouch keypads, Home Works plug-in dimmers and switches, Home Works RF dimmer and switch modules, and Ketra wireless fixtures and lamps. Other products may also be compatible; see individual product spec sheets for details on system compatibility. This HomeWorks wireless processor must be powered by an IEEE 802.3af 2003 or 802.3at 2009 compliant LPS / SELV PoE or PoE+ power supply.

Additional Components

Tools You May Need

Step 1 — Choose a Location to Install
Reliability of Clear Connect wireless communication requires that the wireless processor be centrally-located and within a maximum distance of the specific wireless devices in the system. A maximum of 16 total wired and wireless processors can be on one system. Wireless processors must be mounted 5 ft (1.5 m) away from wireless interference sources like microwaves, Wireless Access Points (WAPs), etc. PoE wiring must be kept internal to the building. Do not run PoE wiring outdoors or install the processor in metallic enclosures.

Distances for Wireless Devices

Clear Connect ­ Type A Devices (seeTouch keypads, Maestro dimmers, Pico wireless controls, Sivoia QS wireless shades, etc.)

• Each device must be within 30 ft (9 m) of a repeater or wireless processor.
• Repeaters can be spanned up to 60 ft (18 m) apart from other repeaters to create the network.

Clear Connect ­ Type X Devices

• All devices associated with the wireless processor must be within a 75 ft (23 m) radius of the processor.
• There must be a minimum of two devices within 25 ft (7.6 m) of the wireless processor.
• Each Clear Connect ­ Type X device should have two or more non-battery powered Type X devices within 25 ft (7.6 m) of another compatible Clear Connect ­ Type X device. Using more than two devices is ideal for creating an ultra high-performance mesh network.

For myLutron users, please see Application Note 745 for additional information on Clear Connect – Type X Best Practices on www.lutron.com.

Step 2 — Provide Opening for Adapter

Step 3 — Select the Mounting Adapter for your Installation
Each wireless processor comes with a recess-mount adapter and a junction box mount adapter. NOTE: To utilize the shelf-mount adapter (P/N: L-SMNT-WH, sold separately), please see the instructions included with that product.

Step 4a — Installation using the Recess-Mount Adapter

Step 4b — Installation using the Junction Box Mount Adapter

Step 4c — Installation using the Shelf-Mount Adapter (P/N: L-SMNT-WH, sold separately)

• Hold the adapter to the wall in the desired location
• Using a pencil, mark the location of the screw holes
• If using drywall, prep for anchors
• Partially drive two (2) screws at least 1/4 in (6.3 mm) into the wall or the drywall anchors
• Feed right-angle connector of the 6 ft (1.8 m) Ethernet cable through the adapter BEFORE tightening screws
• Tighten screws
• Plug in Ethernet cable and attach processor to PoE-enabled network switch or PoE injector
• Attach processor to adapter

Step 5 — System Setup
Add the processor into the HomeWorks Designer software. Note: Ensure you are using the latest version of the HomeWorks Designer software.

LED Diagnostics

Troubleshooting

For additional troubleshooting information, please see www.lutron.com/support

FCC / IC / IFT Information
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio / TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with FCC/ISED radiation exposure limits set for an uncontrolled environment. The user should avoid prolonged exposure within 7.9 in (20 cm) of the antenna, which may exceed the FCC/ISED radio frequency exposure limits.
Controlling this HomeKit®-enabled accessory automatically and away from home requires a HomePod®, Apple® TV, or iPad® set up as a home hub. It is recommended that you update to the latest software and operating system.

Communication between iPhone®, iPad®, Apple Watch®, HomePod®, or Mac® and the HomeKit®enabled HomeWorks processor is secured by HomeKit® technology. Use of the Works with Apple® badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple® performance standards. Apple® is not responsible for the operation of this device or its compliance with safety and regulatory standards.

The Lutron logo, Lutron, Athena, HomeWorks, Sunnata, Ketra, Maestro, myRoom, Pico, Radio Powr Savr, Triathlon, Sivoia, seeTouch, and Clear Connect are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. Apple, Apple Watch, HomeKit, HomePod. iPad, iPhone, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. All other product names, logos, and brands are property of their respective owners. ©2021-2022 Lutron Electronics Co., Inc.

Customer Assistance
For questions concerning the installation or operation of this product, please visit www.lutron.com/HWsupporthttps://qrco.de/bc6piZ

Limited Warranty
For limited warranty information, please scan the code below with a smartphone.https://qrco.de/bc6q1V

References

• Lutron Support Center
• Lutron Support Center | Lutron

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>