logitech Professional Axes Levers Simulation Controller User Guide
- June 7, 2024
- Logitech
Table of Contents
FLIGHT THROTTLE QUADRANT
Professional Axes Levers Simulation Controller
USER GUIDE
logitechG.com
FLIGHT/VOLVUELO
YOKE SYSTEM
MULTI PANEL
RUDDER PEDALS
RADIO PANEL
INSTRUMENT PANEL
SWITCH PANEL
Build your whole cockpit with our modular, interchangeable system.
GETTING STARTED: QUADRANT
**INTRODUCTION
**
Congratulations on buying the Logitech G Flight Throttle Quadrant. The Flight Quadrant features realistic controls configurable for all the major flight simulation software to make your flying experiences more realistic.
INSTALLING THE THROTTLE QUADRANT
First, screw the clamp to the throttle
quadrant using the four screws provided.You can screw the clamp to one of two
sides of the quadrant depending on how you want to mount the quadrant – either
in front and below your table or on top of it. Please note that whichever way
you choose to mount the quadrant, ensure that as you look at the unit the
rocker switches are at the bottom. Now tighten the throttle unit clamp screw
mechanism until it is firmly attached to your table (be careful not to
overtighten the screw as you may damage the clamp).
Plug the throttle quadrant’s USB cable into one of your PC’s free USB ports
(or Logitech G Flight Yoke USB Hub). Your throttle quadrant comes supplied
with additional lever knobs to configure any combination of throttle, flaps,
mixture or prop pitch. You can also buy additional quadrants to link together
for more complex multi-engined airplane configurations and we have included a
4-way throttle knob that links 4 quadrant levers for control of 4-engined
aircraft.
INSTALLATION FOR WINDOWS® 10, WINDOWS® 8.1 AND WINDOWS® 7
DRIVER INSTALLATION
- Visit logitech.com/support/throttle-quadrant to download the latest drivers and software for your operating system.
- With device disconnected, follow the onscreen instructions to complete the installation.
- At the Driver Setup screen, only when prompted, insert USB cable into one of your computer’s USB ports, then click Next.
- At the Driver Setup screen, click Next to test your controller.
- When the Logitech Controller screen appears, test the controls to verify device operation. After the test, click OK.
SOFTWARE INSTALLATION
- In the Software Setup screen, click Next and a pop-up box will ask if you “want to trust software from Logitech.” Click yes, then click Next.
- After installation, you have the option to Run Profile Editor, which will show you the programming environment. To skip the Profile Editor now, uncheck the box and click Finish to complete installation.
IMPORTANT INFORMATION
DRIVER UPDATES
From time to time there may be updates to the driver and programming software
for this product. You can check for the latest software updates by visiting
the Logitech website (support.logitech.com)
ENABLING YOUR CONTROLLER IN THE GAME
Most games support game controllers, but typically default to the mouse and
keyboard until you go into the option menu within the game. The first time you
start a game after installing your controller, go to the options menu within
the main menu of the game and make sure your controller is set up correctly.
If you are having trouble working out how to do this, or if you’re unsure
whether the game itself supports game controllers, then please refer to the
user manual of that game for more help.
HOW TO ASSIGN QUADRANT CONTROLS TO FLIGHT SIMULATOR FUNCTIONS
As you will normally be using the Pro Flight Quadrant alongside another
controller in Flight Simulator, you will need to ensure that you set the
levers up correctly within the game. By default, Flight Simulator will assign
them to control the ailerons, elevator and throttle, which will normally be in
addition to that which your other controller is already controlling; this will
cause problems! To reassign the levers correctly, you must use the Assignments
(Flight Simulator 2004) or Controls (Flight Simulator X) screen within the
game. This is accessed from the Settings menu within the game.
When you access the Assignments/Controls screen in Flight Simulator, ensure
that the Logitech G Flight Throttle Quadrant is selected in the option labeled
Joystick Type. Now select Joystick Axes (Flight Simulator 2004) or Control
Axes (Flight Simulator X) at the top of the window. O
nce you have done this, simply find the command that you want to assign to
your controller from the list of commands, click it and then click the Change
Assignment button. A window will appear asking you to move the part of your
controller that you want to assign to that command – move the axis that you
want to assign to that command and then click OK.
Tip: You must ensure that none of the levers are assigned to the Aileron
Axis or Elevator Axis commands, otherwise they will interfere with the other
controller that you are using alongside the Logitech G Flight Throttle
Quadrant. If you wish to reassign the toggle switches on the Quadrant to other
functions then you must use the Buttons/Keys tab at the top of the
Assignments/Controls window.
For more information to programming and using your Throttle Quadrant go to:
logitech.com/support/throttle-quadrant
TECHNICAL SUPPORT
Online Support: support.logitech.com
References
- Logitech Support + Download Sustainability Navigation
- Logitech G - Advanced Gaming Gear for the Ultimate Gaming Setup
- Logitech Support + Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>