Best BUY essentials Full Color LED Tape Light User Manual
- June 7, 2024
- BEST BUY essentials
Table of Contents
**8 ft. Full-Color
LED Tape Light
BE-LED8RGB19
** Quick Setup Guide
Before using your new product, please read these instructions to prevent any
damage.
WARNING: Unroll before use. Never plug in the LED lights when rolled up,
as this can result in product damage or a fire.
Package contents
- LED tape light
- USB power supply
- Double-sided tape
- Quick Setup Guide
Features
- Produces custom lighting with 20 color options
- Attaches to TVs, cabinets, and other objects
- Adjust the brightness level with a multi-step dimmer
- Cuts to whatever length is needed
- Reduces eye strain from TVs and monitors
- Powered by USB or AC adapter
- Built and backed by Best Buy
Using your tape light
Shortening your tape light
• Use a pair of scissors to cut on a cut line. Cut lines are about 1.3 in.
(3.3 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the center of
the copper-colored pads, as shown.
Attaching your lights
1. Peel the adhesive backing off the lights, then adhere the lights where you
want them.
2. Optional: Attach the double-sided tape to the back of the light control,
then adhere it where you want it.
Notes:
• Make sure that the tape light is unrolled, otherwise, it can damage the tape
light or cause a fire.
• Every surface is different, and additional adhesive may be used if the LED
tape detaches from the surface. Small pieces of clear tape can be used.
Connecting to power
• Connect the USB connector to your USB power supply, then plug the USB power supply into a power outlet.
OR
• Connect the USB connector to your TV, computer, or other USB power source.
Adjusting the lights
If you turn off or unplug your tape light, it will remember your last
brightness and color settings.
• Press (POWER) to turn the tape light on and off.
• Press (COLOR) repeatedly to change the color combination. There are 20
selectable colors, including white.
• Press (BRIGHT) repeatedly to adjust the brightness.
There are eight brightness levels.
Specifications
• USB power supply (included): 5V DC, 2A
• Power input: 5V DC, 0.5A minimum (2A recommended)
• Tape light length: 8 ft. (2.4 m)
Troubleshooting
LEDs will not turn on.
- Press the power button to make sure that your lights are turned on, then press (BRIGHT) to increase the brightness.
- Make sure that your lights are connected to a working USB port or power outlet. If connected to a computer, turn on your computer.
- Make sure that your lights are plugged into the USB power supply, then make sure that the USB power supply is plugged into a working power outlet.
- If your lights are plugged into a USB port on a TV, computer, or other devices and they are not working, use the included USB power supply.
- If you are trying to reach full brightness, especially with white light, use a 2A power supply. Your tape light will still function with lower-output power supplies, just at reduced brightness. Using the included USB power supply will ensure the best performance.
- LEDs flicker or turn on and off.
- Make sure that your lights are plugged into a working power outlet or USB port. Try plugging into a different power source.
- Use the included USB power supply for best performance.
- Make sure that the cable is not damaged.
Safety information
- To avoid damage to the light strip, do not sharply twist or bend the light strip 90°or more.
- Do not cut the silver solder markings. Only cut in the center of the copper-colored pads.
- Do not plug in your lights when they are coiled. This can generate excess heat which can damage the product or connected device.
Legal notices
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
ICES statement:
CAN ICES-3 B/NMB-3 B
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy Essentials
For customer service, call 866-597-8427
(U.S. and Canada)
www.bestbuy.com/bestbuyessentials
Best Buy Essentials is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>