ULINE Tape Dispenser User Guide

ULINE Tape Dispenser User Guide

ULINE Tape Dispenser User Guide

2

| Top Cover Hinge with Screw

Includes:

• Hinge (2)

• Nut (2)

• Screw (2)

|

1

|

H-1360-40311

|

RP40311

3

| Water Bottle with Valve

Includes:

• Bottle (1)

• Duckbill Valve (1)

• Tank (1)

|

1

|

H-1358WB

|

RP40401

4| Brush Tank| 1| H-1358-BRTNK| RP40405
5| Moistening Brush| 1| H-1358B| RP40407

6

| Right Side Cover Assembly

Includes:

• Side Cover (1)

• Screw (6)

• Handle Hole Plug (1)

• Stop Assembly (1)

|

1

|

H-1358-RCVR

|

RP41301

7| Power Switch| 1| H-1359-PWRSW| RP150536

8

| Handle

Includes:

• Handle Arm (1)

• Handle (1)

• Handle Insert (1)

• Washer (1)

• Screw (1)

• Nut (1)

|

1

|

H-1358-HNDL

|

RP41257

9| Handle Hole Plug| 1| ———-| RP43102
 | Inch Measuring Strip (Not Shown)| 1| ———-| RP41260
 | Metric Measuring Strip (Not Shown)| 1| ———-| RP41262
 | Stop Bolt (Not Shown)| 1| H-1358-KNOB| RP41290

3

| Top and Free Roller Assembly

Includes:

• Roller (1)

• E-Clip (2)

• Side Cover (1)

|

1

|

———–

|

RP40522

4| Left Side Cover| 1| H-1358-LCVR| RP-40305
5| Rear Water Bottle Bracket| 1| H-1358-WBBKT| RP40404
6| Front Water Bottle Bracket| 1| H-1358WBB| RP40403
7| Cutter Guard| 1| H-1358-CUTTR| RP40325

8

| Pinch Roll Assembly

Includes:

• Pin (1)

• Spring (2)

• E-Clip (6)

• Shaft (1)

• Holder (1)

• Roll (1)

|

1

|

H-1358-40540

|

RP40540

9

| Cutter Return Spring Assembly

Includes:

• Spring (1)

• Damper (1)

• Screw (1)

• Nut (2)

• S-Hook (1)

|

1

|

H-1358-SPRIN

|

RP41905

10| Cutter Slide Bolt| 1| H-1358-41904| RP41904
 | Fixed Blade Stop (Not Shown)| 1|  | RP40825

4

| Tape Guide Assembly

Includes:

• Turnbuckle (1)

• Guide RHS (1)

• Guide LHS (1)

|

1

|

———–

|

RP40550

5| 90° Strain Relief| 1| ———–| RP42956
6| Dome Plug| 1| ———–| RP42957
7| Split Bushing| 1| ———–| RP42958
8| Urethane Feed Wheel with Shaft| 1| H-1360-40235| RP40235
9| Gearbox Motor Mount Frame| 1| ———–| RP41101

10

| Drive Gear With Springs

Includes:

• Drive Gear (1)

• Spring (1)

|

1

|

H-1359-GEAR

|

RP5065X

11

| Clutch Roller Assembly

Includes:

• Clutch (1)

• Pin (1)

|

1

|

H-362-CLUTCH

|

RP5063X

12

| Brush Tank Cover with Rod & Bushing

Includes:

• Weighted Tank Cover (1)

• Screw (2)

• Brass Bushing (1)

• Rod (1)

|

1

|

H-1360-BTCRB

|

RP40516

13

| Tape Weight with Screw

Includes:

• Weighted Tank Cover (1)

• Screw (1)

• Pin (1)

|

1

|

H-1358-TPWGT

|

RP40517

14| 3/8″ Bearing| 1| ———–| RP40231
15| 1/2″ Bearing| 1| ———–| RP41221
16| Dead Roller| 1| H-1360-40560| RP40560

17

| Handle Shaft Assembly

Includes:

• Shaft (1)

• Screw (4)

• E-Clip (1)

|

1

|

H-1358-41220

|

RP41220

18| Washer| 1| ———–| RP16172

2

| Cutter Actuating Arm Assembly

Includes:

• Arm (2)

• Spring (2)

• E-Clip (6)

• Shaft (1)

• Screw (2)

• Nut (2)

|

1

|

H-1358-41258

|

RP41258

3

| Cutter Replacement Kit

Includes:

• Cutter Blade Holder (1)

• Cutter Blade – Movable (1)

• Fixed Blade (1)

• Spring (4)

• Fixed Blade Shoe (1)

• Set Screw (1)

• Screw (4)

• Bushing (4)

• Cutter Guide (2)

|

1

|

H-1360-BLREP

|

RP40703

4

| Cutter Blade – Movable

Includes:

• Cutter Blade – Movable (1)

• Screw (2)

• Set Screw (1)

|

1

|

H-1358-BLADE

|

RP40710

5

| Cutter Blade – Fixed

Includes:

• Fixed Blade (1)

• Spring (4)

• Fixed Blade Shoe (1)

• Screw (2)

|

1

|

H-1358-FIXED

|

RP40715

6| Cutter Spring – Fixed Blade| 1| H-1360-40740| RP40740

7

| Heater/Thermostat Assembly 110V Includes:

• Water Tank Assembly (1)

• Thermostat 110V (1)

• Screw (9)

• Nut (2)

• Heater 110V (1)

• Wire

• Wire Connector

|

1

|

———–

|

RP40231

7a

| Heater/Thermostat Assembly 220V Includes:

• Water Tank Assembly (1)

• Thermostat 220V (1)

• Screw (9)

• Nut (2)

• Heater 220V (1)

• Wire

• Wire Connector

|

1

|

———–

|

RP41221

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>