Tianjian W3M Wifi Bulb Camera User Guide

Tianjian W3M Wifi Bulb Camera

Product Information

• Specifications:
  • Model: PMN: IP CAMERA
  • Power Input: AC 110-240V
  • Connectivity: 2.4G Wi-Fi
  • Holder Type: E27 bulb holder
• Product Information:
  • The PMN: IP CAMERA is a Wi-Fi bulb camera designed for easy installation and usage.
  • It features a power input of AC 110-240V and connects via 2.4G Wi-Fi.
  • The camera is compatible with E27 bulb holders, making it convenient for ceiling installation.
• Installation and Placement:
  • Connect the camera to an E27 connector for power input.
  • Install the camera on the ceiling using the E27 bulb holder.
• Usage Instructions:
  • Download the Cloud APP for camera setup and management.
  • Ensure proper Wi-Fi connectivity (2.4G recommended).
  • Follow in-app instructions for device pairing.

FAQs

• Q: Why is the pairing network unsuccessful?
  • Ensure the network credentials are correct and the camera is within range.
  • Check if the Wi-Fi network supports 2.4G frequency.
  • Make sure there are no obstructions between the camera and the Wi-Fi router.
  • Verify settings compatibility between the camera and the network.
• Q: Why is there no playback available in the app?
  • Check local storage space availability.
  • Ensure the camera recording settings are configured properly.

Interface description

• This manual is suitable for various types of cameras.
• (The appearance may be different due to different batches.
• The details are subject to the receipt.
• This manual is only for the Installation instructions of this series of equipment)

WIFI Bulb camera

Description

1. Reset button
   • press seconds re shore ence, crop settings, the camera will have a voice prompt broadcast.
2. SD card slot
   • TF card, storage video and playback video.
3. Power supply
   • Power input.

Installation and placement

WIFI Bulb camera

Software Installation

APP Download and installation

• Users can search”EseeCloud(IP Pro, VR Cam)” on the APP store or Google Play, or scan the QR code below to install the APP.
• Note: For the iOS system, it requires an iOS 9.0 version or above. For Android, Android 5.1 or above.

INSTALLATION STEPS

• Step 1
  • If you are prompted to open certain permissions (such as location, message notification, etc.) during APP installation, click Allow (agree).
• Step 2
  • Account register: Open the APP, click”Register”, and enter your email or phone number to create an account.
  • Account login: On the login interface, enter the account/ phone number/email, and the corresponding password, and click the “OK” button to log in.
  • Third-party login: The APP supports third-party login. Click the third-party social software icon, jump to the APP to complete the authorization and log in.

Bluetooth adding process with network

“Before adding & camera, please make sure that the Bluetooth function of the mobile phone has been turned on, and do not turn off the Bluetooth during the adding process. If a prompt box pops up during the adding process to enable Bluetooth or Bluetooth authorization, please follow the steps in the prompt to enable it;

• Step 1

  • After the camera is powered on, open the “EseeCloud “APP and click the “+” icon in the upper right corner to enter the interface for adding devices. (If the permission prompt pops up, click agree)

• Step 2

  • The APP will automatically search for a new device and click the Add button when it finds the device.
  • (If you do not see the pop-up device box, please click “scan to add” to scan the QR code on the camera body)

• Step 3

  • Enter the WIFI name and password on the distribution network screen.

• Step 4

  • After the network is configured successfully, the system prompts you to enter the device name. Click Next.

• Step 5

  • Users can choose to enable or disable message push according to their own preferences (generally recommended to enable)

• Step 6

  • Congratulations, you have successfully connected the device,

Or you can add camera by WiFi configuration

• Step 1
  • Open the APP, click the “+” icon in the middle of the interface to enter the scan code interface;
• Step 2
  • Click the “Camera scan code add” method
• Step 3
  • Check whether the camera light is blinking
• Step 4
  • Select the WiFi that the camera needs to connect to, enter the password, and click Next;
• Step 5
  • Point the camera at the QR code that appears on the screen of the phone
• Step 6
  • After the network configuration is successful, set a name for the camera.

Help FAQ

• Q1: Why is the pairing network unsuccessful?

1. Please make sure that the distance between the camera, the router and the mobile phone should be close enough when configuring the network.
2. Please make sure that the WiFI signal connected to the mobile phone 2.4G Wifi and 5G WiFi are both ok.
3. Please check whether the WiFI name and password are correct.
4. Please long-press the reset button for 5 seconds and try again after restoring the camera to the factory settings.

• Q2: Why is there no playback?

1. Make sure that the TF card has been inserted into the camera and try to turn on/off the camera.
2. Enter the camera settings menu to check the storage status ‘in good condition’ (If the status is abnormal, click to “Format the memory card”)

• Q3: Why is the camera offline?

1. It may caused by router WIFI signal interference or network reasons. Power off and restart the optical modem, router or camera.
2. The camera may be too far away from the WIFI router, try to get the camera next to the WIFI router.
3. Whether the WIFI password has been changed, try to reset the camera and try pairing again.

• Q4: Why my phone does not have an alarm push function or two-way audio?

1. Check your mobile phone permission settings, and make sure that enable the notification permission of the “EseeCloud” App.
2. Open your phone’s Settings > Apps and Notifications, and select Apps and Notification Management respectively. find the “EseeCloud” app, and turn on all permissions.

After Service

1. Thanks for your purchase and support, we appreciate all your valuable feedback.
2. If you have any questions about our products, please feel free to contact us.
   • Email: usservice@isecugroup.com.
   • bulb camera uses Instructional video

FCC

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. Suppose this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on. In that case, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exemptRSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance. This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. This radio transmitter (ISED certification number: 31926-W3M) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having again greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

References

• The Universal Group of Companies - Specialists in High Speed Bent Shank Tapping Applications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>