SUPERATV Multiple Polaris RZR Radiator Installation Guide
- June 7, 2024
- SUPERATV
Table of Contents
2753 Michigan Road • Madison, Indiana 47250
•855-743-3427
INSTALLATION INSTRUCTIONS
Heavy Duty Radiator:
for multiple Polaris RZR®models
– Avoid burns and scalding by working on cool vehicles.
– Use manufacturers recommended coolant.
– Verify that no leaks are present after installation.
CUSTOMER NOTIFICATION AND DISCLAIMER LIABILITY
This product is a modification for utility task vehicles and all-terrain
vehicles. Use this product at your own risk.
Warranty and Liability Limitations. The Buyer hereby assumes all risks
associated with the use and/or installation of this product. Buyer waives all
liability claims against SuperATV®of any kind or nature, including, but not
limited to, liability for penalties, fines, property damage, personal injury
or death, to the fullest extent permitted by law. Buyer acknowledges and
agrees that SuperATV ® is not liable for any direct, indirect, incidental,
consequential or special damages, including but not limited to, damage, loss
of life, loss of property or equipment, loss of profits or revenue, injury, or
claims from any individual or entity arising from the use of this product.
The warranty for this product, if any, may give you (“Buyer”) specific legal
rights, and the Buyer may also have other rights which may vary from state to
state. The installation of this product may void or otherwise adversely affect
your factory warranty. Consult your vehicle warranty before using this
Product. Under no circumstances will SuperATV ®be liable for the voidance of
the Buyer’s vehicle warranty. Buyer assumes all risk and responsibility if a
manufacturer and/or dealer voids the Buyer’s vehicle warranty due to use of
this Product.
Safety and Laws. Operate your vehicle at all times in a safe manner. You
must abide by all local, state, and federal laws, including but not limited to
vehicle safety, traffic laws, and ordinances. It is your responsibility to
know the laws and how they apply to you. The installation of this product may
violate certain local, state, and federal laws. Be advised that laws vary
depending on the town, city, county, state, etc. Use of this product on public
streets, roads, or highways may be in violation of law. The Buyer is solely
and exclusively legally and personally responsible for any violation of the
law by the installation or use of this product. In no case will SuperATV ® be
held liable if the Buyer violates the law or uses the product in an unsafe
manner.
The Buyer is responsible to fully understand the capability and limitations of
his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to hold SuperATV®harmless from any damage resulting
from failure to adhere to such specifications, warnings and/ or instructions.
The Buyer is also responsible to obey all applicable federal, state, and local
laws when operating his/her vehicle while using this product, and the Buyer
agrees to hold SuperATV ®harmless from any violation thereof.
Installation. The installation of this product on your vehicle indicates
that you have had the opportunity to inquire about applicable local, state,
and federal laws and ordinances and that you have read and understand, and
accept all of the terms of, this Disclaimer. SuperATV® shall not be
responsible for the proper installation, use, and service of this product.
Rather, the Buyer shall be solely responsible for the installation of the
product and any damage that may be done to the vehicle or vehicle components
as a result of modifications made by the Buyer.
Read instructions and view illustrations before beginning.
Need help with your installation?
|
|
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
– Transfer stock Fan to new Radiator. Secure with stock hardware.
– If not installed, install Nipple.
– Reverse steps taken during removal and install new Radiator. TRAIL / S
models see pages 8 – 9 for
installation of Radiator.
– Ensure that there is no interference before connecting Hoses and tubes.
– Interference between Radiator Shroud and HDR-1-33 Radiator may occur on
some machines. See pages 5 – 6 for modifications.
– 2018 and up XP1000 machines see page 7 for lower plastic modification.
– Before removing Hose Clamps, fill the Radiator completely with anti-freeze.
– Bleed Radiator if necessary and check the fluid level after running the
machine for 30 minutes.
Radiator Shroud Modifications
Radiator Shroud Modifications continued
Repeat for the opposite side of Radiator Shroud.
XP1000 Lower Plastic Modification
RZR®Trail / S installation
Side Mount; disregard; not used in this application
Documents / Resources
|
SUPERATV Multiple Polaris RZR
Radiator
[pdf] Installation Guide
Multiple Polaris RZR Radiator, Radiator
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>