make it real 1323 Butterfly Jewelry Set Instructions
- June 9, 2024
- make it real
Table of Contents
make it real 1323 Butterfly Jewelry Set
INSTRUCTIONS
CONTAINS
1 Elastic choker with lobster clasp
- Butterfly Shaped hair clip
1 PlayTray
-
1 Clear elastic cord 4 m (4.4 yds}
-
Nylon cord 2 m (2.2 yds)
-
charms
- assorted beads
Not included
.
LEGEND
Scissor
Adhesive tape
Craft glue
Let dry
Knot
Double knot
Repeat
FLOWER BEAD BRACELET
Measure and cut 1 piece of 60 cm (23 ¾ in) of elastic cord.
Leaving 8 cm (3 in), tape one end onto a flat surface.
Thread 4 pink beads and one golden bead onto the elastic cord.
Thread the elastic cord through the first pink bead again.
Thread 2 pink beads onto the elastic cord. 
Thread the elastic cord through the fourth pink bead again. 
Thread a golden bead and repeat steps 3 to 6 until there are 12 flowers on the
bracelet. Use different bead colors for each flower. 
Make a jeweler’s knot 
Secure the knot by covering it with a drop of craft glue or clear nail polish. Allow 5 minutes to dry and cut off any excess cord after the knot
BEAD BRACELET
Measure and cut 30 cm (12 in) of elastic cord.
Attach
the cord to the working surface with a piece of adhesive tape. 
Thread the beads onto the cord following the sequence shown.
Make a jeweler’s knot.
Secure the knot by covering tt with a drop of craft glue. Allow 5 minutes to dry, then cut off the excess lengths of cord after the knot
Repeat steps 1 to 4 to make the other beaded bracelet.
BUTTERFLY HAIR CLIP
Measure and cut 30 cm (12 in) of elastic cord.
Follow the image below.
Thread
the beads onto the cord following the sequence shown 
Make a double knot using the ends of the cord. 
Secure the knot by covering it with a drop of craft glue. Allow 5 minutes to
dry, then cut off the excess lengths of cord after the knot. 
Butterfly choker
Attach the butterfly charm to the choker using the lobster clasp.
BRAIDED BRACELET
Measure and cut 3 pieces of 50 cm (19.5 in) of light pink satin cord.
Seal the ends of each string with a drop of clear nail polish. 
Arrange
the beads as shown. Slide the beads halfway upstring “A” 
Fold string “b” in half to find the center. Align the center next to the
beads. 
Tie a simple knot to secure string “b” to string “a”.
How to make the braid:
Slide the big golden bead over the braid. 
Make a simple knot at the end of the braid. 
Cut off the remaining ends of the strands. 
Fold string “c” in half and align the center next to the pink bead. 
Attach string “c” to string “a” with a simple knot. 
Repeat step 6 until the braid is 15 cm (6 in) long 
Wrap the end of the braid with adhesive tape. 
Thread the taped end through the gold bead. 
Remove the tape and make a simple knot
with the ends of the braids. 
Repeat the same steps to create light blue braided bracelet following the
pattern below 
WARNING!
- CHOKING HAZARD – small parts. Not suitable tor children under 3 years. Functional sharp points.
- STRANGULATION HAZARD- Functional long cord-Adult supervision required
Before wearing the bracelets, gently pull on them to make sure they are well
secured!
Avoid submerging bracelets in water.
EU Authorized Representative (Toys)
MOSS GmbH, Schiffgraben 41, 30175 Hannover, OE
Made in China
MAKE IT REAL
1700 Reisterstown Rd Ste 211
Pikesville MD 21208 USA
410-995-8685
Jactin House, 24 Hood Street
Ancoats Urban Village, Manchester,
M4 6WXUK +44 (0) 1613024100