Danfoss FCP 106 VLT DriveMotor User Guide
- August 28, 2024
- Danfoss
Table of Contents
Danfoss FCP 106 VLT DriveMotor
Specifications
- Model: MG03N202
- Manufacturer: Danfoss
- Programming Software: MCT 10 Set-up Software
- Communication Protocol: Modbus RTU
- Control Panel: Graphical Local Control Panel (GLCP)
- Network Interface: RS485
Programming
The frequency converter can be programmed using the MCT 10 Set-up Software or
the Graphical Local Control Panel (GLCP). Follow the menus provided to set up
parameters for open-loop or closed-loop applications.
RS485 Installation and Set-up
For RS485 communication, ensure proper EMC precautions are taken. Configure network settings and parameter settings for Modbus communication as per the provided guidelines in the manual.
Modbus RTU Overview
Understand the Modbus RTU message framing structure including fields like Start/Stop, Address, Function, Data, CRC Check, etc. Learn how to access parameters and control the frequency converter using Modbus RTU function codes.
FAQs
Q: How do I back up parameter settings?
A: To back up parameter settings, use the provided functionality in the
programming software or control panel to save the current configuration to a
file on a separate storage device.
Q: What do the alarm and warning words signify?
The alarm words indicate critical issues that require immediate attention,
whereas warning words signify potential issues that should be monitored but do
not require immediate action.
References
- Global AC drive manufacturer - Danfoss Drives | Danfoss
- Global AC drive manufacturer - Danfoss Drives | Danfoss