VANKYO LEISURE 430W Projector User Manual

LEISURE 430W
USER MANUAL
Please read this manual thoroughly before using this product and keep it for future reference.
v1.01

PACKING LIST

NOTICE

FUNCTION OVERVIEW

QUICK START

INPUT SOURCE

Press on the projector or remote to enter the interface of the Input source.

PROJECTOR CONNECTION

SCREEN MIRRORING

Important:
Before screen mirroring, please press the button on the projector/remote to enter the interface of Input Source and select Screen Mirroring.

Screen Mirroring through Wireless Connection
For SOS System

• Streaming with cellular data

  1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for the iOS System.
     
     

  2. Go to the settings of your iOS mobile device and connect it to the WiFi of LEISURE430W-XXXXXX (PWD: 12345678 ). Please ignore the exclamation mark before it.

  3. Activate Screen Mirroring/AirPlay Mirroring function on your iOS mobile device, then search for the projector.
     
     

  4. Select LEISURE430W-XXXXXX from the searching results to connect.

  5. The display of your iOS mobile device will be projected to the wall/screen via cellular data after a successful connection.

* Streaming with your router’s WiFi

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for the iOS System.
   

2. Go to the settings of your iOS mobile device and connect it to the WiFi of LEISURE430W-XXXXXX (PWD: 12345678 ).

3. Visit http://192.168.49.1 from a browser on your mobile device, tap WiFi AP > Scan, select your router’s WiFi, and enter the right password, then tap Connect to continue.
   

4. Your router’s WiFi will be displayed on the interface of Screen Mirroring for iOS System after a successful connection.
   

5. Get back to the WiFi setting of your iOS mobile device, then connect it to the same router’s WiFi.

6. Activate Screen Mirroring on your iOS mobile device, then search for the projector and select LEISURE430W-XXXXXX from the searching results to connect.

7. The live streaming content from your iOS mobile device will be projected to the wall/screen through a WiFi connection.

Tip:
If you’d like to connect to another router’s WiFi, please repeat the procedures mentioned in the section of Streaming with your router’s WiFi.

For Android System
To activate this function, your android device must support a Multi- Screen/Wireless display. Names may differ from different devices.

1. Turn on the projector, select Screen Mirroring as the Input Source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.
   

2. Turn ON the WiFi Switch on your Android device. Successfully connected WiFi on an Android device is not a must unless live streaming content is needed.

3. Activate the Multi-Screen function on your Android device and search for the projector.

4. Select LEISURE430W-XXXXXX from the searching results to connect.

5. Your Android device. the display will be projected to the wall/screen after a successful section.

Notes:

1.  The fluency of screen mirroring with wireless connection will be affected oy the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using a wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screens. UI;rroring due to the compatibility.

• Upgrade The Firmware Version of Screen Mirroring
  When there is a newer version, you will see Discover new firmware… on the projected screen, please press the button on the projector re note and follow the steps to upgrade the firmware version of the screen mirroring needed.

Notes:

1. Make sure the projector is connected to WIFI and DO NOT power off during updating.
2. It takes around 6-8 minutes for the update to complete, please wait patiently.
3. The screen mirroring system will restart once the upgrade is completed.

Tip:
After entering the interface of Screen Mirroring for the iOS system, you can press and hold the OK button to reset the firmware version of screen mirroring.

Screen Mirroring with the Original USB Cable
The iOS System

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for the iOS System.

2. Connect your iOS mobile device to the USB port of the projector with the ORIGINAL lightning cable.

3. Select Trust in the pop-up window of Trust This Computer.
   

4. The display of your iOS mobile device will be projected to the will/screen after a while.

For Android System

1. Turn on the projector, select Screen Mirroring as the input source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System
   

2. Go to the settings of your mobile device, find Developer options, and turn on USB debugging.
   Tip:
   The steps to turn on Developer options vary from different models of Android devices. You may check it from the Internet or contact us for the detailed steps. We take Samsung Galaxy S8 + as an example.

• Go to settings of your Android device, then tap **About phone > Software information > Build number.
  *** Continuously tap on Build number several times until it shows Developer mode had been turned on.
• Get back to the settings of your mobile device, it will show Developer options. 3. Connect your Android mobile device to the USB port of the projector with the ORIGINAL USB cable. 4. Tap OK when your Android mobile device pops out the window of Allow USB debugging? , then your Android device will be projected to the wall/screen.

Notes:

1. The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data, otherwise screen mirroring may fail. You can plug the cable into your laptop to check the availability of transferring the data.
2. Some mobile devices may not support screen mirroring due to compatibility.
3. Some Android mobile devices may only transfer the display without audio due to protocol restrictions.

PROJECTION DISTANCEδSIZE

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed
  *Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

1.22kg (2.681b)
Photo Format Supported| BM P/JPG/PNG/GIF/JPEG| Audio Format Supported| ACC/MP2/MP3/PCM/FLAC/WMA
Video Format Supported| AVI/MP4/MKV/FLV/MOV/ RMVB/3GP/MPEG1/ MPEG2/H.264/XVID| Ports| HD In x 1/USB2.0 Port x 1/ VGA Port x 1/AV In x 1/ Audio Out x 1/Memory Card Slot x 1
Mounting Screw| 1/4″| Number of Screws| Not included

TROUBLESHOOTING GUIDE

1. The content from Hutu, Netflix, and similar services can not be mirrored or cast.

• Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast. 2. What should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector?
  *Please prepare a Fire TV stick, Roku stick, or Chromecast (not included), then connect it to the projector to watch the content. 3. Blurry Image
• Adjust focus ring/keystone.
• Projector and screen/wall must be ineffective distance. 4. Remote Unresponsive ” Make sure remote points at IR receiver directly.
• Do not cover IR receiver.
• Try a new pair of AM batteries. 5. Up Side Down Images
• Enter “Menu” on projector or remote to flip the projection image.

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   NOTE; This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   —Reorient or relocate the receiving antenna.
   —increase the separation between the equipment and receiver.
   —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
   —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
   This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. (1) this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.
   The device is in compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 20cm.

The symbol indicates AC voltage

RECYCLING

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. The user has the choice to give this product to a competent recycling organization or the retailer when he buys new electrical or electronic equipment. This product can be used across EU member states. The device is a low-power device, it can meet the requirement of the RF exposure. EU Compliance Statement: Shenzhen VanTop Technology & Innovation Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at https://doc.vantop.com/.

support.uk@ivankyo.com

VAN KYO SUPPORT

North America            support@ivankyo.com
United Kingdom         support.uk@ivankyo.com

https://qrs.ly/diad7dp                    https://qrs.ly/fc7wkt2                     https://qrs.ly/awad7ea

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>