VANKYO Leisure 3W PRO Wireless 720P Mini Projector User Manual
- October 27, 2023
- VANKYO
Table of Contents
- Leisure 3W PRO Wireless 720P Mini Projector
- WHAT’S INCLUDED
- PRODUCT OVERVIEW
- QUICK START
- Images Adjustment
- Homepage Overview
- MULTIMEDIA CONNECTION
- SCREEN MIRRORING
- SETTINGS
- PROJECTION DISTANCE&SIZE
- SPECIFICATION
- TROUBLESHOOTING GUIDE
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LEISURE 3W (PRO)
USER MANUAL
Leisure 3W PRO Wireless 720P Mini Projector
Please read this manual throughly before using this product and keep it for future reference.
WHAT’S INCLUDED
PRODUCT OVERVIEW
QUICK START
-
Projector Installation
Note: Whichever installation option you select, please make sure: 1. the projector is centered directly in front of the wall/screen, but not tilted or angled toward it; 2. to select the corresponding projection mode so the images can be projected correctly.
-
Power On/Off
Images Adjustment
-
Rotate the Keystone Correction Ring to correct Vertical Keystone Distortion until the image is evenly rectangular.
-
Rotate the Focus Ring to sharpen the Image Focus until the blurred image becomes clear.
Homepage Overview
The default interface after booting is Homepage as shown.
* Media.* Displays file categories of Multimedia input(USB Disk or Memory
Card), including Movie, Music, Photo and Text.
Source. Displays three categories of input source, including HDMI, VGA
and AV.
Miracast. Enter to start screen mirroring for Android devices.
iOS Cast.** Enter to start screen mirroring for iOS devices.
* Setup. Guides you through all setting options for the projector.
MULTIMEDIA CONNECTION
USB Disk/Memory Card Connection
Step 1: Turn on the projector and insert your USB Disk/Memory Card into
the USB port/Memory Card Slot.
Step 2: Go to Homepage > Media and
select the file category you would like to display among Movie, Music, Photo
and Text, then enter the inserted USB Disk/Memory Card to check all files
stored.
Step 3: To play a video file, please follow the below steps:
- Select Movie to correspondingly read video files stored.
- Press OK / on the projector/remote for a certain video file to enter full-screen display.
- Press OK on the projector or press OK/ on the remote when playing a video to bring up the toolbar to control the video playing.
Note:
Operation for playing a music file, a photo file and a text file is the same
with that for playing a video file, but make sure to select the correct file
catergory; that is, for playing a music file, select Music in Media interface;
likewise, for photo, select Photo, for text, select Text.
Step 4: Press [Dl on the projector/remote to go back to Homepage.
File Category | Format Supported |
---|---|
Video | AVI/MKV/MOV/MP4/FLV/VOB/ MPEG1/M PEG/RMVB/3GP/ H.264/XVID |
Photo | JPEG/BM P/PNG/J PG/GIF |
Music | MP2/MP3/WMA/AAC/FLAC/PCM |
Text | TXT |
HD Connection
Step 1: Turn on the projector and connect your device to the HDMI port of
the projector with the provided HD cable.
Step 2: Go to Homepage> Source, select HDMI as the input source, then the contents of your device will be mirrored to the screen/wall.
Tip:
For Windows 7 or higher system, press the “Windows Logo+ P” key combination to
access the below four display modes.
- PC screen only option displays contents on computer screen only.
- Duplicate option displays the same contents on both computer screen and projected screen.
- Extend option splits the display between the computer screen and the projected screen.
- Second screen only option displays contents only on the projected screen.
AV Connection
Step 1: Turn on the projector and connect your device to the AV Port of
the projector with an AV cable(not included).
Step 2: Go to Homepage> Source, select AV as the input source, then the
contents of your device will bmirrored to the screen/wall.
VGA Connection
Step 1: Turn on the projector and connect your device to the VGA port of
the projector with a VGA cable(not included).
Step 2: Go to Homepage> Source, select VGA as the input source, then the
contents of your device will be projected to the screen/wall.
Note :
For better viewing experience, you can press [= to bring up the tool bar and
change settings about Image,
Sound and VGA Set (Exclusive for VGA Input) for contents from HDMI, AV and VGA
connection.
Image: Enter to set Image Mode, Aspect Ratio, Brightness, Contrast,
Color and Sharpness.
Sound: Enter to select a desire Sound Mode and set Bass, Treble,
Balance and Equalizer.
***** VGA Set: Enter to access Auto Adjust, HPosition, VPosition, Phase and
Frequency.
SCREEN MIRRORING
For iOS System
Screen Mirroring via Router’s WiFi
-
Go to Homepage> Setup to enter Settings interface, then select Network> WiFi> Scan to search and connect the projector to your router’s WiFi.
-
Enter WiFi settings of your iOS device and connect it to the same router’s WiFi.
-
Return the screen back to Homepage, then select iOS Cast to enter the following interface.
-
Activate Screen Mirroring/AirPlay Mirroring in the Control Center of your iOS device and search for the projector.
-
Select ZYCast-xxxx(icast) from the searching list to connect.
-
The contents on your iOS device will be mirrored to the wall/screen after a successful connection.
Tip:
To activate screen mirroring function of your MacBook, please follow the below
steps:
- Click Control Center icon in the menu bar at the top of the Mac screen.
- Click Screen Mirroring to search for the projector.
- Select ZYCast-ooxx(icast) to connect.
Screen Mirroring via Cellular Data
-
Go to Homepage > iOS Cast to enter the following interface.
-
Enter WiFi settings of your iOS device and connect it to the WiFi of Projector AP-000x.
-
Activate Screen Mirroring/AirPlay Mirroring in the Control Center of your i0S device and search for the projector,
-
Select ZYCast-xxxx(icast) from the searching list to connect.
-
The contents on your iOS device will be mirrored to the wall/screen.
For Android System
To activate this function, please make sure your Android device supports
Multi-screen/Wireless display. Names may differ from one Android device to
another.
-
Turn on the WiFi switch on your Android device.
Note:
Successful WiFi connection is not a must, but please make sure the WiFi switch on your Android device is ON. -
Go to Homepage > Miracast to enter the following interface.
-
Activate Multi-Screen function on your Android device and search for the projector.
-
Select ZYCast-xxxx(mcast) from the searching list to connect.
-
The contents on your Android device will be mirrored to the wall/screen after a successful connection.
Note:
For screen mirroring through wired connection, please prepare an extra
Lightning/Micro USB/Type C to HDMI adapter to connect your mobile device with
the projector.
Notes:
- Due to copyright restrictions of Hulu, Netflix, and similar services, the contents CAN NOT be mirrored or cast.
- If the projected image freezes, check the network connection; or reboot the projector, then go to Homepage > Setup > Advanced > Restore Factory Default and select Confirm to do a reset on the projector.
- The fluency of screen mirroring will be affected by the network connection. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
- Make sure your mobile device is close to the projector when using wireless connection. A distance within 3ft is recommended.
- Some mobile devices may not support screen mirroring due to the compatibility.
SETTINGS
Go to Homepage> Setup to enter the following interface, then press G / [B to toggle through menu options including Network, Projection, Advanced and Information and preview their corresponding submenu lists. Press / to enter a certain submenu and press to return to the main menu bar.
-
Network
Go to WiFi > Scan to search and connect the projector to your router’s WiFi. -
Projection
***** Projection Mode
Depending on how you position your projector, you may need to change projection modes so that the
images can be projected correctly. Available options include Front Desktop(default), Rear Desktop, Front
Ceiling and Rear Ceiling. -
Advanced
Language
Enter to select a language for the projector.
Boot Source
Set your desire booting screen for the projector. Options include Home(default), HDMI, VGA, AV and Media.
-
Sleep Timer
Set the time duration for the projector to shut down automatically. Options include Off, 10min, 20min, 30min, 60min, 90min and 120min.
iOS Play Mode Set to mirror or cast contents on your iOS devices. When you select screen mirroring SD, you are mirroring the screen of your device after a successful connection; otherwise, when you select screen casting SD, you can cast a video to the projected screen and still use your device without interrupting the video.
Local Update
Update the projector using a USB disk with upgrade file. (Contact our customer service to get the
upgrade file.)
Online Update Enter to update the firmware of the projector when a newer version is available.
Restore Factory Default
Restore the projector to the factory settings.- Information
Displays detailed information of the projector, including Model Number, Memory, Extended Storage and Software Version.
- Information
PROJECTION DISTANCE&SIZE
The recommended projection distance varies with different projection
contents. Please adjust the distance between the wall/ screen and the
projector properly as needed.
Ambient darkness will improve the clarity of the projected images.
SPECIFICATION
Display Technology | LCD | Light Source | LED |
---|---|---|---|
Resolution | Native 1280 x 720 | Input Signal | 576i, 576P, 720i, 720P, 1080i, |
1080P
Installation Type| Front/Rear/Ceiling| Aspect Ratio| 16:9/4:3/Auto
Focus| Manual| Electronic Keystone| ±15°
Speaker| 2W/8ohm x 2| Power Supply| AC 100-240V, 50/60Hz
Unit Dimension| 7.8 x 5.9 x 2.7 inches
(198 x 148.6 x 68mm)| Unit Net Weight| 1.98 lbs (0.9kg)
Photo Format Supported| JPGE/BMP/PNG| Audio Format Supported| ACC/M P2/M
P3/PCM/FLAC/ WMA
Mounting Screws| M4 Metric| Screw Number| 1
Video Format
Supported| AVI/M P4/M KV /FLV /MOV /RMVB/3G P/M PEGl/M PEG2/H .264/XVI D|
Ports| USB Port x 1 / HD In x 1 / AV In x 1/VGA Port x 1/Audio Out x 1/Memory
Card Slot x 1
TROUBLESHOOTING GUIDE
-
The contents from Hulu, Netflix, and similar services can not be mirrored or cast.
Due to the copyright restriction from Hulu, Netflix, and similar services, the contents CAN NOT be mirrored or cast. -
what should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector?
Please prepare a Fire TV stick, Roku stick or Chromecast” (not included), then connect it to the projector. -
Blurry Image
Adjust focus ring/keystone.
Projector and screen/wall must be in effective distance. -
Remote Unresponsive
Make sure remote points at IR receiver directly.
Do not cover IR receiver.
-
Try a new pair of AAA batteries. 5. Upside Down Images
Go to Homepage> Setup> Projection> Projection Mode to flip the projection image.- Factory Reset
Go to Homepage> Setup> Advanced> Restore Factory Default, then select Confirm to reset the projector to default settings.
- Factory Reset
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF exposure guidelines, users can obtain
Canadian information on RF exposure and compliance.
The minimum distance from body to use the device is 20cm.
CAUTION
To avoid replacement of a battery with an incorrect type.
Don’t dispose of a battery into fire or a hot oven, or mechanically crush or
cut a Battery.
Don’t leave a battery in an extremely high temperature surrounding
environment.
To avoid battery subjected to extremely low air pressure.
The mains plug is used as the disconnect device, the disconnect device shall
remain readily operable.
**** | D The symbol indicates for indoor use only |
---|---|
case«man | |
The symbol indicates DC voltage | |
The symbol indicates AC voltage |
****RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
nvironment.User has the choice to give this product to a competent recycling
organization or the retailer when he buys a new electrical or electronic
equipment.
This product can be used across EU member states.
The mains plug is used as the disconnect device, the disconnect device shall
remain readily operable.
EU Compliance Statement: Shenzhen Van Top Technology & Innovation Co., Ltd.
hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of the Directive 2014/53/EU. A copy
of the EU Declaration of Conformity is available online at
https://doc.vantop.com/.
VANKYO SUPPORT
North America support@ivankyo.com
United Kingdom support.uk@ivankyo.com
| https://qrs.ly/fc7wkt2
---|---
| https://qrs.ly/awad7ea
| https://qrs.ly/diad7dp