VANKYO Leisure 470 Pro Native 1080P Phone Projector User Manual

VANKYO Leisure 470 Pro Native 1080P Phone Projector User Manual

What’s Included

• Projector

• Remote (Batteries Not Included)

• User Manual
  

• HD Cable

• Power Cable

• Carrying Bag

Notice

Recommended

Not Recommended

Product Overview

Quick Start

1. Plug the power cord into an outlet.

2. Take off the lens cover
   
   

3. Connect your device to the projector correctly.
   

4. Press the Power Button to turn on the projector.

5. . Select the correct input source by pressing the button 
   

6. . Adjust the kickstand accordingly

7. Adjust the keystone and focus ring to get the best image performance.
   

8. . Press the Power Button twice to turn off the projector.
   

Projector Connection and Input Source

Connect your device to the projector correctly, then select the right input source on the homepage.

1. USB Connection
   

2. TF Card Connection
   

3. HD Connection
   This option is for connecting a device with an HDMI output port
   

4. AV Connection
   

Wi-Fi Connection
Go to Homepage > Settings > Network Setting to connect the projector to your router’s Wi-Fi.

Screen Mirroring

For iOS System

Screen Mirroring Wirelessly

Step 1 : Connect the projector and your mobile device to the same router’s Wi-Fi or directly connect your mobile device to the projector’s AP hotspot.

Tip: When you are using the projector’s AP hotspot, the content will be mirrored via the cellular data.

Step 2 : Go to Homepage and select iOS Cast to enter the interface below.

Mirror your iPhone, iPad or iPod touch:

Make sure that your iOS device is connected to the same network as your projector, or connect iOS device with AP by projector:

1. On your iOS device, open control centre and tap Screen Mirroring
2. Looking for devices that can be mirrored on.
3. Select NETLINK-XXXX-(icast) from the list.
   

Step 3 : Activate Screen Mirroring / AirPlaying Mirroring in the Control Centre of your iOS device and search for the projector.
Step 4: Select NETLINK-(icast) from the searching list. The contents on your iOS device will be mirrored on the projection screen/wall after a successful connection.

Screen mirroring via a Lightning Cable
Step 1 : Go to Homepage and select iOS Cable to enter the interface below.

iOS Cable Cast:

1. Connect the lightning connector to the phone. Connect the other end to the projector.
2. Click “Trust” on the window that pops up on the screen.
3. Enter device password

Step 2 : Connect your mobile device to the USB Port on the projector using the ORIGINAL
lightning cable.
Step 3 : Select Trust in the pop-up window of Trust This Computer?
Step 4 : The contents on your iOS device will be mirrored on the projection screen/wall
after a successful connection.

For Android System
To activate this function, please make sure your Android device supports Multiscreen/Smart View/Wireless Display. Names may vary on different Android devices.
Step 1: Go to the Wi-Fi settings of your Android mobile device to switch on the option of Wi-Fi.
Note: Successful Wi-Fi connection is not a must, but please make sure the Wi-Fi switch on your Android device is ON.
Step 2 : Go to Homepage and select Miracast to enter the interface below.

Miracast:
To connect Android / Pad Device with Projector Based on Wi-Fi-Display Technology:

1. On your Android Mobile / Pad, open the settings menu.
2. Access your display settings or screen-mirroring.
3. Select your Miracast receiver NETLINK-XXXX.
4. Wait for the connection

Step 3 : Activate the Multi-screen/Smart View/Wireless Display function on your Android device and search for the projector.
Step 4 : Select NETLINK-XXXX from the searching list. The contents on your Android device will be mirrored on the projection screen/wall after a successful connection.

Settings

1. . Press the Menu button on any interface to check the PICTURE, SOUND and OPTION settings.

• Picture
• Sound
• Option

Tips :

1. After you select User in the option of Picture Mode, you can change the settings of the Contrast, Brightness, Colour, Tint and Sharpness to adjust the image quality.
2. If you select User in the option of SOUND, you could change the settings of the Treble and Bass to adjust the sound effect.
3. When you are using the USB connection or HD connection on the projector, the  option of Aspect Ratio will be activated. You can then adjust the aspect ratio of the projection image.

Go to Homepage > Settings to connect the projector to a Wi-Fi network, change language, restore the projector to factory settings, change the projection mode and adjust the image size.

Projection Distance and Size

The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.

• Ambient darkness will improve the clarity of the projected images.

Specifications

Display

Technology

| LCD| Light Source| LED
---|---|---|---
Resolution| Native 1920 x 1080| Input Signal| 576i/720P/1080i/1080P
Aspect Ration| 4:3/16:9/Auto| Focus| Manual
Keystone| ±15°| Installation Type| Front/Rear/Ceiling
Speaker| 3 W/7 ohm| Power Supply| AC 100-240 V, 50/60 Hz
Unit Dimension| 19814575 mm

(7.85.73 inches)

| Unit Net Wight| 1 kg (2,2 lbs)
Photo Format

Supported

| BMP/JPG/PNG/JPEG| Audio Format

Supported

| MP3 / WMA / MP2 /

AAC / FLAC / PCM

Video format Supported| AVI / MP4 / MKV / FLV /MOV / RMVB / 3GP / MPEG / H.264

/ XVID

| Ports| HD In x2 / USB Port x1

/ Audio Out x1 / Memory Card Slot x1

Video Format Supported for TF

Card

| MP4 / MKV /MOV (24 FPS, 1280 x 720)| Mounting Screws| 1/4’’

Troubleshooting Guide

1. The content from Hulu, Netflix, and similar services cannot be mirrored or cast.
   • Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast.
2. What should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector?
   • Please prepare a Fire TV stick, Roku stick or Chromecast™ (not included), then connect it to the projector to watch the content.
3. Blurry Image
   • Adjust focus ring/keystone.
   • Projector and screen/wall must be in effective distance.
   • 4. Remote Unresponsive
   • Make sure remote points at IR receiver directly.
   • Do not cover IR receiver.
   • Replace the old AAA batteries with new ones.
4. Upside Down Image
   • Go to Homepage > Settings > Projection Setting > Projection Mode to flip the projection image.
5. Factory Reset
   • Go to Homepage > Settings > System Setting > Restore Factory Default to restore the projector to default settings.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

Importer: Alza.cz a.s.

Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7

CIN: 27082440

Subject of the declaration:
Title: Vankyo Leisure 470 Pro
Model / Type: Leisure 470 Pro

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU

Prague

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• alza.at
• Alza | Alza.co.uk
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>