Vankyo LEISURE470 Projector User Manual

Vankyo LEISURE470 Projector User Manual

Packing List

• LEISURE 470

• Remote (Batteries Not Included)

• Carrying Bag

• AV Cable

• HD Cable

• Power Cable

• User Manual

Notice

Recommended

Not Recommended

Function Overview

Quick Start

1. Plug the power cord into an outlet

2. Take off the lens cover

3. Connect your device to the projector correctly.
   

4. Press the Power Button to turn on the projector.

5. Select the correct input source by pressing the button
   

6. Adjust the kickstand accordingly

7. Adjust the keystone and focus ring to get the best image performance.
   

8. Press the Power Button twice to turn off the projector.
   

Input Source

Press on the projector or remote to enter the interface of input source

A. USB Connection

B. HD Connection

C. VGA Connection

D. Screen Mirroring

Projector Connections

SCREEN MIRRORING

Important: Before screen minoring. please press the .. J button co the projector/remote to enter the interfaze of Input Source and SeleCI Screen Mirroring,

Screen Mirroring through Wireless Connection

For ios System

Streaming with cellular data

1. Turn on the projector. select mirroring as the input source to enter the interface of Screen Mirroring for ios System.
   

2. Go to the settings of your iOS mobile device and connect it to the Win of LEISURE 4701/xxxxxx (pwd:12345678) Please ignore the exclamation mark before it.

3. Activate Screen Mirroring on your  iOS mobile device and search for the projector.
   

4. Select LEISURE 470-XXXXXX from the searching results to connect.

5. The display of your iOS mobile device will be projected to the wall/screen via cellular data after a successful connection

Streaming with your router’s WiFi

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.
   

2. Go to the settings of your iOS mobile device and connect it to the WiFi of LEISURE470-XXXXXX (pwd: 12345678).

3. Visit http://192.168.49.1 from a browser on your mobile device, tap WiFi AP > Scan, select your router’ s WiFi and enter the right password, then tap Connect to continue.
   

4. Your router’s wifi will be displayed on interface of screen mirroring for IOS system after a successful connection.

5. Get back to the WiFi setting of your iOS mobile device, then connect it to the same router’s WiFi.

6. Activate Screen Mirroring on your iOS mobile device and search for the projector, then select LEISURE470-XXXXXX from the searching results to connect.

7. The live streaming content from your iOS mobile device will be projected to the wall/screen through WiFi connection.
   Tip: If you’d like to connect to another router’s WiFi, please repeat the procedures mentioned in the section of Streaming with your router’s WiFi.

For Android System

To activate this function, your android device must support Multi- Screen/Wireless display. Names may differ from different devices.

1. Turn on the projector, select Screen Mirroring as the Input Source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.
   

2. Turn ON the WiFi Switch in your Android device. Successfully connected WiFi on Android device is not a must unless the live streaming content is needed.

3. Activate Multi-Screen function on your Android device and search for the projector.

4. Select LEISURE470-XXXXXX from the searching results to connect.

5. Your Android device display will be projected to the wall/screen after a successful connection.

6. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.

7. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.

8. Some mobile devices may not support screen mirroring due to the compatibility.

Upgrade the Firmware Version of Screen Mirroring

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.
2. Go to the settings of your iOS mobile device and connect it to the WiFi of LEISURE 470-XXXXXX (pwd: 12345678)
3. Visit http://192.168.49.1 from a browser on your mobile device, tap WIFI AP > Scan, select your router’s WIFI and enter the right password, then tap Connect to continue.
4. Tap Settings on the interface, scroll down to the bottom of the page, then tap Upgrade.
5. Tap OK to start upgrading the firmware version of screen mirroring module if it is available.

1. Make sure the projector is connected to WIFI and DO NOT power off during updating.
2. It takes around 6-8 minutes for the update completes, please wait patiently.
3. The projector will automatically reboot once the upgrade is completed.

Tip: After entering the interface of Screen Mirroring for iOS system, you can press and hold the OK button to reset the firmware version of screen mirroring.

Screen Mirroring with the USB Cable

For iOS System

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.

2. Connect your iOS mobile device to the USB port of the projector with the ORIGINAL lightning cable.

3. Select Trust in the pop-up window of Trust This Computer.
   

4. The display of your IOS mobile device will be projected to the wall/screen after a while.

For Android System

1. Turn on the projector, select Screen Mirroring as the input source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.

2. Go to the settings of your mobile device, find Developer options and turn on USB debugging.
   Tip:
   The steps to turn on Developer options vary from different models of Android device. You may check it from Internet or contact us for the detailed steps. We take Samsung Galaxy S8+ as an example.

   • Go to settings of your Android device, then tap About phone > Software information > Build number.
   • Continuously tap on Build number for several times until it shows Developer mode had been turned on.
   • Get back to the settings of your mobile device, it will show Developer options.

3. Connect your Android mobile device to the USB port of the projector with the ORIGINAL USB cable.

4. Tap OK when your Android mobile device pops out the windows of Allow USB debugging?, then your Android device will be projected to the wall/screen.
   

5. The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data, otherwise screen mirroring may fail. You can plug the cable into your laptop to check the availability of transferring the data.

6. Some mobile devices may not support screen mirroring due to the compatibility.

7. Some Android mobile devices may only transfer the display without audio due to the protocol restrictions.

PROJECTION DISTANCE&SIZE

The recommended projection screen is around 90 inches with a projection distance of around 9.84ft. Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

1.35kg (2.981b)
Photo Format Supported| BMP/JPG/PNG/GIF/JPEG| Audio Format Supported| MP3/WMA/MP2/AAC/FLAC/PCM
Video Format Supported| AVI/MP4/MKV/FLV/MOV/ RMVB/3GP/MPEG/H.264/ XVID| Ports| HD In x 2/USB Port x 1/Audio Out x 1/AV In x 1/VGA Port x 1/Memory Card Slot x
Mounting Screws|  M4 Metric| Screw Number| 3

TROUBLESHOOTING GUIDE

1. Blurry Image
   • Adjust focus ring/keystone.
   • Projector and screen/wall must be in effective distance.
2. Remote Unresponsive
   • Make sure remote points at IR receiver directly.
   • Do not cover IR receiver.
   • Try a new pair of AAA batteries.
3. Mobile Connection
   • iOS: ORIGINAL Lightning cable or Lightning to HDMI cable.
   • Android: ORIGINAL USB cable or micro USB/Type C to HDMI cable.
4. Upside Down Images
   • Go to Menu > PICTURE > Projection Direction to flip the projection image.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.The minimum distance from body to use the device is 20cm.

CAUTION

The symbol indicates AC voltage

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. This product can be used across EU member states.

VANKYO SUPPORT

North America [email protected]
United Kingdom [email protected]
Deutschland [email protected]
France [email protected]
Italia [email protected]
Espana [email protected]
Japan [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>