VANKYO LEISURE 470 NEO Portable HD Projector User Manual

VANKYO LEISURE 470 NEO Portable HD Projector

TROUBLESHOOTING GUIDE

1. The copyrighted contents from Hulu, Netflix, and similar services can not be mirrored or cast.

• Due to the copyright restriction from H ulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast. To play copyrighted content, please prepare a laptop, Fire TV Stick, Roku stick, or Chromecast™ and connect it to the projector. 2. Blurry image
  1. Adjust the focus/keystone.
  2. The projector and screen/wall must be in the effective distance.
  3. Why doesn’t the remote control work?
  4. Make sure the remote points at the IR receiver directly.
  5. Please make sure you have installed two AAA batteries in the remote control.
  6. Avoid mixing new batteries with old ones in the remote control as this can result in insufficient power supply and operational issues.
  7. Upside down images
  8. *Go to Homepage> Settings> Option> Flip to flip the projection image.
  9. Factory reset
  10. Go to Homepage> Settings> Option> Factory Reset to restore the projector to default settings.

IN THE BOX

NOTICE

PRODUCT OVERVIEW

QUICK START

Projector Installation

Note:
Whichever installation option you select, please make sure:

• To go to Homepage> Settings> Option> Flip to select the corresponding projection mode, so the images can be projected correctly_
• Mounting Screw:7/4″ (not included)

Power On/Off

1. Take off the lens cover_
2. Connect the power adapter to an outlet_
3. Press the Power button  once to turn on the projector_
4. Press the Power button twice to turn off the  projector_

Image Adjustment

1. Press the focus buttons on the remote or go to Homepage> Settings> Adjust> Focus to sharpen  the image focus until the blurry image becomes clear.
2. Go to Homepage> Settings> Adjust> Keystone to manually correct the distortion.
3. Goto Homepage> Settings> Option> Digital Zoom to reduce or enlarge the image size.

PROJECTOR CONNECTION AND INPUT SOURCE

Connect your device to the projector correctly, then select the right input source.

1. USB Connection
2. HD Connection
3. AV Connection
4. Wired Speaker and Headphones Connection

WIFI CONNECTION
You can connect your projector to your router’s WiFi by going to Homepage> Wi- Fi.

SCREEN MIRRORING

For iOS System
Screen Mirroring Wirelessly

1. Step 1:
   Connect the projector and your mobile device to the same router’s WiFi or directly connect your mobile device to the projector’s AP hotspot.
   Tip: When you are using the projector’s AP hotspot, the contents will be mirrored via the cellular data. __

2. Step 2:
   Go to Homepage> Wireless and select iOS Device to enter the interface below.

3. Step 3:
   Go to the Control Center of your iOS device, then tap Screen Mirroring/Air Playing to search for the projector.

4. Step 4:
   Choose Vankyo-XXXXXX from the list, and once the connection is successful, the contents on your iOS device will be mirrored onto the projection screen or wall.

Screen Mirroring via a Lightning Cable

1. Step 1:
   Go to Homepage> Wired to enter the interface below.

2. Step 2:
   Connect your mobile device to the USB Port on the projector using the ORIGINAL lightning cable.

3. Step 3:
   Select Trust in the pop-up window of Trust This Computer?

4. Step 4:
   The contents on your iOS device will be mirrored on the projection screen/wall after a successful connection.

For Android System
To activate this function, please make sure your Android device supports Multi-screen/Smart View/ Wireless Display. Names vary on different Android devices.

1. Step 1:
   Go to the WiFi setting of your Android device to switch on the option of WiFi.
   Note:
   It is not necessary to have a successful WiFi connection, but it is important to ensure that the WiFi is turned on in your Android device

2. Step 2:
   Go to Homepage> Wireless and select Android Device to enter the interface below.

3. Step 3:
   Activate the Multi-screen/Smart View/Wireless Display function on your Android device and search for the projector.

4. Step 4:
   Choose Vankyo-XXXXXX from the list, and once the connection is successful, the contents on your Android device will be mirrored onto the projection screen or wall.

BLUETOOTH CONNECTION

1. Use as A Bluetooth Speaker
   It is possible to use this projector as a Bluetooth speaker by connecting your mobile device to it through a Bluetooth connection.

2. Step 1:
   Go to Homepage> Settings> BT Device and press the OK button to switch BT mode to Receiver.

3. Step 2:
   Access your mobile device’s Bluetooth settings and activate Bluetooth. Search for Vankyo in the available devices list to pair your mobile device with the projector.

4. Connect to An External Bluetooth Speaker
   In addition to using the wired 3.5mm audio output port, you can also connect Bluetooth speakers or Bluetooth Headphones to this projector via a Bluetooth connection.

5. Step 1:
   Turn on your Bluetooth device and make it ready for a Bluetooth connection.

6. Step 2:
   Go to Homepage> Settings> BT Device and press the OK button to switch BT mode to On. Scan available Bluetooth devices, then select your Bluetooth device and pair it with the projector.

IMPORTANT :

1. Compared with the wired connection to a speaker, BT wireless connection spends more time processing digital audio data, converting said data to an audio signal, and streaming the signal. There may be a delay or slight lag on audio due to signal interference.
   • As a result, the sound on the speaker may not be in sync with the image on the projector, especially when you are using wireless screen mirroring with WiFi and BT wireless connection at the same time.
   • If you are experiencing this situation, please check the following options to improve audio quality:
   • Instead of using wireless screen mirroring with WiFi and BT wireless connection at the same time, we recommend using wired screen mirroring and BT connection or using HD connection via the provided HD cable and BT connection simultaneously. If you still want to use wireless screen mirroring, it is recommended to output the audio via a wired speaker.
   • Move your BT device closer to the projector.
   • Keep the projector and your BT device away from other BT devices to avoid interference.
   • You may be able to adjust the latency (Lip Sync) on your device which is playing the video. The way to adjust the latency varies with different devices; please consult it from the device manufacturer.
2. Due to the compatibility issue between BT speakers/headphones and the projector, few BT devices may not be paired with the projector via BT wireless connection. Please contact us at [email protected] for further assistance.

SETTINGS

Option

1. Set the projector’s language.
2. Select the appropriate projection mode to ensure accurate image projection.
3. Restore the projector to the factory settings.
4. Update the software as needed.
5. Set the screen to automatically turn off after a specific period.
6. Set the menu display time before it automatically returns to the homepage.
7. Modify the image size and change the aspect ratio.
8. Check version info

Picture
Select your preferred image mode and color temperature. When selecting User in the Image Mode option, you can tweak Contrast, Brightness, Color, and Sharpness settings to optimize the image quality.

Sound
Select your preferred sound mode and adjust the balance settings. When selecting User in the Sound Mode option, you can tweak Treble and Bass to adjust the sound effect.

BT Device

1. Connect the projector to an external Bluetooth speaker.
2. Connect the mobile device to the projector to use the projector as a Bluetooth speaker.

Adjust

1. Correct the keystone manually.
2. Adjust the focus manually.

PROJECTION DISTANCE AND SIZE

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector as needed.
• Ambient darkness will improve the clarity of the projected images.

Specifications

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 75 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation of 5750-5250 MHz is restricted to indoor use only.

CAUTION

• To avoid replacement of a battery with an incorrect type.
• Don’t disposal of a battery into fire or a hot oven, or mechanically crush or cut of a Battery.
• Don’t leave a battery in an extremely high temperature surrounding environment.
• To avoid battery subjected to extremely low air pressure.
• The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

VANKYO SUPPORT

[email protected]

www.ivankyo.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>