VANKYO Leisure 470 Pro Projector User Manual
- June 5, 2024
- VANKYO
Table of Contents
VANKYO Leisure 470 Pro Projector
WHAT’S INCLUDED
Projector
Remote Batteries Not Included
User Manual
HD Cable
Power Cable
Carrying Bag
NOTICE
Recommended
NOT Recommended
PRODUCT OVERVIEW
QUICK START
Plug the power cord into an outlet.
Take off the lens cover.
Press the Power Button to turn on the projector.
Select the correct input source by pressing the button 0 /-El .
Connect your device to the projector correctly.
Adjust the kickstand accordingly.
Adjust the keystone and focus ring to get the best image performance.
Press the Power Button twice to turn off the projector.
PROJECTOR CONNECTION AND INPUT SOURCE
Connect your device to the projector correctly, then select the right input source on the homepage.
USB Connection
TF Card Connection
HD Connection
This option is for connecting a device with an HDMI output port.
AV Connection
WIFI CONNECTION
Go to Homepage> Settings> Network Setting to connect the projector to your router’s WiFi.
SCREEN MIRRORING
For iOS System
Screen Mirroring Wirelessly
Step 1
Connect the projector and your mobile device to the same router’s WiFi or
directly connect your mobile device to the projector’s AP hotspot.
Tip
When you are using the projector’s AP hotspot, the content will be mirrored
via the cellular data.
Step 2
Go to Homepage and select iOS Cast to enter the interface below.
Step 3
Activate Screen Mirroring/AirPlaying Mirroring in the Control Center of
your iOS device and search for the projector.
Step 4
Select NETLINK-(icast) from the searching list. The contents on your iOS
device will be mirrored on the projection screen/wall after a successful
connection.
Screen Mirroring via A Lightning Cable
Step 1
Go to Homepage and select iOS Cable to enter the interface below
Step 2
Connect your mobile device to the USB Port on the projector using the ORIGINAL
lightning cable.
Step 3
Select Trust in the pop-up window of Trust This Computer?
Step 4
The contents on your iOS device will be mirrored on the projection screen/wall
after a successful connection.
For Android System
To activate this function, please make sure your Android device supports Multi-screen/Smart View/Wireless Display. Names may vary on different Android devices.
Step 1
Go to the WiFi settings of your Android mobile device to switch on the option
ofWiFi..
Note
Successful WiFi connection is not a must, but please make sure the WiFi
switch on your Android device is ON.
Step 2
Go to Homepage and select Miracast to enter the interface below
Step 3
Activate the Multi-screen/Smart View/Wireless Display function on your Android
device and search for the projector.
Step 4
Select NETLINK-(icast) from the searching list. The contents on your Android
device will be mirrored on the projection screen/wall after a successful
connection.
SETTINGS
Press the Menu button on any interface to check the PICTURE, SOUND and OPTION settings.
PICTURE
SOUND OPTION
- After you select User in the option of Picture Mode, you can change the settings of the Contrast, Brightness, Color, Tint and Sharpness to adjust the image quality. support@ivankyo.com you select.
- User in the option of SOUND you could change the settings of the Treble and Bass to adjust the sound efect.
- When you are using the USB connection or HD connection on the projector, the option ot Aspect Ratio will be activated.
- You can then adjust the aspect ratio of the projection image.
- Go to Homepage> Settings to connect the projector to a WiFi network, change language, restore the projector to factory settings, change the projection mode and adjust the image size.
PROJECTION DISTANCE & SIZE
The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed. Ambient darkness will improve the clarity of the projected images.
SPECIFICATION
| Display Technology | LCD | Light Source | LED |
|---|
Resolution
| ****
Native 1920 x 1080
| ****
Input Signal
| ****
576i/720P/1080i/1080P
TROUBLESHOOTING GUIDE
- The content from Hulu, Netflix, and similar services can not be mirrored or cast. Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast.
- What should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector? Please prepare a Fire TV stick, Roku stick or Chromecast™ (not included), then connect it to the projector to watch the content.
- Blurry Image
- Adjust focus ring/keystone.
- Projector and screen/wall must be in effective distance.
- Remote Unresponsive
- Make sure remote points at IR receiver directly.
- Do not cover IR receiver.
- Replace the old AAA batteries with new ones.
- Upside Down Images
- Goto Homepage> Settings> Projection Setting> Projection Mode to flip the projection image.
- Factory Reset
- Goto Homepage> Settings> System Setting> Restore Factory Default to restore the projector to default settings.
- TF cards only support a few video formats
- TF card has limited decoding ability, so it only supports video formats of MP4, MKV, and MOV. For the frame rate of a video, it supports 24FPS and for the resolution, it supportsl280X720. If there is any unsupported video, it is recommended to use a U disk through the USB connection or use a computer through the HD connection.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correctthe interference by one or rnore
of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISEDC Warning
This device corn plies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions
- This device rnay not cause interference, and
- This device rnust accept any interference, including interference that rnay cause undesired operation of the device.
- The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.
- The minimum distance from body to use the device is 20cm.
- Operation of this device in the band 5150-5250 MHz is restricted to indoor use only.
VANKYO SUPPORT
- North America support@ivankyo.com
- United Kingdom support.uk@ivankyo.com
VankyoOfficial
VANKYO
Documents / Resources
|
VANKYO Leisure 470 Pro
Projector
[pdf] User Manual
Leisure 470 Pro, Projector, Leisure 470 Pro Projector
---|---
|
VANKYO Leisure 470 Pro
Projector
[pdf] User Manual
VT01, 2AQ3A-VT01, 2AQ3AVT01, Leisure 470 Pro Projector, Leisure 470 Pro,
Projector