VANKYO LEISURE E30T Native Gaming Projector User Manual

VANKYO LEISURE E30T Native Gaming Projector

WHAT’S INCLUDED

NOTICE

Recommended

NOT Recommended

PRODUCT OVERVIEW

QUICK START

• Plug the power cord into an outlet.
• Take off the lens cover.
• Connect your device to the projector correctly.
• Press the Power Button to turn on the projector.
• Select the correct input source to project your device
• Adjust the kickstand accordingly.
• Adjust the focus ring on the projector and correct keystone distortion in Projection Image Settings to get the best image performance.
• Press the Power Button twice to turn off the projector.

HOMEPAGE

KEYSTONE CORRECTION

Step 1: Selection the Homepage to enter the interface of Settings, then select Projection Images Setting to enter the interface of Projection. Or, press on the remote to directly enter the interface of Projection.

Step 2

• Select Front in the option of Keystone Advanced and the Manual Keystone option will be displayed.
• You can correct the Vertical keystone distortion manually until the shape is evenly rectangular.
• Select Side in the option of Keystone Advanced and the 4-Point Keystone option will be displayed. You can correct the image shape by four corners.

MULTIMEDIA CONNECTION

USB Disk/Memory Card Connection

• Step 1: Turn on the projector and insert your USB disk/memory card into the USB port/memory card slot.
• Step 2: Go to Homepage and select the file category you would Iike to display among Movie, Music, Photo, and Office Suite, then enter the inserted USB disk/memory card to check all files stored.

Video files

• Select Movie to correspondingly read video files stored.
• Tap OK on the projector/Press OK on the remote for a certain video file to enter the full-screen display.
• 3 Tap OK/ on the projector or press OK/ on the remote when playing a video to bring up the toolbar to control the video playing.
• Video Format Supported: Avi/MP4/MKV/FLV/MOV/RMVB/3G2/MPG/VOB/SWF/MPG/H.264/TS/WMV

Audio files

• Select Music to correspondingly read audio files stored.
• Tap on the projector/Press OK on the remote for a certain audio file to enter full-screen display, then press u on the remote to start/pause playing.
• Audio Format Supported: AAC/MP3/FLAC/OGG/APE/AMR/WAV/MP2

Photo files

• Select Photo to correspondingly read photo files stored.
• Tap OK on the projector/Press OK on the remote for a certain photo file to enter the full-screen display.
• Image Format Supported: JPEG/BMP/PNG

Document files

• Select Office Suite to correspondingly read document files stored.
• Tap OK on the projector/Press OK on the remote to view the contents of a certain file
• Tap on the projector or press on the remote to jump the cursor to the toolbar at the top.
• Text Format Supported: DOC/DOCx/XLS/XLSX/PPT/PPTX/TXT

Step 3: ap on the projector or press on the remote to go Dack to Homepage.

HD Connection

Step 1: Tun on the projector and connect your device to the HD 1/HD 2 Port of the projector with the provided HD cable.

Tip

• For Windows 7 or higher systems, press the “Windows Logo + P” key combination to access four display modes.
• PC screen only option displays contents on a computer screen only.
• The duplicate option displays the same contents on both the computer screen and the projected screen.
• Extend option splits the display between the computer screen and the projected screen.
• The second screen-only option displays contents only on the projected screen.

AV Connection

• Step 1: Turn on the projector and connect your device to the AV port of the projector with an AV cable.
• Step 2: Select Av on the left side of the Homepage as the input source, then the contents of your device will be projected to the screen/wall.

SCREEN MIRRORING

For iOS System

• Step 1: Select on the upper right corner of the Homepage, then enter Settings intertace and select Wifi Setting
• Step 2: Turn on the WiFi switch of the projector and connect the projector to your router’s WiFi.
• Step 3: Enter WiFi settings of your iOS device and connect it to the same router’s WiFi.
• Step 4: Go to Homepage > i0S Cast to enter the following interface.
• Step 5: Activate Screen Mirroring/AirPlay Mirroring on your i0S device and search for the projector.
• Step 6: Select Leisure XXXX from the searching list to connect.
• Step 7: Ihe contents on your ioS device Will De mirrored to the wall/screen.

For Android System

To activate this function, please make sure your Android device supports Multi-screen/Wireless display. Names may differ from one Android device to another

• Step 1: Turn ON the WiFi switch in your Android device.

Note: Successful WiFi connection is not a must, but please make sure the WiFi switch in your Android device is ON.

• Step 2: Go to Homepage > Miracast to enter the following interface.
• Step 3: Activate the Multi-Screen function on your Android device and search for the projector.
• Step 4: Select Leisure XXXX from the searching list to connect.
• Step 5: The contents on your Android device will be mirrored to the wall/screen.

Note

• The fluency of screen mirroring will be affected by the network environment. A bandwidth of 10OMbit or more is recommended when using screen mirroring
• Make sure your mobile device is close to the projector when using a wireless connection. A distance within 3ft is recommended.
• Some mobile devices may not support screen mirroring due to compatibility.

SETTINGS

Select the upper right corner of the Homepage to enter the Settings interface.

PROJECTION DISTANCE&SIZE

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
• Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

TROUBLESHOOTING GUIDE

The content from Hulu, Netflix, and similar services can not be mirrored or cast

• Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or Cast.

What should I do if l want to watch the content from Hulu, Netflix, and similar services via the projector?

• Please prepare a Fire TV stick, Roku stick, or Chromecast (not included), then connect it to the projector to watch the content.

Blurry Image

• Adjust focus ring/keystone Projector and screen/wall must be an effective distance.

Remote Unresponsive

• Make sure remote points at IR receiver directly.
• Do not cover the IR receiver.
• Try a new pair ot AAA batteries.

Upside Down Images

• Go to Homepage> Projection Image Setting > Projection Mode to flip the projection image.

Factory Reset

• Go to homepage >System Update > Restore Factory to reset the projector to default settings.

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interterence.
2. this device must accept any interterence received, including interterence that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exp0Sure limits set forth for an uncontrolled environnment, This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference.
2. this device must accept any interference, including interference that may cause undesired operation of the device.

VANKO SUPPORT

• North America: support@ivankyo.com
• United Kingdom: support.uk@ivankyo.com

• www.ivankyo.com
• @Vankyoofficial
• VANKYO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>