Electrolux Dryer Wall Mounting Instructions
- June 7, 2024
- Electrolux
Table of Contents
Electrolux Dryer Wall Mounting Instructions
INSTRUCTIONS FOR WALL MOUNTING YOUR DRYER
The wall or vertical surface must be strong enough to support the weight of
the fully loaded dryer approximately 45kg.
If the dryer will be above a top loading washing machine, leave sufficient
space below the dryer for the washer lid to open.
Push the slotted tabs right in on the back panel nearest your choice of the top (can be mounted either way), using the brackets or a flat type of screwdriver.
Existing Hoover, Westinghouse or Simpson Brackets
Remove the old brackets and replace with the new bracket, using the
appropriate holes to refasten the new brackets. For Electrolux, Westinghouse
and Simpson models please use the 8mm diameter holes.
New Bracket Installation
Use the dimensions below to mark the correct location of the holes to be
drilled, ensuring the distance between the brackets and the holes are all
correctly aligned.
Brick or Solid Construction Walls
Use the top holes (6.5mm diameter) to mount the bracket. Bolt the brackets
directly to the wall using suitable self locking masonry fasteners, 6mm in
diameter x 30mm long.
Timber Framed Walls
Brackets must be positioned so that they attach to the wall studs behind the
plaster board or wall sheeting. If it is not possible to screw the brackets
directly into the wall studs because they are at an inconvenient height or
spacing, a timber batten (90mm x 35mm) which will span the distance between
the two vertical studs is needed. Fasten the batten to the wall studs using
four coach screws (6mm diameter x 70mm long). The wall brackets can then be
screwed to the batten using the top two holes on each side with four coach
screws (6mm diameter x 30mm long).
If mounting the dryer on a batten, you will need to mount another piece of timber approximately 600mm long near the bottom of the dryer, in line with the two wall spacers. This will keep the dryer vertical.
Insert the spacers at the bottom of the dryer. Push them into the key-hole slots, then rotate the spacers quarter turn to lock. (Push tabs right in)
Note: the dryer can be mounted either way for your convenience.
It is advisable to have a second person to assist when hanging the dryer.
IMPORTANT INFORMATION
These instructions should be read in conjunction with the user manual.
Adherence to the directions for use in the user manual is extremely important
for health and safety. Failure to strictly adhere to the requirements in the
user manual may result in personal injury, property damage and affect your
ability to make a claim under the manufacturer’s warranty provided with your
product. Products must be used, installed and operated in accordance with the
user manual.
© 2019 Electrolux Home Products Pty Ltd.
EINS_WMDryer_May19
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>