ULINE 3-in-1 Aluminum Hand Truck with Solid Rubber Wheels Instructions
- June 7, 2024
- ULINE
Table of Contents
H-4124
3-IN-1 ALUMINUM HAND TRUCK
WITH SOLID RUBBER WHEELS
TOOLS NEEDED
PARTS
| REF. | QTY. | DESCRIPTION |
|---|---|---|
| 1 | 1 | Handle |
| 2 | 2 | 6mm Bolt |
| 3 | 2 | 6mm Locknut |
| 4 | 1 | Frame |
| 5 | 2 | Cotter Pin |
| 6 | 8 | Washer |
| 7 | 2 | Wheel |
| 8 | 1 | Axle |
| 9 | 2 | Round Pin |
| 10 | 4 | 8mm Bolt |
| 11 | 2 | Axle Support |
| 12 | 2 | Frame Reinforcement |
| 13 | 4 | 8mm Locknut |
| 14 | 1 | Nose Plate |
| 15 | 1 | Folding Nose Extension |
ASSEMBLY
NOTE: Do not use air or power tools.
ATTACH HANDLE
- Slide handle onto the top rails of the frame. Align holes in handle and frame. Insert two 6mm bolts through handle and frame and secure with locknuts. (See Figure 1)
ATTACH NOSE PLATE, FOLDING NOSE EXTENSION AND AXLE SUPPORTS
-
Position frame reinforcements against bottom frame rail. (See Figure 2a) Slide nose plate into channel on frame reinforcements, keeping bolt holes aligned. (See Figure 2)
-
Align axle support with outside rail of frame. (See Figure 2)
-
Insert four 8mm bolts through the axle supports, frame, frame reinforcements and nose plate. (See Figure 2)
-
Slide the folding nose extension bracket over the 8mm bolts protruding from the bolt holes on the inside of the nose plate. (See Figure 3a)
NOTE: The bolt holes on the bracket are NOT centered. Make sure the bolt
holes are closest to the back of truck before tightening. (See Figure 3) -
Secure with locknuts but DO NOT tighten. (See Figure 3)
ATTACH AXLE AND WHEELS
-
Lay hand truck down on front so axle supports face upwards. (See Figure 4)
-
Insert axle through holes in axle supports. Align holes in axle with grooves on inside of the axle supports. Use a hammer to tap in the round pins. (See Figure 4a)
-
Slide 3 washers onto each end of the axle. Slide a wheel onto each end of the axle. Slide another washer onto each end of the axle. (See Figure 5)
-
Insert a cotter pin through the holes in each end of the axle. Bend cotter pins using pliers to secure wheel. Wheels should spin freely. (See Figure 5)
-
Tighten all locknuts.
1-800-295-5510
uline.com
0421 IH-4124
References
- Uline.ca - Shipping Boxes, Shipping Supplies, Packaging Materials, Packing Supplies
- Uline.mx - Cajas para Envíos, Materiales de Empaque, Materiales de Empaque, Suministros para Empaque