Pyle Hybrid Amplifier Receiver User Manual

: June 7, 2024
: Pyle

Table of Contents

FEATURES
PRECAUTIONS
OPERATION
CONTROLS & FUNCTIONS
REMOTE CONTROL
SAFETY INSTRUCTIONS
Features:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pyle Hybrid Amplifier Receiver - Cover

PT272AUBT
Hybrid Amplifier Receiver
Home Theater-Stereo System, Wireless BT Streaming, MP3/USB/SD Readers, AM/FM Radio, 300 Watt

Please read these operating instructions carefully before use. They will acquaint you fully with its features.
This product adopts highly advanced digital techniques, high powered, four- channel outputs to be the media center of your living room. It includes an AM/FM tuner, MP3/Wireless BT input headphone jack. This Pyle Pro hybrid amplifier also has sub-out and pre-outs for a variety of applications.

CAUTION:
RISK OF ELECTRIC SHOCK NO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DON’T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

THIS DEVISE IS INTENDED FOR CONTINUOUS OPERATION!
*Designs and specifications are subject to change without notice.

FEATURES

PRE-Amp with AM/FM Tuner
CPU management of all functions, remote sensor
Digital fluorescent output displays all the functions
Separate gain control of pre-amp and subwoofer
All the blue lights and blue rings gain control through LED Dimmer
AM/FM Quartz synthesized Tuner, auto station seek and store, 50 stations storage, with both manuaI and automatic tuning
BT/MP3 Input
Digital karaoke system
Over heat, over current protection
Wireless BT receiver features that make listening to music more convenient

Before you can use a Wireless BT device, it must be paired and connected. Make sure that Wireless BT is activated on your device before you begin the pairing process.
If a username and password is required, search for Wireless BT Network Name: Pyle Speaker and enter the necessary login “0000”

PRECAUTIONS

Power Source: The unit should be connected to a power supply AC-110/60Hz, AC-220V/50Hz.
Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventilation. Place the unit at least 10cm away from the walls.
Water and moisture: The unit should not be used near water-for example, near a swimming pool, in a wet basement, etc.
Electric Shock: If a metal objects, such as a hair pin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result. For families with children, never permit children to put anything, especially metal, inside this unit.
Enclosure Removal: Do not open the unit as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.
Abnormal Smell: If an abnormal smell or smoke is detected, immediately turn the power OFF and pullout the power cord. Contact your dealer or nearest service station.

How to replace the preset radio stations?
Use the remote control to set the radio stations.

NOTE: The preset radio stations can’t be deleted, BUT CAN BE REPLACED.

Operations Steps:

Press TUNER MODE on the remote control
Pres AM/FM , and select FM
Press PRE/NEXT to select the stations you don’t want to keep;
Press TUNING again choose the radio stations you want to save
Press MEMORY to save the new stations In this way, you can replace the preset radio stations.

OPERATION

POWER
Use this button to turn ON or OFF the speakers.
Caution: Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit.
INPUT SELECT
Select the input source: CD/DVD, USB, Radio, Wireless BT Streaming
MICROPHONE VOLUME: MIC VOL
Adujst “MIC VOL” knob to increase or decrease the karaoke volume
ECHO
Adjust “ECHO” to get a satiable echo effect.
TREBLE/BASS
Turn TREBLE/BASS knob to adjust treble/bass tone master channel.
MASTER VOLUME
You can adjust MASTER VOLUME from turn right volume up , turn left volume down.

CONTROLS & FUNCTIONS

FRONT PANEL

1. POWER SWITCH
Press to power unit N/OFF| 9. AUTOSCAN
Auto search for radio station| 18. BASS
---|---|---
2. SD/MMC CARD READER| 11. AM/FM SELECTOR| 19. ECHO
3. USB READER| 12. MUTE| 20. MIC. TREBLE
4. PLAY/PAUSE| 13. A/B SPEAKERS OUTPUT SELECTOR| 21. MIC. BASS
5. PREV
Used to select the Previous station which have been kept in system| 14. INPUT SELECTOR| 22. MIC. VOL
6. NEXT
Used to select the next station which have been kept in system| 15. VOLUME CONTROL| 23. MIC 2 INPUT
7. TUNING <| 16. SUB.VOL CONTROL| 24. MIC 1 INPUT
8. TUNING >| 17. TREBLE|

BACK PANEL

TUNER ANT:
Connect for AM and FM antennas.
AUDIO INPUT JACKS:
Connect the audio ouput jacks of DVD/CD AUX to these jacks.
A SPEAKER OUTPUT TERMINALS:
Connect your speaker system to these terminals.
B SPEAKER OUTPUT TERMINALS:
Connect other speaker system(s) to these terminals.
COOLING FAN
VOLTAGE SELECTOR SWITCH:
Slide to select correct voltage 110V or 220V.
POWER CORD:
Connect to AC 110V/60Hz and 220V/50Hz outlet.

REMOTE CONTROL

Pyle Hybrid Amplifier Receiver - Remote Control

AUX/USB Selector
CD/DVD Selector
TUNER Selector
AUTO: Automatically search the single source when power ON
MP3/BT Selector
AUTOSCAN: AM/FM auto scan selector scan and store stations automatically. Can store 50 stations
MEMORY:
After a station has been found you can store the station by pressing the MEMORY botton and the screen will display SAVE.
ST/MONO: Stereo and mono selector.
SPEAKER A selector
SPEAKER B selector
FM/PAUSE selector
AM/PLAY selector
NEXT > PREV<
Next station & Previous selector
TUNING > TUNING<
Adjust the strong signal of the stations
A+B SPEAKER selector
L/R
Left/Right balance control
VOL- VOL+ Master volume increase and decrease
MUTE selector

Remote Controller 0peration

Remote controller should be operated within 6 meter and the scope of 30° in front of receiver.
Make sure that there is no big obstacle between remote controller and machine.
Remote sensor should be far away from the light, high amounts of light can affect its performance.

Pyle Hybrid Amplifier Receiver - Remote Controller
Operation

SAFETY INSTRUCTIONS

Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit.
When more than one pair of speakers are used, (specially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise the unit maybe damaged under high power or long term operation.
To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted.
For speaker cords, strip off the vinyl coating and twist the wire tip. Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause short circuit when wires of different terminal contact each other.
After the unit is turned ON, adjust the main volume to the desired level same with bass and treble volume, etc.

PT272AUBT
Hybrid Amplifier Receiver
Home Theater Stereo System, Wireless BT Streaming,
MP3/USB/SD Readers, AM/FM Radio, 300 Watt

Features:

Home Theater Amplifier Receiver System
Ability to Connect External Devices & Speakers
Built-in BT for Wireless Music Streaming
MP3 Digital Audio File Support
USB Flash & SD Memory Card Readers
AM/FM Radio with LCD Display
(2) 1/4” Microphone Inputs
RCA (L/R) Audio Input/Output
Banana Binding Post Speaker Output Jacks
Front Panel Button Control Center
Echo, Bass, Treble, Sub, Mic Volume Adjustable
Includes Remote Control & Power Cable

Wireless BT Connectivity:

Instantly Receives Wireless Music Streaming
Works with all of Your Favorite Devices
(iPhone, Android, Smartphone, iPad, Tablet, etc.)
Wireless BT Version: 3.0
Wireless BT Network Name: Pyle Speaker
Wireless BT Password Required: `0000′ (4 Zeroes)

Technical Specs: