SOUNDPEATS T2 Earbuds User Manual

SOUNDPEATS T2 Earbuds User Manual

MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited

Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
support@soundpeatsaudio.com
www.soundpeatsaudio.com

Package Content

Specifications

Product Diagram

Controls

Wearing

1. Identify the left and right earbuds.
2. Rotate the earbuds, and adjust to find the best angle.

Pair

1. When the charging case Is powered, open the charging case, then both earbuds will enter pairing mode automatically. You will see the indicators flashes in blue and white.
2. Activate Bluetooth on the device, and choose “SOUNDPEATS T2” on Bluetooth list to pair.

Pairing and Re-Pairing

1. When the charging case is powered, open the charging case, then both earbuds will enter TWS pairing mode automatically. You will hear a voice prompt when the left and right earbuds connect to each other successfully. After this, the indicator for secondary earbud stays on and indicator for main earbud flashes in blue and white alternately with a voice prompt “Pairing” indicating the earbuds enter pairing mode.
2. “SOUNDPEATS T2”will show up on the Bluetooth list, click it to connect. You will hear a voice prompts “connected” when the earbuds connect with your device successfully.
3. SOUNDPEATS T2 Bluetooth earbuds can remember previously paired Charging the headset devices. When you make The second connection, simply activate the Bluetooth in your device, take out the both earbuds From the charging case. They will connect to each other, and reconnect to your device automatically. If the earbud doesn’t automatically connect to your device, please activate the Bluetooth in your device and hit “SOUNDPEATS T2” on the Bluetooth list.
4. Mono Mode: After successfully pairing of SOUNDPEATS T2 , the left and right earbud can be Used separately.

Factory Reset

(Try the following steps if you fail building connection between two earbuds,or between Earphones and device)

1. Clear pairing record between the earbuds and all your devices.
2. Place back both earbuds into the charging docks and make sure the earbuds are charging properly. Then click the multi function buttons of both earbuds 5 times until the LED light of the both earbuds flash blue and white twice indicating reset successfully.

Charge

SOUNDPEATS T2 Bluetooth earphones are equipped with a charging case which can not only Charge the earphones, but also a case that is convenient to carry and store the earphones.

Built-in rechargeable battery, can charge two earphones Twice.

Charging the headset

The earphones are partially charged at the factory. Please make sure they are fully charged Before first use.

1. Put the earphones into corresponding charging docks and make sure the connectors for Charging are connected properly.
2. The LED indicator lights up in blue indicating that the earphones start to charging.

Charge the case

When using the charging case to charge and it didn’t indicate in blue, please charge the case soon.

1. Connect the charging port with Type-C charging adapter.(Please make sure the current is not Greater than 1A) the indicator ashes in white. When the charging case charge until fully status, the LED indicator light will normal on aer fully charged.
2. Please charge the case at least once every 3months when not in use for a long time.

Warranty and Support

We warrant this device 12 MONTHS from date of the original purchase for manufacturer
defects.

support@soundpeatsaudio.com
www.soundpeatsaudio.com

For more details. Please scan the QR code to check the detailed PDF manually

https://soundpeatsaudio.com/downloads/

Qualcomm

Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm
Technologies, Inc. and/or its subsidiaries.

Qualcomm and Qualcomm True Wireless are trademarks of Qualcomm Incorporated, registered
in the United States and other countries.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

Q & A

Q 1: What do the charging LEDs tell while charging the case?
When the left earbud is placed into the charging case, the first LED indicator flashes, which means the left earbud in charging status.
When the right earbud is placed into the charging case, the third LED indicator flashes, which means the right earbud in charging status.
When both of the earbuds ore placed Into the charging case, the first and third LED Indicators flashing, which means both earbuds In charging status consistently.

Q 2: When charging for the charging case, what’s the LED lights indicate ?

When the battery level of the charging case Is 0%-19%. The first LED at the bottom fleshes In white

When the battery level of the charging case is 20%-69%, The first LED at the bottom lights up in white And the second LED flashes in white

When the battery level of the charging case is 7r:J%-99%, The second LED at the bottom light up In white And the third LED flashes In white

When the battery level of the charging case Is 100%. All three LEDs at the bottom light up In white

Q 3: What shall I da to charge for the charging case ?

1. Connect the charging port with Type-C charging adapter.(Please make sure the current Is not Greater than 1 A) If the LED Indicators flash, which means a charging status.
2. Please charge the case at least once every 3months when not in use for a long time.

Q 4: Why are the earbuds still connected to my phone after placing back?

1. The charging case Is out of battery. The case will not turn off the earbuds if the case battery dead.
2. Please make sure the earbuds are placed properly In the charging case. And wipe the charging metal sheet and pin needle with a microfiber cloth to keep charging connectors on both the earbuds and charging case clean.

Q 5: Why the battery life Is not as advertised?

A single charge of the earbuds will not give you 30 hours playtime constantly. The earbuds work around 10 hours per charge with average use. The charging case provides another 2 recharges.

FAQ

BLUETOOTH

How to reset SoundPEATS T2?

1. Clear pairing records between SOUNDPEATS T2 and all your devices
2. Take both earbuds out of the charging case and press the multifunction buttons of both earbuds for 10s to turn them off
3. Long press the multifunction buttons of both earbuds for 10s until the LED lights of both earbuds flash white 5 times

Why is the Bluetooth connection unstable sometimes?

1. Though Bluetooth is also a kind of wireless signal transmission, it’s not as strong as WiFi. It compromises by a lot of interference around, such as the compatibility between the connected devices, some other wireless signal around, WiFi frequency, and the barriers between (walls, doors, etc.). Bluetooth range is normally around 30 feet in open space. The actual performance replies on the environment.
2. Please charge the earbuds. A low battery may cause disconnection.
3. Please clear the pairing record and restart your device.

What can I do if the earbuds stopped connecting to my device?

1. Clear the pairing record between the earbuds and all of the previous devices.
2. Try to clear some Bluetooth listings on your device and restart the device.
3. Put the earbuds into the charging case to reset.
4. Take the earbuds out of the charging case and leave some time for them to pair with each other. Then please open the Bluetooth of your device to connect.

What can I do if the left earbud and the right earbud won’t work together?
1. Please use a bit of light sandpaper or microfiber cloth with a bit of rubbing alcohol to clean the charging connectors to ensure the earbuds charge well.
2. Put them into the charging case to reset.

• What can I do if the earbuds connect to my phone, but not my computer?
  1. UNPAIR the earbud from the phone, then the earbuds will lose Bluetooth connection to the phone and enter into pairing mode.
  2. Put the earbuds into the charging case to reset.
  3. Take them out of the case, then open the Bluetooth of your Mac book to connect.
  4. If those do not help, you may need to update your computer’s Bluetooth driver, which does not require a special driver itself and there is no driver for it. Bluetooth drivers must come from a specific manufacturer for your exact computer model. Download and install the appropriate Bluetooth driver from the computer vendor’s website, then restart your system before attempting to pair and connect to your SoundPEATS earbuds.
  

SOUND

• Why does the volume of the earbuds reduce after using a period of time?
  It may be caused by the soundhole being blocked by foreign objects. Please try to remove the silicone earpiece and gently clean off the screen with a little alcohol to avoid dust or secretions blocking.

• Why the other side could not hear me when calling?
  1. Please choose to pick up phone calls via earbuds.
  2. Please do not mute the phone calls.
  3. Please clean the Mic holes to avoid dust or secretions blocking.
  4. Please kindly adjust the volume through the earbuds and devices.
  5. If you are using the earbuds with an Android phone, please check the settings to see if you have allowed both phone audio and media audio to be transmitted through the earbuds.
  6. Please change to some other devices to see if the condition is the same.

CHARGING

What should I do if the charging case won’t charge?

Please try to use another known working cable to charge the case for more than 10 hours via a laptop or computer. Compared to other electronics, Bluetooth earbuds are low-power products. Hence, for charging safety, please do not use a fast charger.

What can I do if any earbud stopped charging?

Please close the cover of the case to charge. As for SoundPEATS T2, if you open the cover, the earbuds will search the Bluetooth automatically, so the earbuds are actually consuming the battery while charging, and power consumption is faster than charging.

The lights on the left and right sides of the charging box will flash blue slowly when charging. If not, please use a bit of light sandpaper or microfiber cloth with a bit of rubbing alcohol to clean the charging connectors.

TOUCH CONTROL

What can I do if the touch controls do not work always?

Please touch the middle of the control area, and keep your hands dry, the earbuds may not respond on wet fingers.
Please try to skip songs for more times to find your ideal frequency to control the earbuds.

Another way for you to have a try: discharge the earbuds, then charge and reset.

Why can’t I go back to the previous song when I listen to music?

SoundPEATS T2 only supports next track, not last track.

CUSTOMER SERVICE TEAM

What should I do if the problem about the earbuds is not mentioned in this FAQ?

If there is no solution for your problem in this FAQ, please feel free to contact our support team through your order or our contact in the manual, we will surely help you out soon. SoundPEATS provides 12-month warranty for every product. Your satisfaction is always greatly important to us.

References

• SOUNDPEATS Wireless Earbuds, Bluetooth Headphones, Speakers for Sound.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>