QCY T3 True Wireless Earbuds User Manual
- June 7, 2024
- QCY
Table of Contents
User Manual
Overview
How to Wear
Adjust Mic towards your mouth
Stereo Mode
Power off earphones then touches their Touch Bars for 5s or until LED blinks red and white with a voice prompt to enter pairing mode.
- TWS Mode: on a cellphone, search for QCY-T31 and tap to connect the master EarBud(left). Then your cellphone will receive a connecting request from slave EarBud(right), tap to accept it. (LED glows solid white for 2s)
- TWS+ Mode: on a cellphone, search for QCY-T3_L and tap to connect the master EarBud(left) and the slave EarBud will auto-connect then.(Note: TVVS+ mode is only available for cellphones with a Snapdragon 845 or newer chipset and Android v9.0.)
Stereo Mode
Power-on
Touch the Touch Bar for is to power on (LED will glow solid white for is)
When charging, open the charging case’s lid to power on (LED will glow solid
white for is)
Power-off
Touch the Touch Bar of either EarBud for 3s to power off that EarBud(LED glows
red for 2s)
Put EarBud into the case and close the lid.
Volume Control
Volume Up: when playing, slide up on the Touch Bar of the left EarBud
Volume Down: when playing, slide down on the Touch Bar of the left EarBud
Skip Track Forward/Backward
When plying, slide down/up on the Touch Bar of right EarBud to skip track
forward/backward.
Playback in Stereo Mode
Playback/pause
When playing in stereo mode, double click Touch Bar on either EarBud to pause
music and double click again to resume playing.
Reconnecting
Double click Touch Bar of either EarBud to reconnect it to a cellphone(LED
glows white for is with voice prompt) When two EarBuds are in the case, open
the lid and earphones will auto-reconnect to the cellphone in 5s (two EarBuds
need to be connected) Note: earphones will auto enter pairing mode if they
fail to reconnect in Ss
Mono Mode
- Power off earphones, then touch the Touch Bar on either EarBud for 5s to enter pairing mode(LED will blink red and white)
- On a cellphone, search for the EarBud(QCY-T3_R/L) and tap to connect.
- Pairing completed.
Power-on
Touch the Touch Bar for ls to power on (LED will glow solid white for Is)
When charging, open the case’s lid to power on the EarBud (LED will glow solid
white for 1s)
Power-off
Touch the Touch Bar for 3s to power off. (LED glows red for 2s I Put EarBud
into the case and close the lid.
Ignore Call
Touch the Touch Bar is to ignore the incoming calls.
Answer Call
Double click Touch Bar to answer an incoming call and double click again to
end it.
Playback/pause
When playing, double-click Touch Bar to pause and double-click again to
resume playing.
Volume Control
When playing, slide up/down on Touch Bar to tune volume up/down.
**Charging the Earphones
**
LEDs on EarBuds will glow solid red when charging and turn white for Los once topped.
Put EarBuds into the case to charge (pogo pins need to be well-contacted).
Charging the Case
All LEDs on the case will glow solid green once the case is topped up.
Charging the case via USB cable
Features
Up-to-date BT v5.0 chipset delivers signals stably with no lag
Touch control is easy to use
Noise isolation technology makes stereo talking crystal clear
Model: In1832
BT version: V5.0
Standby time: approx. 150hr
Charging time: approx. 2hr
Music time: appoint. 5 – 6hr
Operation range: 10m(with no obstacle)
Battery Type: Li-ion
Battery capacity(earphones): 3.7V 50mAh
Battery capacity(charging case): 3.7V 600mh
Input parameter(charging case): 5V = 500mA
BT profiles: FISP/HFP/A2DP/AVRCP
(All technical data shall be subject to practical performance)
Hazardous substances and their contents in the item
| Part Name | Hazardous Substances |
|---|---|
| (Pb) | (Hg) |
| Main body | X |
| Battery | 0 |
| Ear tips | 0 |
| Accessories | 0 |
| Charging cable | X |
This form is made by SJ/T 11364 regulation.
0 : means that hazardous substance content in the homogeneous materials
of this part is within the limits of GB/T 26572 regulation.
X : means that hazardous substance content in, at least, one certain
homogeneous material of this part is beyond the limits of GB/T 26572
regulation.
Notes : Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Perform standard: Q/HL 1-2016 ; Q/HL 2-2017
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Daojiao Town, Dongguan City, Guangdong, China
Tips
- Before using the headset, please read the manual carefully and keep it for future references.
- The headset needs to be fully charged prior to first-time
- If the headset is left unused for over two weeks, please recharge it
- Please use the chargers made by a qualified manufacturer.
- If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.
Caveats
- Never disassemble or modify your headset for any reason to avoid any damages and danger.
- Do not store the headset in extreme temperatures (under 0°C or over 45°C).
- Avoid using the indicator close to the eyes of children or
- Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the headset.
- Keep the headset dry.
FCC COMPLIANCE STATEMENT:
This device complies with Part 1S of the FCC Rules. Operation is subject to the fa aWrig h.o conditions– (1) This device may not cause harmful interference, and (2) this device must accept any interference fence ried, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Warranty Card
Warranty Period
12 months after you purchase this item.(or you may inquire your local
shopper for more details.)
Free Service:
Supposing any defects caused by quality issues occur within the warranty
period, please take this warranty card and purchase receipts to your
distributor for free exchange service.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:
Free exchange service will not be accessed under the following circumstances:
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by an act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.