CHOWIS CND-020-A Dermo Smart Skin Analyzer User Guide
- June 5, 2024
- CHOWIS
Table of Contents
CHOWIS CND-020-A Dermo Smart Skin Analyzer User Guide
1 Device Description and Specifications
Power Supply Input: 100-240V, 50-60Hz.
Magnification x20
Battery 5200mAh lithium-polymer battery
Product size 440x190xl 75(mm) handset 19x21x10(cm)
Product weight Camera: 150R approx.
Analysis result Index per measurement (0-99)
Measurement Moisture/Sebum, Pores, Spots, Impurities, Wrinkles, Keratin
2 Turn On Device
-
Plug in USB cord to the dock to charge the handset.
a. The ds viso handset is on its docking .
b. DC power socket located at the back side of docking
c. The battery needs to be fully charged around
4 hours and the device needs to be turned off.
d. Single full charging enables the device to be used for around Z hours .
e. The charging pin connection needs to be checked before charging .
f. Docking- handset holder charges the handset . -
Turn on device by switching button. Measurement Indicator will have blinking light.
3 Using App
Connecting Dermobella Skin App and Diagnosis
- Download and install “Dermobella Skin” on App Store for IOS or Google Play Store for Android. or scan QR code:http://l.ead.me/bb1W3R
- Input Optic Number on app.
- Connect with device via Wi-Fi with default password DEFAULT PASSWORD: 1234567890
- Skin app: Total diagnosis and Quick diagnosis.
Total Diagnosis shows a table of customer. Add, edit or delete customers, also see or compare results .
Quick Diagnosis don’t need full customer information. Only needs: Gender > Age > Skin color group,, Inside the Dermobella Skin App are 3 buttons on the upper right corner of the screen .
- Wi-Fi button for internet connection available .
- Settings button for setting options of the App .
- Power button to shut down or restart device .
4 How to Measure
Dermobella Skin Measurement Keratin
5 How to Analyze
Results After Measurement
– FCC §15.21 Information to user.
The users manual or instruction manual for an intentional or unintentional
radiator shall caution the user that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. In cases where the manual is provided only
in a form other than paper, such as on a computer disk or over the Internet,
the information required by this section may be included in the manual in that
alternative form, provided the user can reasonably be expected to have the
capability to access information in that form.
– FCC §15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the
user shall include the following or similar statement, placed in a prominent
location in the text of the manual: Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
– FCC Notice :
1.1 Liability for illegal acts Anyone who uses this product for illegal
purposes shall be liable and he or she shall be held responsible for all and
any consequences.
1.2 FCC licensing information Federal Communications Commission statement
NOTE: Change or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio, TV technician for help.
– Only shielded interface cable should be used. Finally, any changes or
modifications to the equipment by the user not expressly approved by the
grantee or manufacturer could void the user’s authority to operate such
equipment.
NOTE: Exposure to Radio Frequency Radiation. Antenna shall be mounted in such
a manner to minimize the potential for human contact during normal operation.
The antenna should not be contacted during operation to avoid the possibility
of exceeding the FCC radio frequency exposure limit. NOTE: This device
complies with part 15 of the FCC Rules. NOTE: Operation is subject to the
following two Conditions:
This device may not cause harmful interference, and This device must accept
any interference received, including interference that may cause undesired
operation.
NOTE: This appliance and its antenna must not be co-located or operated in
conjunction with any other antenna or transmitter. This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. This transmitter is
considered as mobile device and should not be used closer than 15 mm from a
human body.
Scan to see Training Videos
Password: CHOWISDBSKI
N2020https://l.ead.me/bbZDrOhttps://l.ead.me/bbZDlF
https://so.youku.com/search_video/q_chowis
Email: chowis@chowis.com
Skype ID: Hello Chowis Skype
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>