ACETECH AC6000MKIII, AC6000MKIII BT Chronograph User Manual

ACETECH AC6000MKIII, AC6000MKIII BT Chronograph

Specifications

• Power Supply:

  • Option 1: AA Alkaline battery x4
  • Option 2: External Type C power cable with adaptor (Voltage 5V,
    Current 0.5A or more)

• Display: 240×240 pixel LCD

• Function Settings: Muzzle Velocity, ROF, Energy, AMMO quick selection, and more

• Bluetooth: Connectivity

Product Usage Instructions

Safety and Precautions

1. Ensure proper power supply using specified batteries or external Type C power cables.
2. Avoid hitting the chronograph with BBs to prevent damage.
3. The device will shut down automatically when the battery is low.
4. Maintain a safe distance when using gas/CO2 GBB or gel blaster to avoid inaccurate readings.

Contents

• AC6000MKIII Series Chronograph Bag x 1
• User Manual x 1

Feature Locations

The AC6000MKIII series includes AC6000MKIII, AC6000MKIII BT, and AC6000MKIII BT Exclusive Edition.

• AC6000MKIII:
  • Bluetooth
  • Shooting Tube
  • Chronograph Bag made of Plastics
• AC6000MKIII BT:
  • Plastics Construction
• AC6000MKIII BT (Exclusive Edition):
  • Aluminum construction

FAQ

Q: How do I change the batteries in the chronograph?

A: To change the batteries, locate the battery compartment and replace the old AA Alkaline batteries with new ones following the correct polarity.

Q: Can I use rechargeable batteries with the chronograph?

A: It is recommended to use AA Alkaline batteries or an external Type C power cable with an adaptor for optimal performance.

All the specific actions and contents are only for reference, please make the object the standard, and in this manual are subject to change without notice.

Safety and Precautions

1. Power supply:
   • option1: Use AA Alkaline battery x4
   • Option: Use an external Type C power cable with an adaptor Voltage of 5V and current of 0.5A or more.
2. Avoid hitting any part of a chronograph with the BBs.
3. Shut down automatically if the battery is out.
4. Keep a certain distance from the chronograph when using gas/ CO2 GBB or gel blaster to avoid disturbed readings.

Contents

Chronograph Bag: only available for AC6000MKIII BT [Exclusive Edition]

Feature Locations

1. AC6000MKIII series includes AC6000MKIII, AC6000MKIII BT, and AC6000MKIII BT Exclusive Edition; the details are as follows.
2. Display: 240×240 pixel LCD.
3. AC6000MKIII Series.

Function settings

1. 2 SCR1: Muzzle Velocity, ROF, Energy, and AMMO quick selection function.
2. SCR2: Provides 25 latest continuous firing speed and muzzle velocity test data for users to analyze the performance of BB guns.
   • Note: The upper column of MAX, MIN, and AVG is the continuous launch speed, and the lower column is the initial speed.
   • Use the up and down key to view 25 rounds of speed measurement data.
   • Clearing the History: Press and hold the up button for 3 seconds to clear the history.
3. SCR3:

MENU: Function Setting Screen

AMMO: B.B. Parameter Setting

• A total of 5 groups can be set, and the weight (g) and diameter (mm) of each group can be set.

UNIT:

1. ROF: RPM: Round Per Minute RPS: Round Per Second
2. SPEED: m/s (meters/seconds) ft/s (feet/seconds)
3. WEIGHT: gram (g) grain (gr) (1 grain=0.0648gram)
4. ENERGY: joule ft-lb
   • Click the Direction button to switch between SCR1/ SCR2/ SCR3/ MENU.

MENU: Function Setting Screen

APO: Automatic Shut Down Setting

1. APO can be set to automatically shut down when not in use for 5 to 60 minutes to save power.
2. USB APO ON/OFF APO function can be turned on or off when using USB power.

BRIGHTNESS: LCD Brightness Setting

1. ADJUST: Adjustment range: 0 ~ 10
2. Set to the Default Value
   • Note: The default value is 6.

MENU: Function Setting Screen ALARM: Energy / Velocity Upper Limit and Warning

1. ENERGY: joule
2. SPEED: m/s ****

When the energy or Muzzle Velocity reaches the upper limit, a red or yellow warning will appear on the screen accordingly.

RESET: Restore to Factory Settings

1. RESET AC6000: Restore to factory value
2. Version display
3. Serial number display

APP operation instructions

For AC6000MKIII BT & AC6000MKIII BT Exclusive Edition

1. Go to the APP store search for AceSoft and install it.
2. Start APP, AC6000MKIII BT, and mobile phone Bluetooth.
3. Please refer to the figure below for the first time use. Click on the AC6000MKIII BT icon and a reminder icon will appear during pairing.
   • At this time, press the AC6000BT power button to complete the pairing. (APP system display AC6000 BT = AC6000MKIII BT).
4. After the pairing succeeds, you will see the following screen. The gray area is the speed measurement result.
5. From left to right, the blue boxes above are No./Time switch, RPS/RPM switch, m/s and ft/s, and Joule/ft-lb/(J/cm ).2
6. The orange blocks on the right from the top to the bottom are respectively Ammo 1 ~ 6 for selection to test at the highest speed/RPS, average speed/RPS, and lowest speed/RPS.
7. From left to right in the green box below, the shooting data is stored, the shooting data is cleared, and the data chart is switched.
8. Tap the icon on the top right of the screen to enter the settings page.
9. The setting page is as follows:
   • a) Ammunition can be set.
   • b) Updating the device (you can upgrade here if new firmware is released).
   • c) Restore to the default.
   • d) Alarm settings.
   • e) The current version of the device.
   • f) The current serial number of the device.
   • g) Device; tap to jump to the homepage.
   • h) Records; read the pre-stored shooting data.
   • i) Shop; tap to enter the ACETECH homepage.

Specifications

1. Muzzle velocity measurement range: 30.00 ~ 400.0 (m/s).
2. ROF(Rate Of Fore ) measurement range: 100 ~ 5000 (rounds/minute).
3. The diameter of the shooting gate is 36mm, which is suitable for 4.5mm, 6mm, 9mm, and 8mm B.B. specifications currently on the market.
4. 1/4” tripod mounting hole.
5. Use AA Alkaline battery x 4
6. Size: 130 (L) x 108 (W) x 61 (H) mm.
7. Weight: AC6000MKIII BT: 300g (without battery).
   • AC6000MKIII BT Exclusive: 336.4g (without battery).

Warranty

1. Warranty does not include damage from incorrect usage, external force, or liquid intruding inside the product.
2. Any incorrect usage caused by liquid intruding inside will be not covered by the warranty.
3. Please refer to the Acetech official website for the detailed warranty date.

FCC Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

RF exposure warning:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Caution:

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.

• www.acetk.com
• acetech007

Documents / Resources

| ACETECH AC6000MKIII, AC6000MKIII BT Chronograph [pdf] User Manual
0PAT6210, AC6000MKIII BT, 2AVZW0PAT6210, AC6000MKIII AC6000MKIII BT Chronograph, AC6000MKIII, AC6000MKIII BT, AC6000MKIII Chronograph, AC6000MKIII BT Chronograph, Chronograph
---|---

References

• Acetech | Light Up Your Game!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>