Roxcore Pins ANC TWS Earbuds User Manual
- June 7, 2024
- Roxcore
Table of Contents
Roxcore Pins ANC TWS Earbuds
Specifications
Bluetooth: v5.0
Frequency: 20 Hz – 20 KHz
Sensitivity: 101 +/- 3 dB at 1 kHz
Cancellation: up to 18 dB
Range: up to 10 m
Talk/play time: up to 4 h (70 % volume)
Charge time: (earbuds) 2 h
Charge time: (case) 2 h, full battery last 3 charges
Charging: USB-C
Battery: (earbuds / case) Li-po 3.7 V, 43 mAh / 3.7 V, 430 mAh
Before using
Please charge your Pins ANC TWS earbuds before use.
Featured with minimalistic buttonless tap control, simply take the earbuds out
of the charging case and wear to start using, TWS earbuds will be
automatically powered on shortly and wait to paired.
Use
Power on/off
To start the headset, take the earbuds out of the case. Place the earbuds back
in the case to turn them off or press and hold the earbud for 4-5 seconds.
They can also be activated by pressing and holding the touch bar on the
earbuds for 2 seconds if they’re not in the case.
Charging
Connect the USB-C cable to the charging port on the case and a computer or a
USB power adapter. There are four LED indicator on the case to indicate the
battery level. When Charging the charging base. One light is always on to be
full 25%, two lights are always on to be full 50%. three lights are always on
to be full 75%. four lights always on to be full 100%. Each earbud has a LED
indicator that will turn on and shine red when they are being charged in the
case and LED indicator the left and right sides of the case will flash. When
the earbuds are fully charged the indicators on them will turn off.
Pairing
Open the case. Remove the earbuds, they will start blinking and pair together.
Open Bluetooth settings on your device and find Roxcore Pins ANC and choose to
connect. Pairing will occur automatically after this each time the earbuds are
removed from the case.
Managing music and personal assistant
Press either of the earbuds once to play or pause music.
Doubleclick the right earbud to raise the volume or the left to lower the
volume. Tripleclick the right earbud to go to the next song and the left
earbud to play the previous song.
Press and hold either earbud for 2 seconds to start the personal assistant on
your device (Siri and Google Assistant).
ANC Controlling
Quick click one time + press and hold either earbud for 2 second to open and
closed ANC function
Managing calls
Press either earbud once to answer or hang up a call.
Press and hold either earbud for at least two seconds to reject an incoming
call.
Press and hold either earbud for 2 seconds to Switch between earbuds and phone
calling
Troubleshooting (Resetting)
If the earbuds are having any problems including L/R channel disconnection or
pairing/connectivity issues with the mobile device your device. Please the
following method for reset.
- Make sure the earbuds turn off, pressing the two earbuds around 10 seconds until LED Blinking red for 2 second.
- Place the earbuds to the charging case and leave the lid closed for 5 seconds, and take them out.
FAQ
Pairing fails.
-
Put the earbuds back to the charging case and make sure that they are off.
Take the earbuds out of the charging case and they will enter pairing made automatically. -
Choose ‘ Roxcore Pins ANC’ in your phone to pair.
If the pairing still fails. check the fallowing points:- Make sure the earbuds and your Bluetooth device are next to each other or within 10 meters and there are no obstacles between.
- There are no signal interferences nearby check the question “Connection is not stable for signal interference conditions’
- Try to reboot your Bluetooth device.
I paired the earbuds with my phone before, but I failed to pair them with
my phone again.
Turn on the Bluetooth of your phone and in ‘MY DEVICES’, choose ‘ Raxcare
Pins ANC ‘ and tap ‘<D” then “Forget This Device’. Then pair the earbuds with
your phone again.
Connection is not stable.
Make sure that the Bluetooth connection distance is within 10 meters and there
is no object between the earbuds and your Bluetooth device, no radio or WIFI
interference nearby.
Power runs out fast.
The earbuds playtime varies according to the volume level and audio content.
Please put the earbuds back into the charging case to avoid unnecessary power
consumption.
The earbuds which are being charged in the charging case reconnect to my
phone
When the charging case is out of power during charging, the earbuds will
automatically turn an and reconnect to the last paired Bluetooth device. If
the earbuds are not paired with the Bluetooth device, they will be
automatically off after 5 minutes.
Safety information
This product contains a rechargeable Li-po battery and the battery can not be
replaced.
To prevent possible hearing damage, do not Listen at high volume levels far
long periods.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>