97685 Roxcore Blaster One User Manual
- June 6, 2024
- Roxcore
Table of Contents
Item: 97685
manual
www.roxcore.com
Box 50435 Malmé Sweden
2018-02-01
Overview
| 1. Power | 6. Charging port |
|---|---|
| 2. Forward | 7. AUXin |
| 3. Handsfree | 8. Volume + |
| 4. Back | 9. Volume – |
| 5. Play/pause |
Specifications
| Power: | 20 W (2x 10 W) |
|---|---|
| Bluetooth version: | 4.2 |
| Bluetooth range: | 10 meters |
| Line in (AUX): | 3.5mm |
| Battery time: | 6-9 hours |
| Charging port: | Micro USB (5 V, 2 A} |
| Charging time: | 3 hours (with 2 A) |
| Dimensions (WxHxD): | 75 x 195 mm |
| Wireless Frequency | 100 Hz-1800 Hz |
| Transmission Power | 7dBm |
Included
- Speaker
- 60 cm Micro USB cable
- 60cm 3,5 mm cable
- Manual
Use
Battery
The battery lasts for 6-9 hours when it has been fully charged. The LED on top
of the speaker will blink red if the battery is lower than 10 %.
Charge
Connect the Micro USB cable to the charging port (6) and a USB charger. The
LED will shine red whilst charging if the speaker is off or blink red and blue
if it is activated. The speaker is fully charged after 3 hours (with 2 A
charge). The LED will shine green when it is fully charged. The speaker can
be used while it is charging.
Pairing (Bluetooth)
Turn on the speaker with the Power button (1), press, and hold it for 3
seconds. The LED will blink blue.
Activate Bluetooth on your device. Search for nearby Bluetooth devices and
choose “Blaster One” from the list. Once connected, the LED will shine blue.
The speaker can remember up to 8 previous devices and will automatically pair
up with one if possible. Press and hold the play/pause button (5) to
disconnect the currently paired Bluetooth device.
Contro! music (only if connected via Bluetooth)
With the buttons, you can control the music on a connected Bluetooth device.
Back button (4). Press once, hold, or double click to rewind to the start
of a song.
Play/pause button (5). Press once to play or pause the music.
Forward button (2). Press once, hold, or double click to play the next
song.
Handling calls (only if connected via Bluetooth)
Answer call: Press the handsfree button (3} once.
End call: Press the handsfree button (3) once. Bluetooth music will
resume.
Declitie call. Press and hiuid the landsiree Wutiut (3).
Redial last called number: Press and hold the handsfree button (3) for 3
seconds.
Connect via cable
Connect an audio cable to the AUX-in (7) port and your device’s port. The LED
will shine green.
The speaker will automatically disconnect any currently connected Bluetooth
devices. You can manually activate the AUX mode by pressing the power button
(1) once to switch to the current audio mode.
Volume
Turn the volume wheel clockwise to raise the volume (8). Turn the volume wheel
counter-clockwise to lower the volume (9). The speaker will emit a beep when
it reaches maximum volume.
Troubleshooting
If there is no volume (or low}, try to raise the volume on your device and the
volume on the speaker. Bad sound quality or no sound at all. For Bluetooth
connection, check that the correct device is connected and not too far away.
For cable connection, check that the cable is plugged all the way in at both
ends and that the cable is not faulty.
Safety information
The speaker contains a rechargeable Li-ion battery and the battery can not be
replaced.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
Full text of the EU declaration of conformity is available at
www.kjell.com/97685
Note!
If you encounter any problems with the manual, please go to www.kjell.com/97685 for an updated version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>