ROXCORE Avenue ANC User Manual
- June 7, 2024
- Roxcore
Table of Contents
manual
Item:90400
Overview
1.ANC button
2.ANC LED
3. 3.5 mm AUX-IN
4. Volume +/Next track
5.Bluetooth button| 6.Bluetooth/Charge LED
7.Volume-/Previous track
8.USB charge port
9. Microphone
---|---
Specifications
| Bluetooth version: | 5.0 |
|---|---|
| Distance: | 10 m |
| Sensetivity: | 118 +/- 3dB/1 mw (S.P.L. at 1 kHz) |
| Listening frequency: | 20 Hz – 20 kHz |
| Cancellation: | up to 22 dB |
| Charging input: | 5 V, 500 mA |
| Charge time: | 2 h |
| Battery time: | Up to 40 h (12 with ANC active) |
| Charging cable: | USB-A to USB-C |
| Audio cable length: | 120 cm |
| Weight: | 190 g |
Use
Power on/off
To turn on the headphones, press and hold the Bluetooth button (5) until the Bluetooth LED (6) blinks blue. Press and hold the Bluetooth button again until the Bluetooth LED blinks red and the headphones will turn off.
Charging
Connect the USB cable to the charging port (8) and a computer or a USB power adapter. The charge LED (6) will shine red during charging and turn blue when the battery is fully charged. The LED will flash red if the battery level is low. Note: The headphones will turn off when connected to a charging source.
Pairing
Make sure the headphones are turned off. Press and hold the Bluetooth button for 5 seconds to enter pairing mode. The Bluetooth LED will blink blue and red. Turn on Bluetooth on your device and search for “Roxcore Avenue “, select it when found. If necessary, enter the passcode, “0000”, to pair and connect the headphones. Some devices also ask to confirm the headset connection after pairing. The Bluetooth LED
will blink blue after the pairing is successful. If no Bluetooth devices are paired within 15 minutes the headphones will turn off.
General functions
Change the volume with the + & – buttons (4 & 7). You can also skip to the
next track or go to the previous by holding in the corresponding button. Play
or pause the current track by pressing the Bluetooth button.
To answer or end a call, press the Bluetooth button. Press and hold it for at
least 2 seconds to reject an incoming call. Doubleclick it to redial the last
call.
Note: The functions of the buttons may not always be the same for all devices
and brands.
Noise Canceling Function (ANC)
When you press the ANC button to the “On”, the green LED will light on, then you can enjoy the headphone in Noise cancellation mode. When you don’t need the Noise cancellation function, please press the ANC button to turn off.
Multifunction button
There is a multifunction button on the included 3.5 mm audio cable. You can use this to answer incoming calls or manage music. Make sure the headphones are turned off before connecting the cable. Connect the end with the headphone symbol to the headphones and the other end to your device. During an incoming call press, it once to answer. Press it once during an ongoing call to hang up. When playing music press once to play or pause a track, double click to go forward to the next track. Triple-click to go to the start of a track or jump two tracks forward depending on the phone model. There is also a microphone situated near the multifunction button that can be used during phone calls.
Note: The functions of the button may not always be the same for all devices
and brands.
Note
The earcups can only rotate 105 degrees.
This product contains a rechargeable Li-ion battery and the battery can not be
replaced.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
www.roxcore.com
Box 50435, Malmo,
Sweden
2020-05-20