Goodmans 7″ Portable DVD Player User Guide

7” PORTABLE DVD PLAYER

7” Portable DVD Player
MODEL: 355878

GETTING STARTED

Note: Your portable DVD player has an internal battery which must be charged before use.

1. Open the screen and press open to access the DVD compartment. Remove the card and close the lid.

2. Connect the mains power lead into the DC socket on the right-hand side of the DVD Player, it is important to make sure the power switch is in the OFF position. Turn on the power at the wall socket and the charging light on the front of the unit will show as red. A green light will indicate the battery is fully charged.
   Note: It will take approximately 4 hours to fully charge the battery.

3. When fully charged turn the DVD on by moving the power switch to the ON position.

THANK YOU

Thank you for choosing a Goodmans product. We’ve been making electrical products for the British people for over 90 years.  Each of our projects has been carefully designed to be great at what it does and this one is no exception. We hope you enjoy your new Portable DVD Player.
Please read the Guarantee & Safety booklet before starting.

DID YOU KNOW?

You can remote the display by 180 degrees clockwise and fold it flat with the display facing up for compact viewing.

1. TFT Display

2. Speakers

3. DVD disc compartment
   Press the (OPEN) button to OPEN/CLOSE the DVD compartment lid and remove the cardboard shipping protector before disk playback.

4. O PEN/CLOSE button
   Press to OPEN/CLOSE the DVD compartment lid

5. MENU/SOURCE button
   Press to display the DVD  MENU screen (if available) Press and hold to switch between AV IN and DVD modes.

6. VOLUME +/SETUP button
   Press to increase the volume in steps Press and hold to enter/ exit the SYSTEM SETUP menu.

7. VOLUME -/STOP button
   Press to decrease the volume in steps Press and hold to STOP DVD playback

8. Navigate LEFT/FAST BACKWARD button

9. Navigate UP/SKIP BACK button

10. Navigate RIGHT/ FAST FORWARD button

11. PLAY/PAUSE/OK button
    Press to PLAY/PAUSE the DVD playback Press to ENTER or SELECT an option  Press and hold to display and select DVD/SD/USB modes

12. Navigate DOWN/SKIP FORWARD button
    Press and hold to display and select DVD/SD/USB modes

Install the remote control batteries

1.  Press down the tab on the remote control battery door, in the direction of the arrow, to remove it.
2.  Insert the 2 x AAA batteries supplied, taking care to note the + and – markings, and position the batteries the correct way around.
3. Replace the battery cover, making sure that it ‘clicks’ shut.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>