dams Fuze Outer Leg Instruction Manual

: June 7, 2024
: dams

Table of Contents

TOOLS REQUIRED FOR ASSEMBLY
Back to Back Desk Assembly
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

FZ1600OL
Fuze Outer Leg

dams Fuze Outer Leg -

Used to build

dams Fuze Outer Leg - Used to build

Fuze Back to Back Desk Fuze Boardroom Table

TOOLS REQUIRED FOR ASSEMBLY

dams Fuze Outer Leg - FOR ASSEMBLY

DONT STRUGGLE 2 MAN LIFT

dams Fuze Outer Leg - 2 MAN LIFT

ALWAYS HANDLE ITEMS WITH CARE

dams Fuze Outer Leg - TEMS WITH CARE

IF UNSURE CALL FOR ASSISTANCE

dams Fuze Outer Leg - FOR ASSISTANCE

KEEP FITTINGS AWAY FROM CHILDREN

dams Fuze Outer Leg - FROM CHILDREN

Please check that you have all the components

dams Fuze Outer Leg - Please check

$dams Fuze Outer Leg - OUTER LEG FRAMES \($

dams Fuze Outer Leg - BEAM PACK

Back to Back Desk Assembly

S tep 1
Insert the beam infill blocks into both ends of the beam.

dams Fuze Outer Leg - infill blocks

Step 2
Push the beams onto the 1st leg frame lining up the beam holes with the M6 threaded holes on the leg.
Ensure the screen fixing points on the outer leg and cut-out slots on the beams are facing inwards.

dams Fuze Outer Leg - e beams onto

Step 3
Once the holes are aligned fix the beam in place using the M6 x 25mm Connect Bolts.

dams Fuze Outer Leg - holes are

Step 4
Push the beams onto the remaining leg frame lining up the beam holes with the M6 threaded holes on the leg.

Please Note
If you have purchased a larger configuration of the desk than the one shown please refer to the FZ1600IL instruction before proceeding with step 4

dams Fuze Outer Leg - beam holes

Step 5
Once the holes are aligned fix the beam in place using the M6 x 25mm Connect Bolts.

dams Fuze Outer Leg - 25mm Connect

Please Note
If you have purchased a sliding top system please refer to the sliding top bracket assembly instruction from this point onwards.

Step 6
Position the Spacer Blocks over the holes in the leg frames.

dams Fuze Outer Leg - Ensure that the

dams Fuze Outer Leg - Brackets and

Please Note
For ease of assembly Screen Brackets and Horizontal Cable Trays should be fitted before you proceed to Step 7.

Step 7
Place the desktop onto the assembled framework ensuring that the edges of the desktop finish parallel with the end of the leg frames.
The framework may be slightly out of square, if this happens loosen the fixing bolts in the beams and align correctly before re tightening the bolts.

dams Fuze Outer Leg - Place the desktop onto

dams Fuze Outer Leg - or

Step 8
Attach one side of the desktops to the frame using the M6 x 60mm Connect Bolts.
Ensure that the bolt passes through both the leg frame and spacer Block.

dams Fuze Outer Leg - Ensure that the bolt

Step 9
Attach the remaining side of the desktops to the frame using the M6 x 60mm Connect Bolts.
Ensure that the bolt passes through both the leg frame and Spacer Block.

dams Fuze Outer Leg - Attach the remaining