dams BCNEW-BC Instructions
- June 7, 2024
- dams
Table of Contents
dams BCNEW-BC Instructions
Please read before assembling the product
Carefully open packaging.
Check you have all the components shown on instructions sheets. Some products,
instructions and fittings are packed in more than one box. Handle Panels with
care. Complete each stage before going to the next one. Please keep packaging
until assembly is complete. We hope that you are happy with the product.
- Please recycle packaging
No power tools when inserting cam pins
-
Keep fitting away from children
-
No power tools when tightening cams
If this unit is to be stand against existing bookcases, you will need to check that the position of the shelves match your existing spacing.
Assembly Note:
This instruction shows how to assemble the product with spacing for A4 files,
as per the dimensions illustrated in this diagram.
Please check with the end user before assembling the bookcase, as to their spacing requirements.
Please check that you have all the fittings
BC
1| 4mm Allen key ALK01
12| Cam 15N cam03
12| Mini fix pins 24mm PIN04
4| Shelf clip PAR07
28| Panel pin SCR34
4| Wood dowel 5mm WOW1
Please check that you have all the panels
1 | Plinth |
---|---|
1 | Folded back |
2 | Universal side |
1 | Shelf |
3 | Fixed shelf |
Universal Side Assembly
Note: Once the fixed shelves are fitted you will not be able to re-
position them without disassembling the entire unit. Please check you have
positioned the shelves with the correct spacings before proceeding.
If this unit is to be stand against existing bookcases, you will need to check that the position of the shelves match your existing spacing.
Fixed Shelf
Insert the cam into the ‘surface’ hole with the arrow aimed at the adjacent edge which has the smaller hole.
Plinth
Make sure you turn the cams as far as they will easily go -more than half a turn.
Assembly Note: Once the fixed shelves are fitted you will not be able to re-position them without disassembling the entire unit. Please check you have positioned the shelves with the correct spacings before proceeding.
Make sure you turn the cams as far as they will easily go -more than half a turn.
Assembly Note: Measure to the centre of the fixed shelf. Make a note of the dimension here
Fixed Shelf
Assembly Note: Refer back to stage 7 where you wrote the measurement to the fixed shelves. Measure to the centre of the fixed shelf and then pin through the back as shown. A tape measure is required.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>