dams Boardroom Table Trumpet Base User Guide
- June 7, 2024
- dams
Table of Contents
BTTB / BTTC
Boardroom Table – Trumpet Base
Please check that you have all the fittings
Step 1
Screw the nut until it sits flush with the end of the threaded bar.
Step 2
Push on the top fixing bracket all the way until it meets the nut. The nut
should sit inside the pre-moulded recess inside the top fixing bracket.
Step 3
Place on the floor with the threaded bar facing upwards as shown.
Slide the column onto the bar ensuring that the bar comes through the central
hole in the column.
See Diagram A.
The assembled base should now look like diagram B
Step 4
Place the trumpet base onto the threaded bar. Once again ensure that the bar
comes through the central hole in the base.
Step 5
Attach the trumpet base to the column using the 3 x M8 machine bolts.
Step 6
Place the 4kg counterweight onto the threaded bar.
Step 7
Place the 8kg counterweight onto the threaded bar.
Step 8
Screw on the remaining nut to the threaded bar.
Tighten up as much as possible to remove any wobble or movement in the table
column.
Step 9
Turn the table base upright.
Refer to the table top instructions for details on how to attach your table
top to the base.