FTX Vortex 24G RC High Speed Racing Boat User Guide
- June 7, 2024
- FTX
Table of Contents
- Main Structures of RC Boat
- Methods for Installing Batteries of Remote Controller
- Battery Charging Instruction
- Methods for Installing Batteries of Boat Controller
- RC Boat Design Highlights:
- Operating Preparation
- Regulation
- Switch High & Low Speed
- Operating Methods
- Regulating
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
2.4G RC HIGH-SPEED RACING BOAT
FTX0700
NOTICE: That’s a normal phenomenon if water comes into the boat during
running, all the inner parts are waterproof and will not affect performance.
You only need to open the water outlet to pour out the water after each use.
ATTENTION: Please read all the warnings and instructions carefully before
using this product
Main Structures of RC Boat
Methods for Installing Batteries of Remote Controller
Open the battery cover of the remote controller; insert 4 X 1.5 V AA batteries into the battery case according to positive and negative electrodes, close the battery cover. (Batteries not included)
Battery Charging Instruction
Insert one side of the USB connector into the battery, and the other side into any computer USB port.
Methods for Installing Batteries of Boat Controller
RC Boat Design Highlights:
- Unique cooling system
- Waterproof
- Anti-collision
- Hidden wires inside the cabin
- One-key rolling
- Low battery condition for remote control is alerted by a “beep…beep” sound
- Low battery condition for the boat is alerted by a “beep-beep 、beepbeep” sound of remote control
Operating Preparation
- Install and connect the battery to the boat.
- Attach and secure the top cover and place the boat in the water.
- Power on the controller. The red LED light will flash rapidly.
- The controller will automatically connect to the boat.
- The controller LED light will be solid and a “beep” sound emitted to confirm that the connection has been successful.
Put the boat into the water, the boat will turn on automatically.
Note: The boat must first be placed in the water before any connection can be made
Regulation
After the controller is connected to the boat successfully, if the propeller moves or makes any sound without pushing the accelerator, press the regulating button for adjustment. If the propeller rotates to the left, press the right regulating button. If the propeller rotates to the right, press the left regulating button.
Switch High & Low Speed
The boat starts up with default high speed, press the speed button to change it, one “beep” for low speed, two “beeps” for high speed.
Operating Methods
Regulating
FTX IS AN EXCLUSIVE BRAND OF CML DISTRIBUTION
SAXON HOUSE, SAXON BUSINESS PARK, HANBURY ROAD, BROMSGROVE,
WORCESTERSHIRE, B60 4AD ENGLAND.
EMAIL: INFO@FTX-RC.COM WEB: WWW.FTX-
RC.COM