ALCOOK Professional Blender User Guide

PROFESSIONAL BLENDER

NY-8608MA
READ THIS MANUAL THOROUGHLY
BEFORE USING AND SAVE IT FOR FUTURE REFERENCE

SAFETY PRECAUTIONS

Please read this instruction carefully before using it.
Check the local voltage whether matches up the rated voltage of the product.

1. 1n case of electric shock or fire, do not put product. power cord and plug into water or other liquid.
2. Using blender should be under monitor by adults. Do not let children and no self-care ability people close to the blender.
3. Unplug the plug before using or cleaning the machine. When removing the cup of the machine, make sure the motor is power off.
4. Takeoff and unplug blender from the power source before using or changing accessories. The product and power cord should be put in a safe place to avoid children pulling the cord.
5. Do not use the appliance if the power cable, cord plug is broken or defective, please contact customer service to apply to return or refund attach order id.
6. .Please put the blender on desk or flat place when using, do not hang over the cord.
7. Please do not use a blender under such situations: high tem­perature, near inflammable gas and electric stove, etc.
8. Do not open the blender lid or touch blade parts before the machine stopping to work.
9. The blades are sharp, please be careful when assembling or cleaning, in case of hurting yourself.
10.  Do not use attachments, including canning jars, with the blender. The use of attachments that are not recommended by the manufacturer can result in injury and damages.
11. Do not immerse the jug in water or other liquid while clean­ing.
12. Make sure the lid is well installed, or the blender can not work.
13. Keep the manual for future reference.

PRODUCT SPECIFICATION

SPECIFICATION

CONTROL PANEL

Precautions

CONTROL PANEL

1. Check all parts are complete, the base is completely good or not. And then put 1000m1 water into the jug, clean it at 5-speed for 1nnin, then pour away the water.
2. Start with slow speed while blending liquid, to avoid the liquid spilling out of the jug. Adjust to suitable speed when liquid is stable.
3. When the ingredients do not move or are difficult to blend, use Pulse function or tamper to resume blending.

Warning: The blades are sharp. Do not touch it directly.

FUNCTION SPECIFICATION

1. When the power is on, make sure the speed control is at “MIN” position and the function knob is at “0” position, then adjust the speed dial from low to high speed in the clockwise direction. The machine will stop when set at “MIN” position.
2. When the power is on, make sure the speed control is at “MIN” position and the function knob is at the “0” position, adjust the speed dial to the desired setting in the clockwise direction. 3 seconds later start to work automatically. The machine will stop when set at “0” position during working.
3. When the power is on, the function knob is void(useless) while the speed control knob is working; or the speed control knob is void(useless) while the function knob is working.
4. Pulse switch: When the ON/OFF switch is in the OFF posi­tion, flip the “Pulse” button to Pulse. The product will gradually accelerate to the highest speed within 3 seconds, and it will stop when you release the button. When the ON/OFF switch is in the ON position, flip the “Pulse” button to Pulse when the speed control knob is working, the product will gradually accel­erate to the highest speed within 3 seconds. The Pulse switch is valid when the function knob is working.

HOUSEHOLD USE ONLY

Shenzhen Impression E-commerce Co..Ltd
Booth No.3H012. Trading Pim. No.5.Huanan city.
Pinghu Street, Longgang DistrictShenzhen.China Facebook Page: https://www.facebock.00mMicoc4 -144643912909738/
Website: www.acock.cc

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>