ALCOOK Juicer Instruction Manual

ALCOOK Juicer Instruction Manual

Please read the manual carefully before using the Machine and keep it for future reference.

Usage Safety Instructions:

1. Please read the manual carefully before using the Machine.
2. Check if the voltage you are using matches the voltage listed on the Machine.
3. Do not immerse this Machine (including heating jug), power cords, and plugs in water or other liquids to prevent fire, electrical leakage, or endangering personal safety.
4. When using this Machine, someone should watch it. Do not allow children and no self-care ability of person to approach the Machine.
5. Unplug the socket before using or cleaning the Machine. When removing Jug from the Machine, make sure the motor is in stationary condition.
6. If the power cord, plug is damaged, or the appliance fails or is damaged due to other reasons, please do not use it. Contact the manufacturer’s customer service or send the Machine to the nearest authorized service outlet for inspection, repair, replacement, and debugging.
7. If the power cord is damaged, it must be replaced by the manufacturer or authorized agent, or a qualified technician, to avoid any hazard.Place the Machine on a counter top or flat surface.
8. Do not hang the power cord on the edge of the desk or desk.
9. Do not use at high temperatures or near flammable gases, electric furnaces, etc.
10. Do not open the lid and touch the blade until the Machine has stopped running.
11. The blade is very sharp and be careful when installing, removing and cleaning to avoid being cut by the blade.
12. Do not use accessories not recommended or sold by the manufacturer, including jug, lids, etc., to avoid danger.
13.  Jug with electrical components do not allowed to soak in water or other liquids.
14. Before the Machine is running, make sure the lid is in place, otherwise the Machine will not work properly.
15. In the heating mode, please operate strictly according to the jug body heating minimum and maximum water level lines to avoid excessive overflow and low impact on Machine life.
16. Do not touch the jug in the heating mode, only the handle with low temperature, to avoid burns.
17. This Machine is not suitable for children, people with disabilities, mental patients, people who are allergic to motor noise or are not familiar with the Machine. Unless the guarantor gives full supervision and guidance to the above personnel. Children are prohibited from playing with this Machine. Children under 8 years of age are not allowed to clean and maintain this Machine to avoid danger.
18. This Machine cannot be used outdoors.
19. This appliance is suitable for home and similar uses.
20. Machines and power cords should be stored in a safe place to prevent children from pulling on the power cord.
21. Save this manual for future reference.

Attention

| Before using this product. please read the instructions in this manual carefully.| | The pay er used should be 220V.

| Do not use this product for purposes beyond its functional scope.|

| Never let children use this machine.
| ‘When the power cord. plug is broken or the function fails. stop using this product.| | Do not let the power cord touch sharp edges or hot surfaces.
| This machine must be placed on a stable.. reliable work surface.| | Please hold the plug when pulling the plug. do not pull the power cord.
| Do not use the machine outdoors.|

| Co not intrude this machine. into water or any other liquid
| To ensure safety. do not disassemble this machne.lf there is an abnormality. please contact the customer service hotline printed on the back of the manual and must be repaired by the manufacturer or a specialist of the designated after-sales service center.

Machine Main Components Schematic

Control Panel Schematic

Parameter

Model

| Rating Voltage| Frequency| Motor Power| Maximum Capacity|

Rotating Speed

---|---|---|---|---|---

**** NY-8668MJA

| 120V| 60HZ| 1450W| 2.0L|

**** 35000rpm

Before using this Machine for the first time

Please check whether all accessories are available and Machine is intact.Then add 1000ml of water to the jug and clean the jug one or two times according to the operating instructions and pour out the water.

WARNING: The blade is very sharp, please handle it carefully.

Note: The Machine has protection function of lid shift. Blender Machine doesn’t work once lid doesn’t cover jug properly

Function Operating Instructions

1. Choose ON/OFF. Plug in the power, the lights are all on. Machine detects hall automatically by scanning in a circle.
2. Choose ICE CRUSH. The program of ICE CRUSH starts to work after 2 seconds. When ICE CRUSH working, choose other programs, they won’t work. ICE CRUSH not work when returns to ON/OFF.
3. Choose SMOOTHIE. The program of SMOOTHIE starts to work after 2 seconds. When SMOOTHIE working, choose other programs, they won’t work. SMOOTHIE not work when returns to ON/OFF.
4. Choose GRIND. The program of GRIND starts to work after 2 seconds. When GRIND working, choose other programs, they won’t work. GRIND not work when returns to ON/OFF.
5. Choose speed level 1,2,3,4. Program starts to work. Speed 1,2,3,4 can be adjusted in program working condition.
6. Choose PULSE, program starts work. PULSE not work when returns to ON/OFF.

Operating Instructions

1. Please place the Machine on a flat surface and make sure that the power cord is plugged into a power outlet.

2. Make sure that the Jug covers the lid properly and Machine is in standby condition.
   (Please note that place jug on the housing base steadily and cover the lid to prevent high speed rotating water from spilling out.)

3. Add appropriate water and food according to recipe.( Maximum capacity for food and water not exceeds 2000ml.)

4. Turn on the power, the lights of the Machine are all on. Turn to the ON/OFF, rotate knob to the corresponding function position, program works by default. After this function finish working, all lights are on. Next operation will not continue until knob turns to ON/OFF again.

5. Food in jug will not be taken out until machine stops. (add condiments according to personal preference.)

Machine Maintenance

1. Before cleaning the Machine, be sure to unplug the power plug.
2. Clean the Machine and other parts immediately after use.
3. Wipe the Machine with a wet cloth.
4. After each use and when the idle time exceeds ten minutes, please clean the jug promptly.
5. Before storing the Machine, make sure it is clean and dry.
6. If don’t use the Machine for a long time, please pull the power plug out of the socket. Keep Machine away from dust and insect.

Simple Troubleshooting and solutions

Status

| Cause|

Solutions

---|---|---
Machine not work| Power isn’t on. Plug not put in socket or loose in socket.| Check Plug in socket firmly.
Lid not match jug properly.

Jug not stand on housing base properly.

| Check if lid matches jug

Properly and jug stands on housing base.

Over vibration| Machine not stand well| Put Machine on the horizontal surface.
Jug not stand well on housing base.| Make sure jug stands on housing base firmly.
There is a little gas Bubble overflow from Transparent refilling| Too many Ingredients| Please follow IM or recipe to operate the Machine.
Too many water| Please follow IM or recipe to operate the Machine.
Blades not spin| Connector on motor might be loose likely.| Screw tight the connector.
Loud noise| Machine on working table not on horizontal.| Put the Machine on the horizontal surface.

Warranty Card

Model number

|  |

Machine Code

|
---|---|---|---

Invoice number

|  |

Purchase Date

|

Customer name

|  |

Tel. number

|

Address

|
 |

Thank you for purchasing our Machine. This Machine is a well-designed home appliance that is made of high quality components. It will bring great convenience to your life. If the Machine fails, please contact the company in time. Contact after-sales service center, we will provide you with good maintenance services

The Machine is guaranteed for one year from the date of purchase.
During the warranty period, all parts damaged due to Machine quality problems can be replaced and repaired

Whenever the warranty period is exceeded, maintenance fees and part fees will be charged as appropriately.

This form is filled out by the “maintenance department” after repairs, and the customer is requested to save it.

Registration form of maintenance, replacement of parts

Model Number

|  |

Machine Code

|
---|---|---|---

Invoice Number

|  |

Purchase Date

|

Customer  Name

|  |

TEL: number

|

Address

|

Series Number

|

Warranty Item

|

Name of parts replacement

|

Quantity

|

Maintenance charge

|

Maintenance man signature

|

Date

---|---|---|---|---|---|---
 |  |  |  |  |  |
 |  |  |  |  |  |
 |  |  |  |  |  |
 |  |  |  |  |  |
 |  |  |  |  |  |

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>