Shenzhen Yunlan Technology D10759-2 Souing 360 Degree Smart following Shot Tripod Head User Manual
- June 5, 2024
- Shenzhen Yunlan Technology
Table of Contents
Shenzhen Yunlan Technology D10759-2 Souing 360 Degree Smart following
Shot Tripod Head
Welcome to use SOUING 360 Degree Smart following Shot Tripod Head Open application market of the mobile phone and search: SOUING
Introduction to main functions
- Control smart photographing and videoing of the mobile phone
- Object tracking
- Human face tracking
- Beauty selfies
Instructions:
Description of power on
- Power on: at the power-off state, hold down the key for 3 seconds and the device powers on. The blue light flashes and the green light is on normally；
- Power off: at the power-on state, hold down the key for 3 seconds and the device powers off and the light goes out.
Note: When the battery voltage is tested to drop to 3.5V, it powers off after the green light and blue light flash quickly for 10 seconds.
Description for connection
- The blue light flashes after power on and the device is at the state waiting for the blue connection.
- Open Bluetooth of the mobile phone and open APP. There is no need to make manual pairing. The device connects with APP successfully after 3-6 seconds and the blue light is on normally.
Smart shot
A. Face tracking mode
- Following shot: make a pose and keep it for 3 seconds to start photographing automatically.
- Following video: make a pose and keep it for 3 seconds to start videoing automatically.
- Dual mode: two human faces approach and keep for 3 seconds to start photographing automatically.
B. Following shot of objects
Following shot: make double clicks on the selected objects in camera
interface. It starts photographing automatically after 3 seconds.
Following video: make double clicks on the selected objects in camera
interface and click video to start following video.
Status of the indicator light
- The green light flashes twice when photographing and keeps flashing when videoing and is on normally at standby state.
- The device powers on automatically when it is connected to charge. The red light is on normally when charging and is off after full charging.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used i n portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>