ANKER RoboVac User Guide
- June 7, 2024
- Anker
Table of Contents
ANKER RoboVac User Guide
Using Your RoboVac
Remove the sticker next to the power switch, and the foam blocks beside the
bumper before use.
- Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
- When the Charging Base connects to AC power, the LED indicator on the Charging Base is SOLID WHITE.
Fully charge RoboVac before use. The LED indicator on RoboVac breathes orange
while charging, and is solid blue when fully charged.
Download the EufyHome app and follow the instructions in the app to complete
the Wi-Fi connection. Then you can control RoboVac via this app. Refer to the
Owner’s Manual for details.
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
-
Remove power cords and small objects from the floor that may entangle RoboVac. You can use the supplied cable ties to organize your wires and power cords.
-
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very darkcolored rugs or high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to malfunction.
-
Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac from getting stuck. If necessary, place a physical barrier to block off the problem areas.
-
Keep RoboVac away from wet areas.
-
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible.
-
To keep RoboVac away from any area or item you do not want RoboVac to clean, apply the Boundary Strip(s) on the floor with adhesive tape to create a virtual barrier. Make sure the strips are placed FLAT on the floor.
Place physical barriers or Boundary Strips in front of fireplaces and areas
that may cause damage to RoboVac if entered.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>