CHICAGO FAUCETS Single Lever Hot and Cold Water Mixing Sink Faucet 2300-8ABCP User Manual
- June 7, 2024
- CHICAGO FAUCETS
Table of Contents
CHICAGO FAUCETS Single Lever Hot and Cold Water Mixing Sink Faucet
2300-8ABCP User Manual
Product Type
Deck Mounted 8″ Fixed Centers Single Lever Hot and Cold WaterMixing Sink Faucet
Features & Specifications
- 8″ Fixed Centers
- 2.2 GPM (8.3 L/min) Aerator
- 4-5/8″ Lever Handle
- Ceramic Volume Control and Hot Water Limit Stop Cartridge
- 3/8″ Compression Flexible Stainless Steel Supply Hoses
- 10″ Center to Center Integral Cast Brass Swing Spout
- ECAST® design provides durable construction with total lead content equal to or less than 0.25% by weighted average
- CFNow! Item Ships in 3 Days
Performance Specification
- Rated Operating Pressure: 20-125 PSI
- Rated Operating Temperature: 40-140ºF
Warranty
- Lifetime Limited Faucet Warranty
- 5-Year Limited Cartridge Warranty
- 1-Year Limited Finish Warranty
Codes & Standards
- ASME A112.18.1/CSA B125.1
- California Health and Safety Code 116875 (AB1953-2006)
- Vermont Bill S.152
- NSF/ANSI 372 Low Lead Content
- ADA ANSI/ICC A117.1
Architect/Engineer Specification
Chicago Faucets No. 2300-8ABCP, Sink Faucet for hot and cold water, single
lever, deck-mounted with 8″ fixed centers, chrome plated. Integral, cast
brass, swing spout, 10″ center-to-center. 2.2 GPM (8.3 L/min) pressure
compensating Softflo aerator. 4-5/8″ metal lever handle with blue-and-red
temperature indicator. Ceramic quarter-turn cartridge, features square,
tapered stem. Flexible stainless steel supply hoses with 3/8″ compression
fitting. ECAST® construction with less than 0.25% lead content by weighted
average. This product meets ADA ANSI/ICC A117.1 requirements and is tested and
certified to industry standards: ASME A112.18.1/CSA B125.1, California Health
and Safety Code 116875 (AB1953-2006), Vermont Bill S.152, and NSF/ANSI 372 Low
Lead Content. This product meets ADA ANSI/ICC A117.1 requirements and is
tested and certified to industry standards: ASME A112.18.1/CSA B125.1,
California Health and Safety Code 116875 (AB1953-2006), Vermont Bill S.152,
and NSF/ANSI 372 Low Lead Content.
Operation and Maintenance
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>