SIIG Dual Head Full HD HDMI Video Docking Station User Manual

SIIG Dual Head Full HD HDMI Video

 _ **Docking Station User Manual**_

Features

• Support USB 3.0 SG speed connection between host and docking station.
• Support USB 2.0 type-A port x4, support 480Mbps speed and SV/S00mA power output
• Support USB 3.0 type-A port x2, support SGbps speed and 5V/900mA power output (USB 3.0 the same as USB 3.1 Gen1 or USB 3.2 Gen1)
• Support two Displaylink HDMI output
• Displaylink video output resolution up to 1080p@60Hz
• Displaylink video output support PCM 2.0ch and 5.1 ch audio
• Support Ethernet 10/100/1 0O0Mbps
• Support 3.5mm Headset jack

Package contents

• Dual Full HD video docking station
• Power adapter DC 12V / 2A
• USB 3.0 Type B to Type-A cable
• Driver CD
• User Manual

System requirements

• Host computer system with an available USB 3.0 Type-A port
• Windows® 10 / 8 .1 / 8 / 7 (32/64 bit)
• Mac OS X® 10.10 to 10.13.3, 10.14, 10.15

Operating system requirements are subject to change. For the latest requirements, please visit www.siig.com and search JU- DK0L11-1
Note: If you connect the docking station to a USB 2.0 host port or use a USB 2.0 cable, performance will be limited.

Front View

1. Power LED:
   keep shining when power on

2. use 3.0 ports:
   USB 3.0 Type-A port support USB UASP mode, 5Gbps speed and 5V/900mA power output. connect for USB peripherals

3. 3.5mm headset jack:
   connect to headset (include audio and microphone)

Rear View

1. Power jack:
   Connect the Power Adapter to the DC Power Input Port on the Docking Station. DC 12V/2A

2. use 3.0 Type-B host:
   Connect to USB 3.0 Type-A port of system via include USB 3.0 Type B to Type-A cable.

3. Displaylink HDMI video output 2
   This video output via Displaylink chip Connect to display. Resolution up to 1080p@60Hz

4. Displaylink HDMI video output 1
   This video output via Displaylink chip Connect to display. Resolution up to 1080p@60Hz

5. RJ-45 Gigabit Ethernet port
   connect to ethernet router or switch (Support 1000/100/10 Mbps)

6. use 2.0 ports:
   USB 2.0 Type-A port support 480Mbps speed and SV/S00mA power output. connect for USB peripherals

Displaylink driver installation

• “Displaylink” driver is required
• Without Displaylink driver install, Displaylink video output 1 & 2 can not output video.
• For Mac OS X® 10.13.4 to 10.13.6, Please check Displaylink website for driver update and notes http://www.displaylink.com/downloads/macos

1. Please find the driver in driver CD or download from SIIG website
2. Follow the screen instructions to complete the installation and restart your PC/NB (For Mac OS® 10.13.3 and the above, the system would display a “System Extension Blocked” warning while driver installing. Please allow “Displaylink Corp” at Security & Privacy setting.)
3. For Displaylink configuration, please search & refer to Support document on Displaylink website https://support.displaylink.com/

Windows
How to configure Displaylink displays on Windows

MAC
How to configure Displaylink displays on Mac OS X

Allow “Displaylink” app on Mac

Open Security Preference while driver installing

Allow “Displaylink Corp” app

Supported Display resolution

Q&A

• Why Displaylink output has no video?
  Ensure the Displaylink driver have installed.

• Why play video on Displaylink output will have latency or cause CPU heavy loading?
  Displaylink outputs are kind of USB video extend via Displaylink chip which needs extra CPU computing.

Dear Valued Customer
WE REALLY
APPRECIATE
YOUR PURCHASE
-thank you-

Support

For more info or tech support
http://www.siig.com/support

June, 2020 Copyright© 2020 by SIIG, Inc. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>