SAMSUNG AirDresser User Guide
- June 7, 2024
- Samsung
Table of Contents
AirDresser Quick Start Guide
Three simple steps to refreshing with AirDresser:
Please refer to AirDresser User Manual for acceptable fabric types.
- Slide out Air Hanger, place garment(s) on Air Hanger, slide back into place. (See below to learn how to use Accessory Rack or Built-In Shelf.)
- Fill the water reservoir tank, located on the bottom right of AirDresser. (Remember to empty the drain tank when full.) See below for more information.
- Choose the appropriate cycle. See the reverse side of this guide (page 2).
Air Hangers
Your AirDresser comes with three Air Hangers.
A. Simply remove an Air Hanger from the system and use as a regular hanger.
B. To use your own hanger, simply remove an Air
Hanger from the system and replace it with the adaptable Regular Hanging Kit.
Water Reservoirs
The refillable, self-contained water reservoirs require no plumbing or water
line.
A. First, fill the right reservoir (Refill Tank) with water.
B. When the discharge tank on the left (Drain Tank) is full, discard the water
and refill the right reservoir.
Accessory Rack
Use the Accessory Rack to conveniently hang items like scarves and ties.
A. Accessories can be hung from the bottom rung and flipped over the top.
B. Alternatively, items can be hung from the top rung and secured behind the
bottom rung.
Built-in Shelf
Perfect for items that can’t be hung, like hats, sweaters, and toys.
A. Remove the Built-In Shelf from the inside of the AirDresser door.
B. Slide the Built-
In Shelf into the track in the center of the AirDresser so that it lays flat.
Weight Kit for
Pants The Weight Kit is designed to efficiently relax wrinkles from pants.
A. Hang pants upside down on an Air Hanger, clipping the legs.
B. Remove the Weight Kit from the Accessory Rack and attach to the waistband.
Air Fitter
The Air Filter captures and eliminates particles from your garments. Remove
and clean the Air Filter periodically.
Fresh Finish™
Insert your favorite dryer sheet for a laundry-fresh scent:
*The strength of the scent may differ depending on the dryer sheet used, and the scent may remain inside the AirDresser alter the cleaning cede is complete.
Lint Filter
The Lint Filter captures and eliminates loose fibers from your garments.
Remove and clean periodically.
Smart Access
Use the SmartThings app to control your AirDresser remotely. • Start or pause
a cycle • Cycle recommendations • End-of-cycle notification
SmartThings
- Eliminates 99.9% of bacteria (E. coil and S. aureus) using a Sanitize course. Verified by Intertek; individual results may vary.
** Available after downloading the cycle from the SmartThings App.
Touch Display
Displays the selected cycle and estimated time remaining, notifications, and Wi-Fi connectivity.
- Cycle: Choose from General, Sanitize, Dry or Special
- Silent: Turn on for quiet use 3. Child Lock: Tap and hold for
- seconds to deactivate all buttons except power
- Delay End/Keep Fresh: Tap and hold for 3 seconds for items you do not wish to remove at the end of the cycle or to increase the end time
- Smart Control: Connects to the SmartThings app
- Power: Turn on or off
- Start/Pause: Tap and hold to start. Tap to pause.
For more information, please refer to AirDresser user manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>