Saramonic Blink 800 Digital Wireless Microphone System User Manual
- June 7, 2024
- Saramonic
Table of Contents
5.8 GHz Digital Wireless
Microphone System
Blink800
User Manual
General Introduction
The Saramonic Blink800 is a versatile and easy-to-use 5.8 GHz wireless microphone system that delivers detailed, broadcast-quality sound. There are three kinds of kits available in the Blink800 system, including B1 (TX-35+ RX-35), Blink800 B2 (TX-XLR+RX-XLR), and Blink800 B3 (TX-635+RX-635). Kit components are all constructed of durable metal and fully compatible with other Blink800 wireless system components for added systern expand-ability.
| Model | In the box |
|---|---|
| Blink800 B1(TX-35+RX-35) | 1xTX-35 |
1xRX-35
Blink800 B2(TX-XLR+RX-XLR)| 1xTX-XLR
1xRX-XLR
Blink800 83(TX-635+RX-635)| 1xTX-635
1xRX-635
BlinkBOO TX-35| 1xTK38
Blink800 RX-35| 1xRX-35
Blink800 TX-XLR| 1xTX-XLR
BlinkBOO RX-XLR| 1xRX-XLR
Blink800 TX-635| 1xTX-635
Blink800 RX-635| 1xRX-635
Blink800 B1(TX-35+RX-35)
Introduction
The Saramonic Blink800 B1 is a 5.8 GHz durable metal wireless lavalier system
that delivers detailed, crystal clear sound. With the 3.5mm TRS audio output
cable, it is compatible with DSLRs, mirrorless cameras, camcorders, recorders,
and more. The Blink800 system is designed to automatically avoid interference
for hassle-free and reliable sound performance.
Product Structure
- 3.5mm input transmitter Blink800 TX-35
(1) Power and Pairing
Indicator
Power Functions:
Flashing Red Light=Low Battery
Pairing Functions:
Flashing Blue Light (every 1 second)=Unpaired
Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
Solid Blue Light=Paired Successfully
Note: if the transmission signal is poor, please follow the steps below
to select a different channel until you get a clear sound.
Quickly press the power button of TX-35 to select the channel. Once the
receiver and transmitter are paired, they will be connected automatically on
the same channel, even when powered off and on. (Red light flashing
once=Channel! 1, Red light flashing twice=Channel 2, Red light flashing three
times=Chan-nel 3, Red light flashing four times=Channel 4)
(2) Pair Button
(3) Power Button
Long press to turn on or off the transmitter.
(4) MIC IN jack (3.5mm TRS locking input jack)
(5) USB Type-C Charging Port
(6) Charge Indicator
Solid Red Light=Charging
Light turns off = Fully Charged
(7) Built-in Antenna
Note: Be careful to avoid violent collisions to antenna.
- 3.5mm output receiver Blink800 RX-35
(1) Power and Pairing
Indicator
Power Functions:
Flashing Red Light=Low Battery
Pairing Functions:
Flashing Blue Light (every 1 second)=Unpaired
Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
Solid Blue Light=Paired Successfully
Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.
(2) Pair Button
(3) Power Button
Long press to turn on or off the receiver.
(4) OUTPUT jack (3.Smm TRS locking output jack)
(5) USB Type-C Charging Port
(6) Charge Indicator
Solid Red Light=Charging Battery
Light turns off = Fully Charged
(7) Built-In Internal Antenna
Note: Be careful to avoid violent collisions to antenna. if the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times=Channel 4)
Quick Setup Guide (Blink800 B1)
-
Attach the belt clip to the TX-35
(1) Press the TX-35 down fitting into the horizontal groove on the belt clip.
(2) Attach the TX-35 into the place according to the shown icon of groove.
Please repeat the above steps for attaching the adapter to RX-35. -
Connect the supplied lavalier to the MIC IN jack of TX-35
(1) Plug the supplied lavalier microphone into the MIC
(2) For a secure connection, turn to lock the connector.
-
Attach the shoe mount to the RX-35
(1) Push the RX-35 down fitting into the horizontal groove on the cold shoe mount.
(2) Slide the RX-35’s cold shoe mount onto camera’s shoe mount.
(3) Plug the supplied
3.5mm TRS to TRS output cable into the OUTPUT jack of RX-35 and then into
camera’s mic input.
Note: Please make sure the transmitter and receiver pairing has been completed.
Blink800 B2 (TX-XLR+RX-XLR)
Introduction
The Saramonic Blink800 B2 is a 5.8GHz durable metal wireless system for
delivering detailed, crystal clear sound during recording. With the XLR output
connector, it is compatible with instruments, dynamic & self-powered
microphone, and other XLR devices. It is fully compatible with other Blink800
wireless system components for added system expandability.
Product Structure
-
XLR input transmitter Blink800 TX-XLR
(1) Power and Pairing
Indicator
Power Functions:
Flashing Red Light=Low Battery
Pairing Functions:
Flashing Blue Light (every 1 second)}=Unpaired
Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
Solid Blue Light=Paired Successfully
Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.
Note: If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound.
Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times=Channel 4)
(1) Pair Button
(2) Power Button
Long press to turn on or off the transmitter.
(3) XLR output connector
(4) USB Type-C Charging Port
(5) Charge Indicator
Solid Red Light=Charging Battery
Light turns off = Fully Charged
(6) Built-in Antenna
Note: Be careful to avoid violent collisions to antenna. -
XLR output receiver Blink800 RX-XLR
(1) Power and Pairing
Indicator
Power Functions:
Flashing Red Light=Low Battery
Pairing Functions:
Flashing Blue Light (every 1 second}=Unpaired
Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
Solid Blue Light=Paired Successfully
Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.
(2) Pair Button
(3) Power Button
Long press to turn on or off the receiver.
(4) XLR output connector
(5) USB Type-C Charging Port
(6) Charge Indicator
Solid Red Light=Charging Battery
Light turns off = Fully Charged
(7) Built-In Internal Antenna
Note: Be careful to avoid violent collisions to antenna.
Quick Setup Guide (Blink800 B2)
-
Attach the Blink800 TX-XLR transmitter to dynamic microphone, self-powered microphone, or other XLR audio output device.
Pushing in the microphone or XLR male audio output into the XLR female input of Blink800 TX-XLR until it clicks into place.
Note: Please turn off the transmitter before attaching or removing the microphone. -
Attach the Blink800 RX-XLR receiver to the video camera, mixer, recorder, or other XLR input device.
Note: Please make sure the transmitter and receiver pairing has been completed.
Blink800 B3 (TX-635+RX-635)
Introduction
The Saramonic Blink800 B3 is a 5.8GHz durable metal wireless guitar and
instrument system that delivers detailed, crystal clear sound. With the
6.35mm audio output connector, it wirelessly transmits guitars, keyboards and
other instruments to amplifiers, pedal boards, mixers and more. It is fully
compatible with other
Blink800 wireless system components for added system expandability.
Product Structure
-
6.35mm input transmitter Blink800 TX-635
(1) Power and Pairing
Indicator
Power Functions:
Flashing Red Light=Low Battery
Pairing Functions:
Flashing Blue Light (every 1 second)=Unpaired
Quick Flashing Blue Light (every 0.5 second)=Waiting for Paring
Solid Blue Light=Paired Successfully
Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.
Note: If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound.
Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times=Channel 4)
(2) Pair Button
(3) Power Button
Long press to turn on or off the transmitter.
(4) 6.35mm output connector
(5) USB Type-C Charging Port
(6) Charge Indicator
Solid Red Light=Charging
Light turns off = Fully Charged
(7) Built-in Antenna
Note: Be careful to avoid violent collisions to antenna. -
6.35mm output receiver Blink800 RX-635
(1) Power and Pairing
Indicator
Power Functions:
Flashing Red Light=Low Battery
Pairing Functions:
Flashing Blue Light (every 1 second)=Unpaired
Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
Solid Blue Light=Paired Successfully
Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.
(2) Pair Button
(3) Power Button
Long press to turn on or off the receiver .
(4) 6.35mm output connector
(5) USB Type-C Charging Port
(6) Charge Indicator
Solid Red Light=Charging Battery
Light turns off = Fully Charged
(7) Built-In Internal Antenna
Note: Be careful to avoid violent collisions to antenna.
Quick Setup Guide (Blink800 B3)
- Attach the Blink800 TX-635 transmitter to instrument, or any 6.35mm output device.
- Attach the Blink800 RX-635 receiver to the mixer, recorder, pedalboard, guitar amplifier etc.
Note: Please make
sure the transmitter and receiver pairing has been completed.
Operation Guide
For the Blink800 B1 kit
-
Turn on the TX-35 transmitter and RX-35 receiver.
-
The transmitter and receiver have been paird successfully before leaving the factory.
Note: if the transmitter and receiver are disconnected, please follow the steps below to connect them manually.
Press the pair button of receiver and transmitter simultaneously and hold for 3 seconds, the indicators of receiver and transmitter shoul be quick flash at every 0.5 seconds waiting for pairing. The pairing mode off when you have not operate the receiver or transmiter for 20 seconds. -
When pairing success, the indicators of transmitter and receiver are solid blue.
Note:
(1) To pair a second receiver RX, just repeat the step 2. (Receivers only can receive one transmitter at a time.
Transmitters can transmit to up to 4 receivers simultaneously.)
(2) If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on.
(Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times=Channel -
Connect the supplied lavalier to the MIC IN jack of TX-35 transmitter.
-
Connect the RX-35 receiver to the mic jack of a camera, camcorder, recorder with the supplied 3.5mm TRS audio cable.
-
You are ready to record.
For the Blink800 B2 kit
-
Turn on the TX-XLR transmitter and RX-XLR receiver.
-
The transmitter and receiver have been paird successfully before leaving the factory.
Note: If the transmitter and receiver are disconnected, please follow the steps below to connect them manually. Press the pair button of receiver and transmitter simultaneously and hold for 3 seconds, the indicators of receiver and transmitter shoul be quick flash at every 0.5 seconds waiting for pairing. The pairing mode off when you have not operate the receiver or transmiter for 20 seconds. -
When pairing success, the indicators of transmitter and receiver are solid blue.
Note:
(1) To pair a second receiver RX, just repeat the step 2. (Receivers only can receive one transmitter at a time. Transmitters can transmit to up to 4 receivers simultane ously).
(2) If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on.
(Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four imes=Channel
For the Blink800 B3 kit
-
Turn on the TX-635 transmitter and RX-635 receiver.
-
The transmitter and receiver have been paird successfully before leaving the factory.
Note: If the transmitter and receiver are disconnected, please follow the steps below to connect them manually. Press the pair button of receiver and transmitter simultaneously and hold for 3 seconds, the indicators of receiver and transmitter shoul be quick flash at every 0.5 seconds waiting for pairing. The pairing mode off when you have not operate the receiver or transmiter for 20 seconds. -
When pairing success, the indicators of transmitter and receiver are solid blue.
Note:
(1) To pair a second receiver RX, just repeat the step 2. (Receivers only can receive one transmitter at a time. Transmitters can transmit to up to 4 receivers simultane ously).
(2) If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on.
(Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times=Channel -
Attach the Blink800 TX-635 transmitter to instrument, or any 6.35mm output device.
-
Attach the Blink800 RX-635 receiver to the mixer, recorder, pedalboard, guitar amplifier, etc.
-
You are ready to record,
Specification
RX-35
| Wireless Transmission | Digital 5.8GHz |
|---|---|
| Modulation | GFSK |
| Frequency Response | 20Hz to 20kHz |
| Operating Range | Up-to 60m (196,85’) without obstacles |
| Output | Gold-plated locking 3.5mm jack |
| Audio output level | -60 dBV |
| Audio latency | ≤4ms |
| Power Requirements | Buiit-in battery orl USB-C DC SV |
| Antenna | PIFA antenna |
| Built-In Battery Life | Approx. 6 hours |
| Dimensions | 109.59x28x29.56mm |
| Weight | RX: 92g (3.2 oz.) |
| Operating temperature | O°C to SO°C |
| Storage temperature | -20°C to +55°C, |
TX-35
| Wireless Transmission | Digital 5.8GHz |
|---|---|
| Modulation | GSK |
| Frequency Response | 20Hz to 20kHz |
| Operating Range | Up-to 60m (196.85) without obstacles |
| Input | Gold-plated locking 3.5mm jack |
| RF Output Power | Smw |
| Audio latency | sams |
| Maximum SPL | Lavalier Microphone: 110dB SPL |
| Sensitivity | Lavalier Microphone: -30d8 |
| SNR | >720B |
| Power Requirements | Built-in battery or USB-C DC SV |
| Antenna | PIFA antenna |
| Built-In Battery Life | Approx. 6 hours: |
| Dimensions 7 | 109.59x28x29.S6mm |
| Weight | TX: 92g (3.2.02.} |
| Operating temperature | O°C to 50°C |
| Storage temperature | -20°C to +55°C |
RX-XLR
| Wireless Transmission | Digital 5.8GHz |
|---|---|
| Modulation | GFSK |
| Frequency Response | 20Hz to 20kHz |
| Operating Range | Up-to 60m (196.85″) without obstacles |
| Output | KR eee ee |
| ‘Audio output level | -60 dBV |
| Audio latency | ≤4ms |
| Power Requirements | Built-in battery or USB-C DC 5V |
| Antenna | PIFA antenna |
| Built-In Battery Life | ; Approx. 6 hours |
| Dimensions | 114.32128129.Somm |
| Weight | RX: 95g (3.03 oz.) |
| Operating temperature | O°C to 50°C |
| Storage temperature | -20°C to +55°C |
TX-XLR
| Wireless Transmission | Digital 5.8GHz |
|---|---|
| Modulation | -GFSK |
| Frequency Response | 20Hz to 20kHz |
| Operating Range | Up-to 60m (196.85) without obstacles |
| Input | XLR |
| RF Output Power | 5mW |
| Audio latency | ≤4ms |
| SNR | >72dB |
| Power Requirements | Built-in battery or USB-C OC SV |
| Antenna | : PIFA antenna |
| Built-in Battery Life | Approx. 6 hours |
| Dimensions : | 414.32x28x29.56mm |
| Weight | TX: 98g (3.4 02.) |
| Operating temperature | O°C to 50°C |
| Storage temperature | -20°C to +55°C |
RX-635
| Wireless Transmission | Digital 5.8GHz |
|---|---|
| Modulation | GFSK |
| Frequency Response | 20Hz to 20kHz |
| Operating Range | Up-to 60m (196.85) without obstacles |
| Output | Gold-plated 635mm connector |
| Audio output level | -60 dBV |
| Audio latency | ≤4ms |
| Power Requirements | Built-in battery or USB-C DC SV |
| Antenna | PIFA antenna |
| Built-In Battery Life | Approx. 6 hours |
| Dimensions | 152.2x28x29.56rnen |
| Weight | RX: 88g (3.1 oz.) |
| Operating temperatura | O°C to 50°C |
| Storage temperature | -20°C to +55°C |
TX-635
| Wireless Transmission | Digital 5.8 GHz |
|---|---|
| Modulation | GFSK |
| Frequency Response | 20Hz to. 20kHz / |
| Operating Range | Up-to 60m (196.85) without obstacles |
| Input 7 | Goid-plated 6.35mm Connector |
| RF Output Power | SmW |
| Audio latency | ≤4ms |
| SNR | >72B |
| Power Requirements | Built-in battery or USB-C DC SV |
| Antenna | PIFA antemna |
| Built-In Battery Life | Approx. 6 hours |
| Dimensions | 152.2x28x29.56mm |
| Weight | TX: 88g (3.1 oz.) |
| Operating temperature | O°C to SO°C |
| Storage temperature | -20°C to + 55°C |
Packing List
Packing list
Blink800 RX-35
1xBlink800 RX-35 Receiver
1xDetachable Cold Shoe Adapter for RX-35
1×1‘ (30.5cm) 3.5mm TRS to TRS Output Cable for Camera
1×1’ (30.Sem) USB-C to USB-A Charging Cable
1xWarranty Card
1xUser Manual
Blink800 TX-35
1xBlink800 TX-35 Transmitter
1xOK3A Omnidirectional Lavalier Microphone
1xPlastic Belt-Clip Mounting Plate for TX-35
1×1′(30.5cm) USB-C to USB-A Charging Cable
1xWarranty Card
1xUser Manual
Blink800 RX-XLR
1xBlink800 RX-XLR Receiver
1×1’ (30.5cm) USB-C to USB-A Charging Cable
1×1.1′(35cm)XLR Cable
1*xWarranty Card
1xUser Manual
Blink800 TX-XLR
1xBlink800 TX-XLR Transmitter
1×1‘ (30.5em) USB-C to USB-A Charging Cable
1*1.1′(35cm)XLR Cable
1xWarranty Card
1xUser Manual
Blink8O0 RX-635
1xBlink800 RX-635 Receiver
1×1‘ (30.S5cm) USB-C to USB-A Charging Cable
1xWarranty Card
1xUser Manual
Blink800 TX-635
1xBlink800 TX-635 Transmitter
1×1‘ (30.5cm) USB-C to USB-A Charging Cable
1×2′(60cm) 6.35mm extension cable
1xWarranty Card
1xUser Manual
Blink800 B1 (TX-354+RX-35)
1xBlink800 RX-35 Receiver
1xBlink800 TX-35 Transmitter
1xDetachable Cold Shoe Adapter for RX-35
1xPlastic Belt-Clip Mounting Plate for TX-35
1xDK3A Omnidirectional Lavalier Microphone
1×1′(30.5cm) 3.5mm TRS to TRS Output Cable for Camera
2×1′ (30.Scm) USB-C te USB-A Charging Cable
1xWarranty Card
1xUser Manual
Blink800 B2 (TX-XLR+RX-XLR)
1xBlink800 RX-XLR Receiver
1xBlink800 TX-XLR Transmitter
2×1′(30.5em) USB-C to USB-A Charging Cable
2*1.1′ (35em)XLR Cable
1xWarranty Card
1xUser Manual
Blink800 B3 (TX-635+RX-635)
1xBlink800 RX-635 Receiver
1xBlink800 TX-635 Transmitter
1*2′(60cm) 6.35mm extension cable
21′(30.5em) USB-C to USB-A Charging Cable
1xWarranty Card
1xUser Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>