Saramonic SR-MLP4 Voice Recorder Pen User Manual
- June 7, 2024
- Saramonic
Table of Contents
SR-MLP4 Voice Recorder Pen
SR-MLP4
Operating guide
- Long press the OFF/ON button for 2 seconds to turn on the unit, the LED indicator is solid red.
- Press the OFF/ON button to start recording. In recording mode, the LED indicator flashes alternately in red and green light. ( If you want to use the flashlight on top of the unit, double press the OFF/ON button to turn it on/off. Also, it allows to function recording and flashlight simultaneously.)
- Short press the OFF/ON button once to stop recording, the LED indicator is solid red.
- Long press the OFF/ON button again for 2 seconds to turn off the unit, the LED indicator will go off.
- Transfer files to computer. Plug the USB cable to the unit and connect to the computer, then turn on the unit, it will enter the USB storage mode. Press the OFF/ON button again for 2 seconds to complete data transmission. When the power indicator is off, the USB cable can be pulled out.
- Charge the unit via the USB interface. Quick Flashing Red Light: the unit is in low battery. (The unit will save data automatically to memory card while the battery is low or before the power is off. ) Solid Green: the unit is charging (It allows to function recording while charging.) LED indicator turns off: fully charged.
- Built-in SD memory card(8GB) Built-in SD memory card(8GB) has advantages of long recording time. With the remain memory storage runs out, the unit is unable to record a new audio data. The LED indicator is solid red.
Highlights
- A Pen with Voice Recorder and Flashlight
- For Covert Audio Surveillance
- 8GB Internal Storage
- Powered by Rechargeable Battery
- 4 Hours of Continuous Recording
- Built-in USB Connector to Download Files
Packing list
- SR-MLP4
- USB cable
- User manual
- Warranty card
Specifications
Recording Media
|
Built-in TransFlash card (8GB)
---|---
USB Type-C/F
|
IN voltage range MIN 3.5V, MAX 28V； IN operating voltage range, restricted by VDPM and VOVP MIN 4.45V, MAX 6.45V
Record WAV
|
16kHz/16bit
USB
|
Write speed 300KB/S,
Read speed 400KB/S
LED light
|
0.1W; 15LM
Battery
|
170mAh Built-in rechargeable battery
Operating time
|
Only recording: 4 hours Only LED lighting: 5 hours Both recording and lighting: 2 hours
Material
|
Stainless steel
Dimensions
|
φ15.5*140mm
Weight
|
107g (3.77oz)
Specifications
-
LED light
-
Microphone
-
LED indicator
-
OFF/ON button
-
USB Type-C port
(For charging and data transmission) -
Pen switch
www.saramonic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>