PYLE SERVEIL PLDVRCAMAND75 Wireless Android Dashcam GPS Navigation Kit User Manual
- June 7, 2024
- Pyle
Table of Contents
SERVEIL PLDVRCAMAND75 Wireless Android Dashcam GPS Navigation Kit
PLDVRCAMAND75
Wireless Android Dashcam GPS Navigation Kit
Wireless Bluetooth Android Dashcam GPS Navigation Device Data Recorder
Before using this product , be sure to read and fully understand the following
safety information: · Do not operate the product while driving, if doing so
will divert your
attention in any way from the safe operation of your vehicle. Always observe
safe driving rules and follow all existing traffic regulations. If you
experience difficulty in operating this product or reading the display, park
your vehicle in a safe location and apply the parking brake before making the
necessary adjustments. · The company is not accountable for any issues or
problems due to the illegal use of this product. · The driver is prohibited to
use the product including: radio, Bluetooth at gas station. · The seller is
not legally authorized to carry out the installation or removal of the
product. The company shall not take any responsibility for any consequences
resulting from the self – opening of the product. · The company shall not take
any responsibility for any consequences resulting from unboxing the product.
www.PyleUSA.com
1
CONTENTS Note that matters
……………………………………………………………………………………………………………………………………………………. 3 Product Overview
……………………………………………………………………………………………………………………………………………………. 4 Basic Function
…………………………………………………………………………………………………………………………………………………………….. 4 Quick Guide
………………………………………………………………………………………………………………………………………………………………….. 7 System Main
Interface ……………………………………………………………………………………………………………………………………….. 8 Navigation
……………………………………………………………………………………………………………………………………………………………………… 8 Frequency
Modulation (FM) Launch ……………………………………………………………………………………………………. 8 Bluetooth
Phone …………………………………………………………………………………………………………………………………………………….. 8 Traffic
Video (DVR) ………………………………………………………………………………………………………………………………………………… 9 Setting
………………………………………………………………………………………………………………………………………………………………………………. 9 Voice
Command ………………………………………………………………………………………………………………………………………………….. 12
Multimedia Entertainment ……………………………………………………………………………………………………………………….. 14
Installation Map …………………………………………………………………………………………………………………………………………………….. 18
Troubleshooting ………………………………………………………………………………………………………………………………………………….. 19
www.PyleUSA.com
2
www.PyleUSA.com
MATTERS NEEDING ATTENTION
1. When you turn on your navigation device, the GPS receiver must collect
satellite data and establish the current location. The time required to
acquire satellite signals varies based on several factors, including how far
you are from the location where you last used your navigation device, whether
you have a clear view of the sky, and how long it has been since you last used
your navigation device. The first time you turn on your navigation device, it
may take several minutes to acquire satellite signals. · Turn on the device. ·
Wait while the device locates satellites. · If necessary, go to an open area
away from tall buildings and trees.
2. When the product is located in the building, tunnel or around a tall
barrier, the system will be temporarily unable to provide you with the
positioning and navigation services. Generally, it takes at least 4 satellite
signals bars to complete the GPS positioning. If the weather is not good or
have dense obstacles, in a building this may affect the reception of satellite
signals.
3. Due to traffic or construction, navigation of electronic map data and
actual traffic directions may appear. In all cases, you must follow the road
status, site signs and other traffic rules. The company does not assume any
responsibility of traffic accidents and other various losses due to the misuse
of the product.
4. Do not the use this product outside of the power line standard. Do not
bend or squeeze power line by heavy force, to avoid short circuit, fire or
other accidents.
5. Software upgrades or update may cause may result to some interface,
functions and specifications change without notice.
6. This manual has been carefully checked, but does not rule out the
possibility of undiscovered errors. Please contact department of the company
for any notice.
7. The picture in this manual is for reference only.
www.PyleUSA.com
3
www.PyleUSA.com
PRODUCT OVERVIEW This product adopts high performance master control program
of quad core processor, 16GEMMC+1GDDR, master Control chip built-in GPS, Wi-Fi
and Bluetooth, before and after the dual camera, Android5.0 operating system.
Basic Function Introduction 1. Driving Video / Reverse Video:
Front 1080P HD camera, rear view 480P camera; double video display; lock
collision shadow; automatic circulation cleaning; Micro SD Memory Card
supported. 2. GPS Navigation: System preset IGO navigation map (offline
support map) Real-time road traffic support voice commands); users can also
download and install other personal favorite navigation softwares. 3.
Bluetooth: After the initial pairing, the two devices can connect
automatically each time you turn them ON.When your phone is connected to your
device, you are ready to receive calls. 4. 3G Internet: This product supports
3G traffic data online, you can achieve online navigation, online music
player, Parking remote monitoring and other functions. 5. FM Transmitter
Function: Built-in FM emission function, after pairing with your car speaker,
the voice will output with car speaker,give you a more wonderful driving
experience. when the car dvr sets up the same FM frequency as car radio
(eg.87.9), dvr will output the radio via FM transmitter function to your car
speaker. 6. Multimedia Entertainment: You can watch or play multimedia files
using Micro SD Memory Card
www.PyleUSA.com
4
www.PyleUSA.com
7. Voice Control Operation: Voice commands facilitate the experience and can
help you to concentrate on your driving and focus your attention on the road
and traffic situation. Voice control allows you to voice-activate certain
functions in the multimedia system.
8. Mobile APP Control: Users can download the phone APP and use through the
mirror settings / application interface two-dimensional code Vehicle
assistant.
9. System Upgrade: Upgrade through Micro SD Memory Card.
www.PyleUSA.com
5
www.PyleUSA.com
6
www.PyleUSA.com
QUICK GUIDE Power On and Shutdown
The device will power ON automatically; when the system is in a state of
dormancy or short press “Back Light / Power” button.
Key Wake System Power ON/OFF the ACC, the system will automatically pops up
the “dormant countdown” prompt box. When the countdown is done the system will
automatically shuts down; long press “Back Light / Power” button to display
“Restart / Hibernation” then select “Sleep” option to allow the system to
enter a state of dormancy and shuts down. The Power Button Function Boot:
Dormant state car ignition 2 seconds to boot. Shutdown (sleep) or restart:
Long press the power button for 2 seconds the boot state will pop up. The
operation of the dialog box options. Turn off the screen or light screen:
While on boot state; short press to switch the device to three modes (bright,
dark, off screen) Driving Video Recorder (DVR needs to insert Micro SD Memory
Card) In order to allow the system to automatically start capturing driving
video, before starting ensure that it has been inserted in the standard Micro
SD Memory Card Slot; boot and then insert Micro SD Memory Card card, the
system will automatically start capturing driving video.
www.PyleUSA.com
7
In order to ensure the normal driving operation system of the video and the
Micro SD Memory Card must meet the following specifications:
· The high speed Micro SD Memory Card should be SDHC compatible and reaches
C10 level
· Micro SD Memory Card capacity: 8~32GB No Micro SD Memory Card, video traffic
will not work; but can be used as normal camera preview screen.
· Can also use the automatic reverse image (reverse signal access to normal)
SYSTEM MAIN INTERFACE · Equipment boot, will automatically enter the main
interface (desktop), from here you can enter the other functional interface. ·
Also displays the related functional status, such as: system time information,
DVR video, Bluetooth, Wi-Fi, FM · Other states (depending on whether the
system is using these features)
Main interface of the function icon NAVIGATION Click on the main interface of
the “Navigation” button, the system has set up a High German navigation; high
navigation support offline map, High German online map host must be connected
to the network to use, only the High German online navigation in order to
support the system BLUETOOTH PHONE Click on the main interface of the
“Bluetooth” button; enter the Bluetooth phone interface, for initial use. It
is recommended to change the master Bluetooth device name, to easily
distinguish between Bluetooth devices; and then the phone to open the
Bluetooth, search specified name of the host Bluetooth device that can be used
after the connection; once the Bluetooth connection is successful, it will
prompt to request phone to download the address book, please click on the
phone to sync.
www.PyleUSA.com
8
www.PyleUSA.com
PLAY MUSIC Click on the main interface of the “music” button, you can enter the music application interface to display more music information. You can also play music using control button on the console directly to play music, select up and down other basic functions.
VIDEO PLAYBACK
Click on the main interface Button to enter the video preview interface,
and then click on the top right
button to enter the video file to view
and playback; or from the “application” to find “video playback” for viewing
and playback.
SETTINGS Click on the “Settings” button on the main interface, you can set the relevant settings for the machine, such as driving recorder. The Micro SD Memory Card files management: can be managed from the “advanced” option in the Android standard.
SET INTERFACE The default setting is able to meet most of the system. The video is set in the “parking automatic sleep” and “allow collision awaken” option, with suggestions. The user can enable the user according to the actual needs. Other functions, such as the connection File Browser, Wi-Fi view files, use the gallery to view video and pictures, browse the web pages, and so on, are in line with the default Android operating habits.
TWO, TRAFFIC RECORDING DVR Is important to prevent accidental damage or video data loss that are automatically cleaned or covered. Please backup your files.
www.PyleUSA.com
9
VIDEO IMAGE FILE Before or after boot insert Micro SD Memory Card, the system
will automatically starts double video camera before and after
· Any time can be suspended from the main interface or a driving video button
(if enabled), enter the video traffic VIEW VIDEO PREVIEW SCREEN Driving video
preview screen supports double preview on front, rear camera single screen
preview. SUPPORT OVERLAY TIME WATERMARK. · In order to save power, the preview
screen will exit timing (the length can be set in the DVR settings). SUPPORT
THE LOCK · Collision process (traffic video image can be preset, collision
strength) (collision) when the body was shaking, Automatically lock the image
files of the 20S before and after the collision, the file will not be saved
because of short video cycle and because of the relative lack of Micro SD
Memory Card space, the system will overwrite the locked images earlier. Remove
files to free up space to continue recording (the system functions Micro SD
Memory Card inserted) · PARKING MONITORING: if the user settings in the DVR
enabled collision wake-up function, then stop the dormant period · If a
collision (collision sensitivity can be set), the system will automatically
wake up, recording 30S Frequency, again automatically enter the sleep to save
the vehicles battery (do not shutdown or insert Micro SD Memory Card). This
feature will not be available. · Any reversing signal received under the host
computer, display will start automatically after the camera (cf. Examination
of Figure 4); reversing, reversing a security cordon, according to the actual
distance of the vehicle manual Adjust the visual distance of the safety
warning line; after the reverse signal disappears, the rear camera
automatically exits.
www.PyleUSA.com
10
www.PyleUSA.com
Schematic diagram of the rear view Front camera video quality can be selected high (1080P) or ordinary (720P); You can choose a sound recording video or mute microphone host.
VIDEO FILE PLAYBACK: There are two ways to view the current video file playback:
1. You can click on the main interface of the “DVR preview” button, travel video preview interface, click on the right angle button. : enters a list of video files. Here, the user can choose the video Time, before / after / double video files; you can delete the selected files. Click on a file, call the video player will jump to the specified time to start playing position on the main interface.
2. Click button, enter the system application list interface, and then click play. Here you can directly select the pre / post DVR file playback; in the playback interface can support the playback gesture.
the video file is divided into “can be recycled video files” and
“lock files” (recorded order)
The front camera video files “F” to start and begin time; to name after the camera. Header of the video file to “B” to start and add the recording start time to name. According to the available capacity of the Micro SD Memory Card, the earlier video files may have been circulating recording function.
www.PyleUSA.com
11
First click on the main interface of the navigation button, the system will
enter the current system default navigation applications; According to the
navigation system will show the current host installed all navigation
applications for user selection.
Navigation software interface BLUETOOTH PHONE First click on the main
interface button; will automatically enter the ” Bluetooth settings ”
interface
· recommend users to modify the equipment of the machine to facilitate the
search and check the name of Bluetooth
· on your Bluetooth mobile phone, go to “Bluetooth interface settings” · If
you need to connect other Bluetooth devices, please click “Re pairing” If the
pairing is completed, it is recommended to select the address book and allows
the simultaneous use of the machine to facilitate the “language in the mobile
phone terminal VOICE COMMAND FUNCTION (such as: answer, hang up, etc.)
Bluetooth phone configuration
12
www.PyleUSA.com
www.PyleUSA.com
· this machine does not support Bluetooth Headset mode. · Warning: in the
running process of manual operation and you really
need to use the phone, use the Voice commands to call. BT Switch
· Name of connected Bluetooth device · Bluetooth status · Modify the native
Bluetooth name · Bluetooth name of the machine · Ignore the current connection
· Bluetooth device, re open · Initial pairing FM FM LAUNCH · click on the main
interface of the “FM icon” button; enter the system
“FM launch” interface (below) · Click on the FM icon to open the FM launch
function, the host side of the
horn will mute the user. The radio frequency FM can be adjusted to the machine
“FM launch”. At the same frequency, your car radio can listen to the sound
output of the host at this time; The main interface FM launch status icon will
be lit. · If the FM emission is turned on, click Close FM to turn off the FM
transmitter function, the sound will be re emitted from the host’s speakers. ·
When the host FM is enabled you can adjust the emission frequency of FM
www.PyleUSA.com
13
MULTIMEDIA ENTERTAINMENT · Click on the main interface of system in music
button, and enter the music player interface. · If you need to play video or
pictures, click on the video from the main interface picture button, enter the
application interface, start Gallery; or through the” document management” ·
Find the corresponding multimedia files, click to start.
www.PyleUSA.com
14
www.PyleUSA.com
· Click on the main interface of the “Settings” button. Here you can adjust
the volume, screen brightness, time etc. To enter the Wi-Fi interface, scan or
connect to an APP or mobile phone through tachograph settings into video
interface settings related to traffic. · Advanced options to access more
settings such as: language, backup and reset.
Set (DVR Micro SD Memory Card Management) In order to prevent the non lock
files it is necessary to shut the door on vibration caused by the proposed
check automatically delete the earlier movie file lock option, otherwise it
easily lead to video file storage cycle length. When the system is slow or the
video effect is not good, you can try to format the SD card. In the video
settings interface, you can set the video and related options, such as: front
camera video quality (1080p or 720p), video and other conventional options are
silent.
www.PyleUSA.com
15
There are some special options, as follows: The Automatic Sleep: It is
recommended to choose “parking 15 minutes”, to ensure that when the device is
not in normal sleep, the host will be the two time dormancy to protect your
car. The Collision: Allow wake checked, so that when your car is parked after
encountering large collision, it can automatically start 30 seconds of video
at any time, to guard your car. The Automatic Exit Preview: recommended for 30
seconds, so as not to disperse driving attention, also can save power
consumption. MOBILE CLIENT CAR ASSISTANT Particularly the development of
Internet and mobile phone client mobile phone equipment. You can monitor and
manage using your mobile phone remote in real-time. Refer to the specific
functions of the client, “The operating instructions of the vehicle assistant”
SAFE TRAVEL RECORDS CAPTURE ARTIFACT Function Introduction: Vehicle management
and monitoring by mobile phone. Use the internet to capture the video cut
rider’s interactive sharing car life in real-time. Conditions and Product
Association 1. System version of the Android system in more than 4 of the
smart
terminal or apple system terminal. 2. Purchase the use of the company’s
terminal equipment. 3. Download and install
www.PyleUSA.com
16
www.PyleUSA.com
Installation Instructions 1. Ensure that the vehicle is in a power off state
2. Remove the original car host and host support and then the navigation
recorder host and host frame fixed in the original car windshield. 3. BMW will
be transferred to the line and the external transfers line to the
good and then extend the line along the car windshield edge into the car to
the car. 4. The host side of the original car line is divided into 4 B+
(Yellow line)
Open the box when the car is not turned on, using a DC block test with a
million 12V voltage that is connected to the (B+) ACC+ (Red line) Open the
box, in the start of the state of the car (do not start when the voltage is
0V) with a DC block test with a 12V voltage at the (ACC+). GND (Black line)
Open the safe box around the iron to find a reliable ground source to connect
(GND)
Reverse Control Line (Red line) Open rear end case, find the position of the
back lamp joint. Start the car, hang reverse gear (R) gear, 12V voltage;
neutral (N) to the end of the 0V line connected (reverse control line)
www.PyleUSA.com
17
INSTALLATION SKETCH MAP:
www.PyleUSA.com
18
www.PyleUSA.com
Note: The above 4 lines should be correctly connected to the host to avoid
problems. Note: Only A7 special type of car is above the power supply wiring,
A6 is a generic type of rearview mirror, power supply mode is inserted in the
cigarette lighter car charger to the power supply, do not need to pick up
1.2.3 points mentioned above mentioned connection mode. 5. Start the engine
and check if the machine has been installed correctly. 6. Adjust the camera
position, ensure that the lens picture recording center,
and check the basic functions of the navigation star search, FM launch, rear
view etc..
COMMON TROUBLESHOOTING If your product does not work properly, please do the
following method. If you still cannot rule out the problem, please contact our
customer service center. Question: The Navigation is not working Cause: 1. No
map, no signal, no GPS; 2. When in the process of upgrading the navigation, if
the Micro SD Memory
Card is removed, the map will be lost. Solution: 1. Change the map in the
Micro SD Memory Card or reinstall the same map
data APK and software 2. Upgrade the navigation software 3. Reconnect the
network Question: Record function not working Cause: 1. Micro SD Memory Card
is broken or didn’t inserted properly to the card
slot 2. The Micro SD Memory Card’s “lock file” is already saturated Solution:
- Please use Class 10 Micro SD Memory card or change the memory card 2. Reformat the Micro SD Memory Card. Question: Recording file get stucked Cause:
- The Micro SD Memory Card speed is low 2. Micro SD Memory Card Non-Genuine
or corrupted Solution: 1. Do not use lower than Class 8 Micro SD Memory Card,
please use Class 10
memory card. 2. Reformat the Micro SD Memory Card or replace a new memory card.
www.PyleUSA.com
19
Question: Noisy Radar speed measurement Cause: When driving through many
traffic lights in the city or driving along with high-profile vehicle that
have anti-collision radar; Solution: Turn off the Radar speed measurement,
turn down the volume or keep away from high-profile vehicle that have anti-
collision radar Question: Can’t use Voice Assistant Cause: 1. The device is
not connected with the internet 2. BT call status Solution: 1. Connect the
device to the internet 2. Finish the BT call ( Bluetooth call ) Question: Low
Voice nonrecognition or recognition rate Cause: 1. A lot of noise in the car
or you’re far away from the device 2. Tire pressure noise interference when
driving fast. 3. Voice deviate from system recognition voice instruction
Solution: 1. Please follow the voice instruction and don’t do any command 2.
Turn down the car volume 3. Please speak clearly Question: No FM sound Cause:
Mute button is ON or the FM-transmitter is open Solution: Increase the volume
or turn off the FM-transmitter Question: There’s sound even though the screen
is closed Cause: Close the screen or go to sleep mode; Solution: Short press
power switch switch back to day mode Question: System stops working Cause: Not
normal operation Solution: 1. Please press the “Reset” switch. 2. Long press
power switch for 3 seconds and choose reboot 3. Go to ” setting”
–“other”–“restore factory setting”
www.PyleUSA.com
20
www.PyleUSA.com
Question: Dim and hazy recorded video Cause: 1. The camera lens or car Glass is dirty 2. The camera angle is not suitable Solution: 1. Keep the camera lens and car glass clean 2. Adjust the camera angle, not too much lower or higher 3. Please double check, if the camera lens protective film is out Question: The device is working slowly Cause: Too many software or APP working in the background or too much downloaded or installed third-party software Solution:
- Close the software and APP that you are not using 2. Uninstall some third-
party software to clear more system space 3. Reboot
FEATURES: · Dual Camera Video Recording System · Video Recording DVR: Save Video from Both Cameras · Front Dash Cam: 1080p Dashboard Mount Cam · Rear Backup Cam: 720P Compact Exterior Mount Rearview Bumper Cam · PiP (Picture-in- Picture) On-Screen Dual Cam Viewing · Ability to Snap Pictures & Record Video · GPS Navigation System with Data Recorder · Includes All Necessary Cables/Wires for Installation · Android Quad Core Computer · Wi-Fi Connectivity Support · Bluetooth Hands-Free Call Answering · 7” inch Touch Screen Display · Built-in Rechargeable Battery · Micro SD Memory Card Raeder · Digital Media File Playback · 16GB Internal Storage Memory · FM Radio Receiver · Angle Adjustable Tilting Screen · Parking Surveillance Mode: Automatic Power-On & Record Function
www.PyleUSA.com
21
ANDROID OS COMPUTER: · Touchscreen ‘Tablet-Style’ Functionality · Wi-Fi
Wireless Streaming Connectivity · Search & Surf the Web, Download Apps ·
Browse the Google Play Store · Multi-Touch Capacitive Display Screen · 3G WiFi
Mobile HotSpot Capability · Processor: Quad Core 1.3 Ghz · OS Version: Android
5.0 (Lollipop) WIRELESS BLUETOOTH CONNECTIVITY: · Hassle-Free Pairing, Simple
Music Streaming · Built-in Microphone for Hands-Free Calling · Compatible with
All of Today’s Latest Bluetooth Devices · (Smartphones, Tablets, Laptops,
Computers, etc.) · Bluetooth Version: 4.0 · Bluetooth Network Name: `SURVEIL’
· Wireless Range: Up to 32′ ft. WHAT’S IN THE BOX: · Dash-Cam Monitor ·
Rearview Backup Camera · GPS Antenna · Car Charger · Power Wiring Harness
TECHNICAL SPECS: · Screen Resolution: 1280 x 480 Pixels · Video System:
PAL/NTSC Auto Switching · Angle Adjustable Tilting Screen: 45° Degree · Backup
Camera Resolution: 420 TV Lines · Image Sensor: 1/4” Color CMD · Supports HD
Multimedia Video MP3, MP4, FLASH Play, RMVB · Rechargeable Battery: 3.7V
Lithium, 800mah (2.96wh) · Camera Power Cord Length: 19.6′ ft. · Power: DC 12V
(USB 5V, 2A) · Camera Dimensions (L x W x H ): 0.91” x 0.91” x 0.91” -inches ·
Monitor Dimensions (L x W x H ): 7.60” x 3.15” x 3.94” -inches · Sold as: Unit
www.PyleUSA.com
22
www.PyleUSA.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>