ENFORCER Surface-Mount Contacts Specifications

Capsule-Type
Surface-Mount Contacts
SM-4004-TQ/W
SM-4004-LQ/W
Manual

SM-4004-TQ/W shown

• Miniature capsule-type magnetic contacts

• Gold-plated external screw terminals for longer life and reliability with tape to cover terminals (SM-4004-TQ only)

• 18″ (46cm) Wire leads from the center (SM-4004-LQ only)

• Adhesive mounting (double-sided tape included)

• SPST, iridium-plated to have a high melting point and
  Vickers hardness for higher power handling and a longer expected life (SM-4004-TQ), or ruthenium on gold underplating for a longer expected  life (SM-4004-LQ)

• For closed-loop circuits

• 1″ (25mm) Gap (SM-4004-TQ/W)

• 3/4″ (19mm) Gap (SM-4004-LQ/W)

• Lifetime limited warranty

Parts List

1. 10x Contact switches
2. 10x Magnets
3. 1x Manual

Specifications

Leads from center
Material| Case| High-impact ABS plastic
Contacts| Iridium plating| Ruthenium on
gold underplating
Contact rating| 1.0A@10VDC (max.)
10W (max.)
Operating temperature| -150-160° F (-250-70° C)
Switch cycles| 50 Million (0.1mA@5VDC)
Dimensions| Switch| 1″x3/8″x1/4″ (25x10x6 mm)
Magnet| 1″x3/8″x1/4″ (25x10x6 mm)
Magnet type| Rare-earth neodymium

Overview

Protected side of the door/window.

Installation

Please read the manual carefully before you begin the installation.

1. Mount the contact above the door or window on the frame. For doors, ensure that the mounting is farthest from the hinged side of the door.
2. Connect the two wires to the alarm control panel.
3. Mount the magnet on the door/window so that it will face the contact. Be sure that the gap between the contact and magnet does not exceed 1″ (25mm) for the SM-4004-TQ/W or 3/4″ (19mm) for the SM-4004-LQ/W.

California Proposition 65 Warning: These products may contain chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

LIMITED LIFETIME WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for the lifetime of the product. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. Under no circumstances will SECO-LARM be responsible for any costs or charges for removal, installation, or reinstallation. This Warranty is void if the damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to repair or replacement only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else. This lifetime limited warranty is for products
sold and installed in the United States and Canada. For all other countries, the warranty is 1 (one) year.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2021 SECO-LARM U.S.A., Inc. All rights reserved.

U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: 949-261-2999 | 800-662-0800
Website: www.seco-larm.com
Email: sales@seco-larm.com

MI_SM-4004-xQ_210804_ML.DOCX

References

• La Armería de Madrid - fabricantes de armas y rifles
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>