ULINE H-8027 IBC Hose Installation Guide
- June 7, 2024
- ULINE
Table of Contents
H-8027 IBC HOSE
1-800-295-5510
uline.com
PARTS
ASSEMBLY
- Unscrew 2″ IBC bung opening and screw on female IBC Fitting. (See Figure 1)
- Connect one end of the hose to female IBC fitting. (See Figure 2)
- Apply plumber’s tape on the threading of the male nozzle fitting and screw it into the bottom of the nozzle. (See Figure 3)
- Connect the male nozzle fitting to the opposite end of the hose. (See Figure 4)
- Attach the hanging bracket to IBC Cage. (See Figures 5-6)
OPERATION
- Once IBC hose is fully assembled, turn the bottom valve to the on position. (See Figure 7)
- Pull handle trigger to dispense IBC contents. Nozzle trigger can be locked in the dispensing position by pressing down on the nozzle button. (See Figure 8)
NOTE : Recommend using IBC hose with top IBC when stacked two high.
NOTE: Always store IBC hose on hanging bracket when not in use.
NOTE: Only use IBC hose with liquids compatible with IBC hose materials.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>