JLAB EPICAIR Sport ANC TWS Bluetooth Wireless User Manual

JLAB EPICAIR Sport ANC TWS Bluetooth Wireless

FIRST TIME SETUP

AUTO-CONNECTING EARBUDS

• Take earbuds out of the charging case and remove stickers.
• Press and hold 3+ seconds on each earbud, Blinking blue and white light on one earbud will indicate ready to pair to your device.

CONNECTING BLUETOOTH
Select “Epic Air Sport ANC” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.

ADDING NEW/ADDITIONAL BLUETOOTH DEVICES
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Take earbuds out of the case. Earbuds will automatically enter Bluetooth Pairing. Select “Epic Air Sport ANC” in new device settings to connect.

FITTING

CONTROLS

MUSIC/ MOVIE MOODE:
Press and hold both touch sensors simultaneously 3+ seconds

POWER OFF WITHOUT CHARGING CASE:
Turn off your Bluetooth from your device settings. The earbuds will then power off after 3 minutes.

DOWNLOAD THE APP

Customize Epic Air Sport ANC features and update the latest software.
Download the JLab Air ANC App in Apple/Google Play Store

AUTO-PoWER ON/OFF

1. Placing the earbuds in the charging case will power OFF earbuds and start charging.
   Blue lights indicate earbuds are charging and will turn OFF when fuly charged.

2. When taken out of the charging case, they will auto-power ON and connect

WIRED CHARGING 

wireless CHARGING
Place the charging case on a wireless charging platform.

QUICK TIPS

The left or right earbud can be used independently for music and phone calls. Simply choose one and take out from the case to connect.
Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on chosen device to connect.
Fully dry off earbuds before putting in the charging case to avoid any damage to the case.
For full User Manual and troubleshooting, please visit JLABAUDIO.cOM

FITTING

VOICE PROMPTS

• “Hello”: Power ON
• “Ready to Pair”: Epic Air Sport ANC is ready to pair to your Bluetooth device
• “Be Aware”: Hear your surroundings
• “ANC Low”: Noise-canceling low
• “ANC High”: Noise-canceling high
• “Bluetooth Connected”: Earbud is connected to the device
• “Battery Full”: 100-75%
• “Battery Medium”: 75-25%
• “Low Battery”: Less than 25%6 (When power decreases to 10%,
• “Low Battery” will play one time)
• “Goodbye”: Power OFF

EQUALIZER MODES

• JLab SIGNATURE

• JLab C3TM signature sound with amplified vocals and bass
  Customize the EQ settings by downloading the JLab Air ANC App n Apple/Google Play Store
  288 BALANCED

• Even sound with no additional sound enhancements 888 BASS BOOST

• Amplified bass and sub-bass

WARNING
Fully dry off the earbuds before placing in the charging case.
If the earbuds are damp or wet, this will cause damage to the charging case.
The warranty will be voided if the charging case shows damage by water/sweat.

TROUBLESHOOTING

No audio in one earbud or earbuds are disconnected (Manual Reset)

1. Enter your Bluetooth device settings and forget the Epic Air Sport ANC. Fig (A
2. Keep the earbuds in the charging case and on ONE earbud quickly tap the touch sensor 7x times. Light blinks blue 3 times. Fig
3. Repeat with other earbuds. Quickly tap the touch sensor 7x times. Light blinks blue 3 times. Fig G
4. Take both earbuds out of the charging case. Wait for Left earbud to turn solid white and Right to blink blue/white. You are now ready to p your Bluetooth device.

Bluetooth device does not connect/reconnect

1. Enter your Bluetooth device settings and forget the Epic Air Sport ANC. Fig  A

2. Turn OFF then ON Bluetooth. Fig B

3. Take the earbuds out of the case.
   Wait for one to turn solid white and one to blinking blue/white.

4. Select “Epic Air Sport ANC” in device’s settings to reconnect.

Shop products Product alerts | Burn-in your headphones

**US Compliance

**

FCC Information
This equipment has been tested and found to comply with the limits for a Class B igital device pursuant to Part 15 of the FOC Rules. These limits are designed to provide reasonable protection against hamful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turming the equipment off and on, he user is encouraged to try to correct the interference by one or more of the following measures:
FCC ID: 2AHYV- EAIRSPRTNC

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  If you cannot eliminate the interference, the FOC requires that you stop using your product.

Changes or modifications not expressly by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU Compliance
CE
PEAG LLC dba JLab Audio hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the RED directive.
A copy of the EU Declaration of Conformity is available at labaudio.com/compliance JLab Audio
2281 Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USA
The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines.

Battery Caution & Disposal Information

Please take care of your battery. Do not; disassemble, burn, puncture, crush or bend your battery.
Improper Operation of the battery may prOduct simoKe. In such an event, Ventilate the area.
Extinguish any lames with carton dioxide, dry-powder tire extinguisher, or cover with sand or mud.
Take care to avoid conditions of excessive moisture for prolonged periods and do not immerse.
Do not expose to temperatures above 50°C/122° F. Charge the battery fully before storage or if stored for longer than three months.

Disposal
At the end of ts lite, please take care to dispose of this product responsibly. Electronic products and batteries contain materials that can be harmful to the environment. Please do not dispose to unsorted waste, Take your electronic waste to a designated collection or recycling facility to be recycled properly. Your local council authority will be abe to tel you where your nearest facilities are. There may De one at your local Supermarket.

Contact Us

If you’re unsatisfied with your purchase, please contact us and we’ll take care of youl!
You can contact our US based customer support team:
Website: jlabaudio.com/contact
Email: support@jlabaudio.com
Phone U.S.: +1 405-445-7219 (M-Th 8am- 5pm, F Bam-3pm PT)
Phone U.K.: +44 (20) 3884 3322 (M-Th 1600-0100, F 1600-2300 GMT
Visit jlabaudio.com/warranty to initiate a return or exchange.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>