EXCLUSIVE HOME ER1028-02 Double Curtain Rod Kit in Gunmetal Installation Guide
- June 8, 2024
- EXCLUSIVE HOME
Table of Contents
EXCLUSIVE HOME ER1028-02 Double Curtain Rod Kit in Gunmetal
TOOLS NEEDED
You will need
PARTS
INSTALLTION INSTRUCTIONS
-
Unscrew back plate from rod with a screwdriver, Using back plates as a guide, locate the desired positions, Create markings on wall for the mounting screws.
-
Set aside back plates, Drill holes into wall where marked with 1 /4 in. drill bit.
-
Insert wall anchors. Wall anchors are not necessary if screwing into the wooden batten. Attach back plate to wall using screws provided.
-
A. Connect the six-piece rod together. The rod with the largest diameter is the middle piece. B. Slide assembled rod into the back plates
-
Place support bracket in the center. Create markings on wall for the mounting screws. Take down the assembled rod from the back plates.
-
Drill holes into wall where marked with a 1/4 in drill bit. Insert wall anchors. Wall anchors are not necessary if screwing into the wooden batten. Attach bracket to the wall using the screws provided.
-
Remove right rods from middle rods. Slip the curtain panels on to the left rods. Slip the curtain panels on to the right rod and slide right rods back into the middle rods. Place rods with curtains into the back plates and center support.
-
Tighten the screws on the back plates and center bracket to secure rod.
-
Wrap and adjust panels around both ends of the rod so the panels hang flush with the wall.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>