ULINE H-7645 30″ Wide Area Vacuum User Guide

ULINE H-7645 30″ Wide Area Vacuum User Guide

1-800-295-5510
uline.com

ROUTINE MAINTENANCE

DAILY

1. Check Dust Bag – Before each use, check the disposable paper HEPA filter and empty if three-quarters full or more.
2. Belt Condition – Check the belt for signs of wear. Change the belt when it is loose or has cuts or cracks. Refer to the diagram on the underside of the base for proper installation of belt and brushroll.
3. Supply Cord and Plug – Check supply cord and plug for any cuts or damage. If damaged, have the supply cord and plug assembly replaced by the Uline service team.
4. Motor – If there are unusual sounds or if poor performance occurs, the motor should be inspected immediately by the Uline service team.

WEEKLY

1. Cloth Dust Bag – Inspect the cloth bag assembly for any unusual wear or tears. Replace worn bag with genuine Tornado bags.
2. Brush Roll Condition – Check for and remove any loose material such as string or hair wrapped around the brushroll.
3. Filter – Check all filters for clogs and replace as needed.

MONTHLY

1. Cleaning – Inspect and clean the vacuum, including the fan chamber and under the hood.
2. Electrical – Inspect the cord assembly for wear and check for proper handle assembly.
3. Handle – Check the handle assembly for tightness, and replace handle bolts if missing.
4. Motor – Inspect the motor every six months for any damage. Inspect the motor immediately if there are any unusual sounds or if poor performance occurs.
5. Filter – Check all filters for clogs and replace as needed.

0621 RH-7645

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>