Millenium Dual phantom power adapter PP2B User Guide
- June 7, 2024
- Millenium
Table of Contents
Dual phantom power adapter PP2B
Quick Start Guide
This quick start guide contains important information on the safe operation
of the product. Read and follow the safety advice and instructions given.
Retain the quick start guide for future reference. If you pass the product on
to others please include this quick start guide.
Safety instructions
Intended use
This device serves as a source for phantom power for the operation of suitable
microphones. Any other use or use under other operating conditions is
considered to be improper and may result in personal injury or property
damage. No liability will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! Never let children unattended use electrical devices.
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners, or flammable cleaning agents.
- Disconnect the device from the mains power supply when it is not in use.
Operating
- Connect up to two microphones requiring phantom power for the operation to the inputs [MIC 1] and [MIC 2].
- Select the appropriate voltage, [12 V] or [48 V], for the connected microphones with the ‘Phantom Voltage’ switch.
- Use the enclosed plug-in mains adapter to power the device or insert 2 × 9 V batteries into the battery compartment for the power supply.
- Connect the device that is to process the microphone signals to the outputs [MIC 1] and [MIC 2].
- Since the device contains no preamps, no signal amplification takes place.
Technical specifications
Phantom power | 12 V or 48 V switchable |
---|---|
Inputs | 2 × XLR panel socket |
Outputs | 2 × XLR panel plug |
Switch | 12 V / 48 V switchable |
Power supply | External power adapter, 100 – 240 V ~ 50/60 Hz or 2 × 9 V |
battery
Operating voltage| 12 V / 150 mA, centre negative
Dimensions (W × H × D)| 143 mm × 93 mm × 45 mm
Weight| 485 g
Ambient conditions| temperature range 0 °C…40 °C
relative humidity 20 %…80 % (non-condensing)
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these
materials with your normal household waste, but make sure that they are
collected for recycling. Please follow the notes and markings on the
packaging.
Batteries must not be disposed of as domestic waste or thrown into the fire.
Dispose of batteries according to national or local regulations regarding
hazardous waste. Dispose of empty batteries at appropriate collection sites.
This product is subject to the European Waste Electrical and Electronic
Equipment
Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal firm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult
your local waste disposal facility.
Thomann GmbH
- Hans-Thomann-Straße 1
- 96138 Burgebrach
- www.thomann.de
- info@thomann.de
DocID: 235771_16.06.2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>