TELTONIKA RB142 Modem Antennas Compad Electronics User Guide

TELTONIKA RB142 Modem Antennas Compad Electronics User Guide

HARDWARE

FRONT VIEW

BACK VIEW

POWER SOCKET PINOUT

DB9 CONNECTOR PINOUT

1. Not used.
2. Received Data (RX) – output.
3. Transmitted data (TX) – input.
4.  Not used.
5. Ground (GND).
6. Not used.
7. Request data to send (RTS) – input.
8. Clear data to send (CTS) – output.
9. Not used.

FEATURES

HARDWARE INSTALLATION

1. Unscrew two back panel hex bolts and remove the back panel.
2. Insert your SIM card into the SIM socket.
3. Attach the panel and tighten the hex bolts.
4. Attach the mobile antenna (max torque 0.4 N·m / 3.5 lbf·in) and connect the USB cable.
   

LOGIN TO DEVICE

1. Power on the device and connect the USB cable to your
2. Allow the gateway to boot up. This might take up to 30 seconds.
3. Your computer’s OS should detect the USB device and install the
4. To enter the gateway’s Web interface (WebUI), type http://192.168.2.1into the URL field of your Internet browser.
5. Use login information shown in image A when prompted for
6. After logging in pay attention to the Signal Strength indication displayed in the Mobile widget (image B). To maximize the cellular perfor- mance try adjusting the antennas or changing the location of your device to achieve the best signal

TECHNICAL INFORMATION

Radio specifications

RF technologies| 2G, 3G, 4G
Max RF power| 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE
Bundled accessories **specifications*
Power adapter| Input: 0.4A@100-240VAC, Output: 9VDC, 0.5A, 4-pin plug
Mobile antenna| 698~960/1710~2690 MHz, 50 Ω, VSWR<2, gain 2 dBi, omnidirectional, SMA male connector

WHAT’S IN THE BOX?

STANDARD PACKAGE CONTAINS*

• TRB142
• 4.5 W PSU
• 1 x LTE antenna (magnetic mount, SMA male, 3 m cable)
• Micro-USB cable (0.8 m)
• 1 x hex key
• QSG (Quick Start Guide)
• RMS flyer
• Packaging box

TRB142 SPATIAL MEASUREMENTS & WEIGHT

MAIN MEASUREMENTS
W x H x D dimensions for TRB142
Device housing*:
Box:
74.5 x 25 x 64.4
173 x 71 x 148

TOP VIEW

The figure below depicts the measurements of TRB142 and its components as seen from the top:

RIGHT VIEW

The figure below depicts the measurements of TRB142 and its components as seen from the right side:

FRONT VIEW

The figure below depicts the measurements of TRB142 and its components as seen from the front:

REAR VIEW

The figure below depicts the measurements of TRB142 and its components as seen from the back:

MOUNTING SPACE REQUIREMENTS

The figure below depicts an approximation of the device’s dimensions when cables and antennas are attached:

DIN RAIL

The scheme below depicts protrusion measurements of an attached DIN Rail:

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>